McAlpine Plumbing TSG50 Sheet Floor Gully Conversion Kit Installation Guide
- June 16, 2024
- McAlpine Plumbing
Table of Contents
SECTION TWO 02
For further technical information on any of our products please visit our website www.mcalpineplumbing.com
Wet Room Products
McAlpine has been at the forefront of developing drainage solutions for all kinds of wet rooms and wet floor areas. In this section you’ll find stylish, yet unobtrusive drainage solutions for wet rooms. Our products are both sleek and functional.
Our Channel Drains are suitable for tiled floors in applications as diverse as domestic bathrooms, hotels, spas, hospitals and sport and leisure facilities. Every McAlpine Channel Drain comes complete with body, cover plate, trap with UK outlet and accessories, so ordering could not be simpler.
CD600-B Shown Above
02 FLOOR GULLIES
PRODUCT GUIDE
McAlpine Shower & Floor Gullies
PRODUCT BENEFITS:
- Manufactured in High Quality ABS , McAlpine Gullies comply to BS EN 1253-1: 2015 and BS EN 1253-2: 2015.
- Flow rates of 48 litres per minute exceed the minimum requirement of EN 1253-2:2003 & are variable dependent on the grating or cover plate used.
- Range of Trapped Shower Gullies (TSG) available with 50mm, 60mm & 75mm water seal, Untrapped Shower Gullies (USG) for use with pumped waste and Valve Shower Gullies (VSG) for use in floors where depth is restricted.
- Choice of Horizontal or Vertical outlet.
- All Gullies have top access for easy cleaning.
The only sealant Tested and Approved for use with McAlpine Plumbing Products
Gullies for use with Sheet Flooring
Trapped Gullies
Product
| Code| Securing Screws| Flow Rate (l/min)| Cover Plate|
Outlet Size| Socket Reducer| Water Seal| Overall Depth
---|---|---|---|---|---|---|---|---
| TSG1-WH| | 53|
(1)
|
2”
| 2” x 1½”| 75mm|
130mm
TSG1WH-NSC
| | 53| (2)
TSG1SS| | 50|
(3)
TSG1SS-SL-SC
| | 53.6| (4)
TSG1SS-SL-NSC| | 53.6|
(5)
TSG1-ANTI/LIG
| | 31| (6)
| TSG50WH| | 50.5| (1)| 2”| 2” x 1½”| 50mm|
100mm
TSG50WH-NSC
| | 51| (2)
TSG50SS| | 48|
(3)
TSG50SS-SL-SC
| | 50.3| (4)
TSG50SS-SL-NSC| | 50.3|
(5)
TSG50-ANTI/LIG
| | 44| (6)
| TSG52WH| | 50.5| (1)| 2″| 2” x 1½” (and 2″ swivel outlet
fitting)| 50mm|
100mm
TSG52WH-NSC
| | 51| (2)
TSG52SS| | 48 |
(3)
TSG52SS-SL-SC
| | 50.3| (4)
TSG52SS-SL-NSC| | 50.3|
(5)
TSG52-ANTI/LIG
| | 44| (6)
| TSG2WH| | >70| (1)| 110mm| 110mm x 2”| 75mm|
130mm
TSG2WH-NSC
| | >70| (2)
TSG2SS| | >70|
(3)
TSG2SS-SL-SC
| | >70| (4)
TSG2SS-SL-NSC| | >70|
(5)
TSG2-ANTI/LIG
| | >70|
(6)
Cover Plates
1. White Plastic with Screws
2. White Plastic No Screws
3. Polished Stainless Steel
4. Chrome Plated Brass
5. Chrome Plated Brass No Screws
6. Stainless Steel Anti-Ligature
= Flow Rate
Untrapped Gullies
Product
| Code| Securing Screws| Flow Rate (l/min)| Cover Plate|
Outlet Size| Socket Reducer| Overall Depth
---|---|---|---|---|---|---|---
| USG1WH| | 10| (1)| 22mm| –|
45mm
USG1WH-NSC
| | (2)
USG1SS| |
(3)
USG1SS-SL-SC
| | (4)
USG1SS-SL-NSC| |
(5)
|
USG2WH
| | 68| (1)| 2”| 2” x 1½”| 71mm
USG2SS| |
(3)
USG2SS-SL-SC
| | (4)
USG2SS-SL-NSC| |
(5)
|
USG3WH
| | 65| (1)| 1½”| –| 71mm
USG3SS| |
(3)
USG3SS-SL-SC
| | (4)
USG3SS-SL-NSC| |
(5)
Benefits of Anti-Ligature Gullies
- Shower gullies with anti-ligature grating have been designed for use in secure accommodation
- Grating is home office approved
- All gullies supplied with security screwdriver bit to release anti-ligature grating
The only sealant Tested and Approved for use with McAlpine Plumbing Products
Do not pour drain cleaner down these products. Do not use acetoxy silicone with these products.
