zxtech QSG6 Wireless Camera User Manual

Table of Contents

Specifications:

Initial Setup:

Do not power up the camera while it is still in the package.
Locate the 12V power input, RJ45 interface, network port, and reset button on the camera.

Download the App :

Download the app from the Google Play Store for Android devices or the App Store for iOS devices.

Mobile Setup :

SD Card Setup:

Step 1: Insert the SD card into the designated slot on the camera.
Step 2: Format the SD card using the camera’s interface.
Step 3: Set up motion recording and detection alarm preferences.
Step 4: Configure the recording schedule based on your preferences.
Step 5: Access playback of recorded files on your mobile phone, organized by date.

PC & Web Access:

Download the search tool from https://domar.com/pages/cctv-tech-support for PC access.
Access the camera via a web browser on a Windows PC using the provided link.

Factory Reset:
To perform a factory reset, press and hold the reset button on the camera for 15 seconds.

Contact Support:
If you need further assistance, visit https://domar.com/support for help and support.

Frequently Asked Questions (FAQ)

Q: What should I do if I forget my camera’s password?
A: You can perform a factory reset by holding the reset button for 15 seconds to restore default settings.
Q: Can I access live footage from the camera on multiple devices simultaneously?
A: Yes, as long as each device is connected to the same account and network, you can view live footage on multiple devices simultaneously.

WIRELESS CAMERAS MANUAL
QUICK START GUIDE MADE BY DOMAR CCTV
DOMAR.COM

After the camera’s initial self checking, download CAMHIPRO App from APP STORE OR GOOGLE PLAY SHOP.

STEP 1: SEARCH FOR NEW CAMERA
- Tap the “+” Icon on the Top Right Corner.
- Select IP CAMERA > DEVICE IN USE > Search nearby devices.
- Tap on SEARCH NEARBY DEVICES to search for all available devices.
STEP 2: ADD THE NEW CAMERA
- Choose the device from the list automatically provide.
- The default username and password should be automatically enter.
- If not, the default username is admin and password is admin
- Conﬁrm to proceed.
STEP 3: CHANGE PASSWORD (COMPULSORY)
- First time you try to view the camera, it will force you to reset the password.
- Tap YES to enter the password-resetting page.
- Enter the old (default) password admin, and then enter your new password twice.
- Tap Apply to proceed.
STEP 4: CONNECT CAMERA TO WIFI
- Press WIRELESS SETTING to setup Wi-Fi.
- Select your home network after Press GET THE WIRELESS NETWORK AROUND THE DEVICE.
- Select the correct network, enter your Wi-Fi password and APPLY
STEP 5: READY FOR INSTALLATION
- Once you complete the last step, you may unplug the Ethernet cable.
- The CamHipro App will automatically connect the camera via Wi-Fi.
- Unplugging the power will not alter the camera’s settings, and it will be ready for installation.
- Only install the camera after thoroughly testing and conﬁrming satisfaction with its features, since installation signiﬁes usage and nulliﬁes the 30-day return policy.

STEP 1: SD CARD INSTALLATION
- You may not have the same camera in this manual, but the same principle applies.
- Remove the cover from the camera by unfastening the screws at the bottom. Insert the Micro SD card.
STEP 2: FORMAT THE SD CARD
- SD card must to be formatted before recording start to work.
- It is recommend to use SD card above CLASS 10
- Use CAMHIPRO > SD CARD SETTING to Format the SD card when adding for the ﬁrst time.
- You should be able to see the “FREE SIZE” of the SD card after the format. If “Free Size” equals to Zero, you will have to format it again.
STEP 3: SETTING UP MOTION RECORDING
- Set NOTIFICATION and MOTION DETECTION alarm recording on the phone.
- Turn on RECEIVE ALARM PUSH and MOTION DETECTION ALARM
- ALARM RECORDING TO SD CARD is recommended when the Micro SD card is small.
STEP 4: SETTING UP RECORDING SCHEDULE
- Go to SD CARD PLAN RECORDING
- Tap on ADVANCED SETTING
- Tap on the Quick editing and follow the steps to customise the timely recording preferences.
STEP 5: PLAYBACK RECORD ON PHONE
- Tap the SD CARD ICON on the intended camera
- Tap on any recording footage
- You can choose to PLAY or DOWNLOAD footages and images.
- You can also select TIME PLAYBACK to ﬁlter the recording ﬁle easily by date.

DOWNLOAD SEARCH TOOL FROM:
https://domar.com/pages/cctv-tech-support
- ```
* Tap REFRESH to see all the cameras online.
```
- Select a camera and double-click to run browser to access that camera.
- Select a camera and click NEXT to modify network parameters. Default user name is admin, Default password is admin

PRESS & HOLD RESET BUTTON FOR 15 SECONDS

If the reset is successful, you will hear a chime.
The camera will restore to its factory default settings.
It is recommended not to reset the cameras after installation, as reconnecting the camera to your router will require you to take the camera off the wall.

Visit https://domar.com/support for help and support.