Rheem RH95 Professional Classic Electric Water Heaters Owner’s Manual
- June 14, 2024
- Rheem
Table of Contents
Rheem RH95 Professional Classic Electric Water Heaters
Resistored heating elements and premium grade anode rod
Efficiency
- .92 – .94 UEF
- Isolated tank design reduces conductive heat loss
- Resistored stainless steel upper and lower heating elements to prolong anode rod and tank life
Performance
• FHR: 48 – 59 gallons, based on gallon capacity
• Recovery: Up to 28 GPH at a 90° F rise, depending on model†
Longer Life
Premium grade anode rod provides long-lasting tank protection
Features
- Electric junction box located above heating elements for easy installation
- Over-temperature protector cuts off power in excess temperature situations
- Automatic thermostat keeps water at desired temperature
- Side water connections convenient for vertically constrained spaces
Plus…
- Rheemglas® tank lining resists corrosion and prolongs tank life
- EverKleen® device reduces sediment improving efficiency and tank life
- Enhanced-flow brass drain valve
- Temperature and pressure relief valve included
- Models are compliant to HUD Standards for manufactured housing and modular construction
- Low lead compliant
Warranty
6-Year limited tank and parts warranty*
See Residential Warranty Certificate for complete information
Units meet or exceed ANSI requirements and have been tested according to the AHRI Operations Manual and D.O.E. procedures. Units meet or exceed the energy efficiency requirements of NAECA, ASHRAE standard 90, ICC Code and all state energy efficiency performance criteria.
Specifications
DESCRIPTION| FEATURES| ROUGHING IN DIMENSIONS
(SHOWN IN INCHES)| ENERGY INFO.
---|---|---|---
T Y P E| NOMINAL GALLON CAPACITY| RATED
GALLON CAPACITY| MODEL NUMBER| WATTAGE| FIRST HOUR
RATING (GALLONS)| ****
RECOVERY IN G.P.H. 90° F RISE
| ****
TANK HEIGHT A
| ****
HEIGHT TO INLET
B
| ****
HEIGHT TO OUTLET
C
| HEIGHT TO RELIEF VALVE
D
| DIAMETER| APPROX. SHIP WT. (LBS.)| UNIFORM
ENERGY FACTOR (UEF)
Short| 28| 26| PROE28 S2 RH93 SB| 4500| 48| 21| 30| 7-1/8| 22-3/8| 22-3/8|
19-3/4| 97| 0.92
Short| 28| 26| PROE28 S2 RH93 SB-HO| 5500| 53| 25| 30| 7-1/8| 22-3/8| 22-3/8|
19-3/4| 97| 0.94
Short| 38| 35| PROE38 S2 RH93 SB| 4500| 55| 28| 31-1/2| 6-7/8| 23-1/4| 24-3/8|
23| 128| 0.93
Short| 38| 35| PROE38 S2 RH93 SB| 5500| 56| 28| 31-1/2| 6-7/8| 23-1/4| 24-3/8|
23| 128| 0.93
Short| 38| 35| PROE38 S2 RH93 SB| 6000| 59| 28| 31-1/2| 6-7/8| 23-1/4| 24-3/8|
23| 128| 0.94
Uniform Energy Factor and rated gallon capacity based on Department of Energy
(DOE) requirements.
Insulation blanket required to meet UEF Value. Water heater dimensions prior
to installing insulation blanket that is included with water heater. The
blanket adds 2-1/2 inches to tank height and 4 inches to tank diameter.
- If heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically requested.
- All models equipped with heat traps.
Rheem Water Heating • 1115 Northmeadow Parkway, Suite 100
Roswell, Georgia 30076 • www.rheem.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>