PHILIPS BGP294 Lumi Street Gen 2 Owner’s Manual
- June 13, 2024
- Philips
Table of Contents
PHILIPS BGP294 Lumi Street Gen 2 Owner’s Manual
LumiStreet gen2 Large, LED module 24000 lm, 830 warm white, Safety class II, Distribution medium 31, Post-top for diameter 48 mm
Increasing numbers of municipalities are having to upgrade large-scale conventional street lighting installations with energy efficient LED technology. But they are having to do this with smaller and smaller budgets. That’s why the new generation of LumiStreet has been upgraded and designed to provide a solution to this challenge, it is the ideal solution for performing point-to-point replacement of conventional lighting. LumiStreet gen2 achieves this by offering high efficiency, low Total Cost of Ownership, and ease of installation and maintenance. The ease of installation and maintenance is enabled by the Philips Service tag. Moreover, the Philips SR (System Ready) socket makes it future-ready and you can pair this luminaire with lighting control and software applications such as Interact City.
Product data
General Information
Lamp family code| LED240 [LED module 24000 lm]
Light source replaceable| Yes
Number of gear units| 2 units
Driver included| Yes
Remarks| At extreme ambient temperatures the luminaire might automatically dim
down to protect components
Light source engine type| LED
Service tag| Yes
Product family code| BGP294 [LumiStreet gen2 Large]
Lighting Technology| LED
Value ladder| Specication
Serviceability class| Class A, luminaire is equipped with serviceable parts
(when applicable): LED board, driver, control units, surge protection device,
optics, front cover and mechanical parts
Light Technical
Upward light output ratio| 0
Luminous Flux| 19,780 lm
Standard tilt angle posttop| 0°
Standard tilt angle side entry| 0°
Luminous Efficacy (rated) (Nom)| 127 lm/W
Correlated Color Temperature (Nom)| 3000 K
Color rendering index (CRI)| 80
Light source color| 830 warm white
Optical cover type| Flat glass
Luminaire light beam spread| –
Optic type outdoo| Distribution medium 31
Operating and Electrical
Input Voltage| 220 to 240 V
Line Frequency| 50 to 60 Hz
Initial CLO power consumption| 172 W
Average CLO power consumption| 176 W
End CLO power consumption| 178 W
Inrush current| 53 A
Inrush time| 0.3 ms
Power Consumption| 162 W
Power Factor (Fraction)| 0.96
Connection| 2 Push-in connector 5-pole
Cable| –
Number of products on MCB of 16 A type B| 15
Temperature
Ambient temperature range| -40 to +50 °C
Controls and Dimming|
Dimmable| No
Driver/power unit/transformer| Power supply unit regulating with constant
light output
Control interface| –
Constant light output| Yes
Mechanical and Housing
Housing Material| Aluminum die cast
Reflector material| Polycarbonate
Optic material| Polymethyl methacrylate
Optical cover material| Glass
Fixation material| Aluminum
Housing Color| Gray
Mounting device| Post-top for diameter 48 mm
Optical cover shape| Flat
Optical cover finish| Clear
Overall length| 865 mm
Overall width| 340 mm
Overall height| 195 mm
Effective projected area| 0.0256 m²
Dimensions (Height x Width x Depth)| 195 x 340 x 865 mm
Approval and Application
Ingress protection code| IP66 [Dust penetration-protected, jet-proof]
Mech. impact protection code| IK08 [5 J vandal-protected]
Surge Protection (Common/Differential)| Luminaire surge protection level until
6 kV differential mode and 8 kV common mode
Sustainability rating| Lighting for circularity
Protection class IEC| Safety class II
CE mark| Yes
Warranty period| 5 years
Flammability mark| For mounting on normally flammable surfaces
ENEC mark| ENEC plus mark
EU RoHS compliant| Yes
Initial Performance (IEC Compliant)
Luminous flux tolerance| +/-7%
Initial chromaticity| (0.43, 0.40) SDCM <5
Power consumption tolerance| +/-10%
Init. Color Rendering Index Tolerance| +/-2
Over Time Performance (IEC Compliant)|
Control gear failure rate at median useful life 100000 h| 10 %
Lumen maintenance at median useful life* 100000 h| L100
Application Conditions
Performance ambient temperature Tq| 25 °C
Maximum dim level| 0% (digital)
Product Data
Order product name| BGP294 LED240-4S/830 II DM31 MSP CLO SRT
Full product name| BGP294 LED240-4S/830 II DM31 MSP CLO SRT
Full product code| 871951410172200
Order code| 910925866909
Material Nr. (12NC)| 910925866909
Net Weight (Piece)| 11.815 kg
EAN/UPC – Product/Case| 8719514101722
Numerator – Packs per outer box| 1
EAN/UPC – Case| 8719514101722
LumiStreet gen2
Dimensional drawing
Documents / Resources
|
PHILIPS BGP294 Lumi Street Gen
2
[pdf] Owner's Manual
BGP294 Lumi Street Gen 2, BGP294, Lumi Street Gen 2, Street Gen 2, Gen 2
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>