Gullies for use with Tiled or Stone Flooring
Trapped Gullies
Product
| Code| Securing Screws| Flow Rate (l/min)| Cover Plate|
Outlet Size| Socket Reducer| Water Seal| Overall Depth
---|---|---|---|---|---|---|---|---
| TSG1T6SS| | 55| (A)| 2”| 2” x 1½”| 75mm|
130mm
TSG1-T150SS
| | 55| (B)
TSG1T6WH| | 55|
(C)
TSG1-R125SS
| | 56.9| (D)
| TSG50T6SS| | 52.6| (A)| 2”| 2” x 1½”| 50mm|
100mm
TSG50-T150SS
| | 53.6| (B)
TSG50T6WH| | 52.5|
(C)
TSG50-R125SS
| | 54.3| (D)
| TSG52T6SS| | 52.5| (A)| 2”| 2” x 1½” (and 2″ swivel outlet
fitting)| 50mm|
100mm
TSG52-T150SS
| | 53.6| (B)
TSG52T6WH| | 52.5|
(C)
TSG52-R125SS
| | 54.3| (D)
| TSG2T6SS| | >70| (A)| 110mm| 110mm x 2”| 75mm|
130mm
TSG2-T150SS
| | >70| (B)
TSG2T6WH| | >70|
(C)
TSG2-R125SS
| | >70|
(D)
Tiles & Gratings
A. 150mm Square Polished Stainless Steel
B. 150mm Square Polished Stainless Steel No Screws
C. 150mm Square White ABS
D. 125mm Circular Polished Stainless Steel
= Flow Rate
Untrapped Gullies
Product
| Code| Securing Screws| Flow Rate (l/min)| Cover Plate|
Outlet Size| Socket Reducer| Overall Depth
---|---|---|---|---|---|---|---
| USG1T6SS| | 10| (A)| 22mm| –|
45mm
USG1-T150SS
| | 10| (B)
| USG2T6SS| | 68| (A)| 2”| 2” x 1½”|
71mm
USG2-T150SS
| | 68| (B)
| USG3T6SS| | 65| (A)| 1½”| –|
71mm
USG3-T150SS
| | 65|
(B)
The only sealant Tested and Approved for use with McAlpine Plumbing Products
Do not pour drain cleaner down these products. Do not use acetoxy silicone with these products.
= Flow Rate
Gullies with Non Return Valve
VSG Gullies for use with Sheet Flooring
Product
| Code| Securing Screws| Flow Rate (l/min)| Cover Plate|
Outlet Size| Overall Depth
---|---|---|---|---|---|---
| VSG1WH| | 30| (1)| 1½”|
75mm
|
VSG1WH-NSC
| | 30| (2)| 1½”| 85mm
| VS52WH| | 30| (1)| 1½”|
75mm
|
VSG52-SL-WH
| | 30| (2)| 1½”| 59mm or 81mm
| VSG52SL-T6SQ-B| | 30| | 1½”|
59mm or 81mm
VSG Gullies for use with Tiled or Stone Floors
Product
| Code| Securing Screws| Flow Rate (l/min)| Tile Grating|
Outlet Size| Overall Depth
---|---|---|---|---|---|---
| VSG1T6SS| | 30| (A)| 1½”|
75mm
| VSG52T6SS| | 30| (A)| 1½”|
85mm
Cover Plates & Tiles
1. White Plastic
2. White Plastic No Screws
A. 150mm Square Polished Stainless Steel
Gullies with Non Return Valve
McAlpine Gullies with Non Return Valve
Product shown is for sheet flooring installation only.
- Choice of cover plates with or without screws
- Non-return valve
- Clamp ring with 4 x M6 stainless steel screws
- Gully body with 1½” BS EN 1329-1: 2020 solvent weld horizontal outlet
The only sealant Tested and Approved for use with McAlpine Plumbing Products
Top Access Shower Traps for use with Wet Rooms
= Flow Rate
Top Access Shower Traps for use with Sheet Flooring
Product
| Code| Securing Screws| Flow Rate (l/min)| Cover Plate|
Outlet Size| Water Seal| Overall Depth
---|---|---|---|---|---|---|---
| TSG1WH-STW1R| | 35| (1)| 1½ Compression| 19mm|
138mm
|
TSG1WH-STW2R¹
| | 37| (1)| 1½ Compression| 50mm|
167mm
Top Access Shower Traps for use with Tiled or Stone Floors
Product
| Code| Securing Screws| Flow Rate (l/min)| Tile Grating|
Outlet Size| Water Seal| Overall Depth
---|---|---|---|---|---|---|---
| TSG1T6SS+STW1-R| | 35| (A)| 1½ Multifit| 19mm Shallow Seal|
138mm
|
TSG1T6SS-STW2R¹
| | 37| (A)| 1½ Multifit| 50mm|
167mm
Cover Plates & Tiles
1. White Plastic
A. 150mm Square Polished Stainless Steel
- All top access shower traps are resealing.
