VOLLRATH R39713 Cafeteria Breath Guard Instruction Manual

VOLLRATH R39713 Cafeteria Breath Guard

Specifications

• Product Name: Cafeteria Breath Guard
• Model: One Piece & Three Piece
• Manufacturer: Vollrath Company, L.L.C.
• Item No.: 2350030-01 Rev 04/12

Product Usage Instructions

One Piece Breath Guard Installation
Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown in Figure 1. Repeat for all four uprights.

Three Piece Breath Guard Installation

1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown in Figures 1 and 2. Repeat for all four uprights.
2. Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C). Repeat on the other side.
3. Install the one-piece breath guard (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all four mounting locations.
4. Install the side breath protector (G) to the support tube (D) securing it with cap nuts (C) as shown. Repeat on the other side.
5. Install the support bar and stud assembly (H) to the side breath guards (E). Repeat for all mounting locations.
6. Install the top breath guard (I) to the support bar and stud assembly (H) securing with cap nuts (C). Repeat for all mounting locations.

Installation Instructions

• One Piece Cafeteria Breath Guard
• Three Piece Cafeteria Breath Guard

One Piece Breath Guard Installation
Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:

NOTE:
Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.

Figure 1. One Piece Breath Guard Installation

1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figure 1. Repeat for all four uprights.
2. Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
3. Install the one-piece breath guard (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all four mounting locations.
4. Install the side breath protector (G) to the support tube (D) securing it with cap nuts (C) as shown. Repeat on the other side.

NOTE:
Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.

Figure 2. Three Piece Breath Guard Installation

1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figures 1 and 2. Repeat for all four uprights.
2. Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
3. Install the side breath guards (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all mounting locations.
4. Install the side shield (G) to the support tube (D) securing it with cap nuts (C) as shown. Repeat on the other side.
5. Install the support bar and stud assembly (H) to the side breath guards (E). Repeat for all mounting locations.
6. Install the top breath guard (I) to the support bar and stud assembly (H) securing with cap nuts (C). Repeat for all mounting locations.

Item No. 2350030-01 Rev 04/12

The Vollrath Company, L.L.C.

• ADDRESS: 1236 North 18th Street Sheboygan, WI 53081-3201
• U.S.A.
• Main Tel: 800.628.0830
• Service Tel: 800.628.0832
• FAX: 800.752.5620

Vollrath of Canada, Co.
Tel: 800.695.8560
FAX: 800.752.5620
© 2010 The Vollrath Company, L.L.C.

Frequently Asked Questions

• Q: What should I do if the plastic cracks while tightening the cap nuts?
  • A: If you notice any cracking while tightening the cap nuts, stop immediately to prevent further damage. Contact Vollrath Company, L.L.C. for assistance and replacement parts.
• Q: Are there any specific maintenance requirements for the Cafeteria Breath Guard?
  • A: Regularly check the tightness of cap nuts and screws to ensure stability. Clean the breath guard regularly with mild soap and water to maintain hygiene.
• Q: Can I disassemble and reassemble the breath guard for cleaning purposes?
  • A: Yes, you can disassemble the breath guard following the installation steps in reverse order. Ensure proper care is taken during reassembly to avoid any damage.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>