Tiles & Gratings
Product
| Code| Description
---|---|---
| FGTOP6SS|
150mm Square Polished Stainless Steel Tile
with removable grid and securing screws. Tile has ABS spigot adaptor for solvent welding to clamp ring
|
FGT150TOP
| 150mm Square Polished Stainless Steel Tile
with removable grid. Tile has a removable ABS spigot adaptor for solvent welding to clamp ring leaving a rubber gasket to fit inside 110mm pipe
| MDTOP-WH|
150mm Square White ABS Tile
with removable grid. Tile has spigot adaptor for solvent welding to clamp ring
|
MDTOP20-WH
| 200mm Square White ABS Tile
with removable grid. Tile has spigot adaptor for solvent welding to clamp ring
| FGTR125TOP|
125mm Diameter Polished Stainless Steel Grating
with removable grid. Grating has a removable ABS spigot adaptor for solvent welding to clamp ring leaving a rubber gasket to fit inside 110mm pipe. Suitable for stone shower bases
The only sealant Tested and Approved for use with McAlpine Plumbing Products
Gullies suitable for Concrete Ground Floors where Waterproofing
Membrane is not required.
Product
| Code| Description
---|---|---
| MD100|
Multi-Drain – 60mm Water Seal Trapped Floor Gully
with 2”/3” solvent weld horizontal outlet. Height can be extended by solvent welding length of 110mm PVC pipe between gully body and tile. Inlet connections are for solvent welding to 11/2” ABS/PVC pipe, internal fit or 2” ABS/PVC pipe, external fit. Overall height 152mm.
|
MD100-3
| Multi-Drain – 60mm Water Seal Trapped Floor Gully
with 3″ solvent weld horizontal outlet. Height can be extended by solvent welding length of 110mm PVC pipe between gully body and tile. Inlet connections are for solvent welding to 11/2” ABS/PVC pipe, internal fit or 2” ABS/PVC pipe, external fit. Overall height 152mm.
| MD200|
Multi Drain Inlet Fitting
2” solvent weld x 2” compression
|
MD400
|
Multi Drain Outlet Fitting
3” x 110mm solvent weld
Pain Relief For Knees That Work
Stop Your Knees From Being a Pain
75% of plumbers have knee problems
(IPG survey)
For more info:
www.mcalpinekneepads.com
Conversion Kits 75mm Water Seal
Conversion Kits from Tiled to Sheet Flooring 75mm Water Seal
| Converts any TSG1 or TSG2 to sheet flooring gully with dip tube CP
brass clamp ring, CP Stainless Steel grated cover plate without securing
screws.
---|---
Code:|
FGTR118TOP
| Converts any TSG1 or TSG2 Gully to a sheet flooring gully with dip
tube, White plastic clamp ring, white plastic cover plate with securing
screws.
Code:|
TSGCONTV
| Converts any TSG1 or TSG2 Gully to a sheet flooring gully with polished
Stainless Steel clamp ring, cover plate and dip tube.
Code:|
TSGCONTVSS
Conversion Kits from Sheet to Tiled Flooring 75mm Water Seal
| Converts any TSG1 or TSG2 Gully to a tiled floor gully with white ABS
clamp ring 150mm polished Stainless Steel tile with removable grid securing
screws and dip tube.
---|---
Code:|
TSGCONVSS
| Converts any TSG1 or TSG2 Gully to a tiled floor with White ABS clamp
ring, 150mm Sq White tile with removable grid and dip tube.
Code:|
TSGCONV
Conversion Kits 50mm Water Seal
Conversion Kits from Tiled to Sheet Flooring 50mm Water Seal
| Converts any TSG50 or TSG52 Gully to a Sheet flooring gully with dip
tube, CP brass clamp ring, CP Stainless Steel grated coverplate with securing
screws.
---|---
Code:|
FGTR118TOP-50
| Converts any TSG50 or TSG52 Gully to a sheet flooring gully with dip
tube, white plastic clamp ring, white plastic cover plate with securing
screws.
Code:|
TSGCONTV-50
| Converts any TSG50 or TSG52 Gully to a sheet flooring gully with
polished Stainless Steel clamp ring, cover plate and dip tube.
Code:|
TSGCONTVSS-50
Conversion Kits from Sheet to Tiled Flooring 50mm Water Seal
| Converts any TSG50 or TSG52 Gully to a tiled floor gully with white ABS
clamp ring 150mm polished Stainless Steel tile with removable grid securing
screws and dip tube.
---|---
Code:|
TSGCONVSS-50
| Converts any TSG50 or TSG52 Gully to a tiled floor with White ABS clamp
ring, 150mm Sq White tile with removable grid and dip tube.
Code:|
TSGCONV-50
Conversion Coverplate with 1 ½” Compression Inlet
| For use with TSG1, TSG2, TSG50 and TSG52 shower gullies for sheet
flooring. Used to seal off gully or to convert to a drain connection to allow
for installation of a bath waste.
---|---
Code:|
CPTSG
150mm Stainless Steel Tile with Internal Non-Return Valve
Tile with Non-Return Valve
PRODUCT BENEFITS:
- Suitable for wet floor areas where 4″/110mm drainage pipework has been installed to the finished floor level and no waterproofing membrane is required
- The internal non-return valve prevents foul air entering the building
- The 150mm square tile can be fitted on a trapped or untrapped drain
- Ideal for replacement on problem systems
- Push-fit or solvent weld spigot suitable for direct connection to 4″/110mm drainage pipework
- Valve easily removed for cleaning and maintenance work
- Mesh Hair Filter integrated
FGT150-SV-110
150mm square stainless steel tile with silicone non-return valve and removable grid including removable stainless steel mesh filter
FGT150-SV-110S
150mm square stainless steel tile with silicone non-return valve and securing screws – ABS solvent weld connection.
The only sealant Tested and Approved for use with McAlpine Plumbing Products
Channel Drains
The only sealant Tested and Approved for use with McAlpine Plumbing Products
Standard Channel Drain with Brushed Stainless Steel Cover Plate
CD600-B|
548mm
CD700-B|
648mm
CD800-B|
748mm
CD900-B|
848mm
CD1000-B|
948mm
CD1200-B|
1148mm
Standard Channel Drain with Polished Stainless Steel Cover Plate
CD600-P|
548mm
CD700-P|
648mm
CD800-P|
748mm
CD900-P|
848mm
CD1000-P|
948mm
CD1200-P|
1148mm
Standard Channel Drain with Brushed Grid Finish Stainless Steel Cover Plate
CD600-SQ|
548mm
CD700-SQ|
648mm
CD800-SQ|
748mm
CD1000-SQ|
948mm
CD1200-SQ|
1148mm
Scan here to view our Installation video or visit our website
Slimline Channel Drains
Slimline Channel Drain with Brushed Stainless Steel Cover Plate
CD600-O-B|
548mm
CD700-O-B|
648mm
CD800-O-B|
748mm
CD900-O-B|
848mm
CD1000-O-B|
948mm
CD1200-O-B|
1148mm
Slimline Channel Drain with Polished Stainless Steel Cover Plate
CD600-O-P|
548mm
CD700-O-P|
648mm
CD800-O-P|
748mm
CD900-O-P|
848mm
CD1000-O-P|
948mm
CD1200-O-P|
1148mm
Channel Drain Overview
The McAlpine range of quality channel drains is available in six cover lengths – from 548mm to 1148mm.
All can be reversed to fit tiles up to 8mm thick to match the surrounding floor.
Tile Drain for Wet Floor Areas
- Tiles suitable for 50mm water seal traps as illustrated
- Tiles supplied with brushed or polished finish. All in grade 304 stainless steel
- Tiles reversible to accommodate tiles up to 8mm
- Tile frame dimension 150mm square
- Frame height adjustable to suit tiles up to 16mm
- Supplied with adjustable height support legs for concrete floor installations
ST90-70B & TILE-PLAIN-B
Exploded view
Code:|
TILE-PLAIN-B
Code:|
TILE-PLAIN-P
| Trap Body with 11/2″ Multifit outlet. Adjustable height 105-168mm. Flow
rate 34 l/min
---|---
Code:|
ST90-70B
| Trap Body 2″ Vertical compression outlet. Adjustable height Flow rate
50 l/min
Code:|
ST90-VB
| Trap Body with 2″ Multifit outlet. Adjustable height 120-168mm. Flow
rate 50 l/min
Code:|
ST90-HPB
Documents / Resources
|
McAlpine Plumbing TSG50 Sheet Floor Gully Conversion
Kit
[pdf] Installation Guide
TSG50 Sheet Floor Gully Conversion Kit, TSG50, Sheet Floor Gully Conversion
Kit, Floor Gully Conversion Kit, Gully Conversion Kit, Conversion Kit, Kit
---|---
References
- McAlpine Kneepads | Pain Relief for Knees That Work
- McAlpine | Over 100 years of providing better solutions for the trade
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>