EXOTON DA1002C Power Amplifier Bluetooth 5.0 User Manual
- June 14, 2024
- Exoton
Table of Contents
- EXOTON DA1002C Power Amplifier Bluetooth 5.0
- Product Specifications
- Product Overview & Control Functions
- Surface Instructions
- Remote control
- Package Contents
- Operation procedure
- Frequently Asked Questions
- Warranty Information
- About Exoton Audio
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
EXOTON DA1002C Power Amplifier Bluetooth 5.0
Installation video
Product Specifications
EXOTON DA1002C is a powerful Bluetooth 5.0 HiFi stereo amplifier with USB/Bluetooth/Optical /Coaxial inputs and Treble & Bass control to meet more your needs. It supports MP3/WMA/APE/FLAC/WAV music formats, suitable for most home passive speakers.Adopting classic TPA3221 chip to get clear sound without any audible noise even at high output.
Maximum output
| 100W*2（4Ω）
---|---
Speaker impedance matching| 3-8Ω
Working voltage| DC 18-30V
Input sensitivity| 0.775V
Frequency response| 20Hz-20KHz（±1dB）
THD
|
0.08%
SNR
|
≥98dB
Bare machine size
|
L133W128H36mm
The weight
|
0.51kg
Packing size
|
L300W220H70
Product Overview & Control Functions
Front Panel
Surface Instructions
-
Functional indicator light
-
USB interface (automatically switch and play when inserting usb flash drive)
-
Remote receiving window
-
Bass knob
-
Mid knob
-
Treble knob
-
Encoder knob (short press to start/short press to cut channel again/rotate to adjust volume/long press to shut down)
-
Bluetooth antenna base
-
Analog RCA input (such as CD player, DAC decoder, mobile phone,TV,etc., red to right channel, white to left channel)
-
Coaxial input
-
Optical input
-
Speaker output (red connection +/ black connection -,R for right channel / L for left channel)
-
Power interface (DC voltage shall not be higher than 30V)
Remote control
Package Contents
- EXOTON DA1002C Amplifier*1
- Remote control *1
- AC Power Cord*1
- 24V/4A Power Supply *1
- Bluetooth antenna*1
- User Manual *1
Operation procedure
- Connect the required audio source to the corresponding input interface (when connecting Bluetooth, you need to switch the input channel to Bluetooth).
- Connect the passive speaker to the speaker interface (red +/ black -, R to the right speaker /L to the left speaker).
- Connect the DC power supply (the DC voltage must not be higher than 30V).
- Press the encoder knob to turn on the power supply and switch to the required input channel.
- Turn the knob clockwise to select the desired volume and high or low volume.
Frequently Asked Questions
Why does the volume stay the same, but the volume is different when connected to different sources (such as a CD and then a mobile phone) ?
The amplitude of the electrical signal varies from device to device. For example, a mobile phone is usually 0.35V and a CD is 1V.Natural sound levels are different.
Why is there a lot of electrical noise from the horn?
If you are not using the original standard power supply, please replace the power supply and test again.Many power sources in the market have a large disturbance coefficient of the text wave, which will ca use a large current sound.
Why does the speaker make a loud buzzing sound when I plug in the input cord and don't play the audio source?
Used the signal line that does not take shield empty load, can have interference signal to enter amplifier t o carry on amplification, if you hate this sound to suggest you replace the signal line that takes shield, perhaps unplug signal line.
Does this machine handle phonographs/record players?
At present, this model does not support phonograph/phonograph signal input, because the electric signal output value of phonograph/phonograph is very small, need to add a phonograph amplifier.
Why can't I search for Bluetooth?
Due to the design of the machine, when switching to other channels, the Bluetooth does not work, you have to switch to the Bluetooth channel to search.
I have all the wires connected, but no sound output ?
Check whether the POWER indicator is on or not. If it is not on, turn on the key to start the machine. After pressing the power button, the indicator will still not go on. At this point, you can find one with t he same voltage output power supply to test again. If the indicator light is on, check whether the VOL knob is in the minimum state; if it is in the mi nimum state, it will be normal if it is rotated clockwise If the above two points are normal, check whether the playback device of input audio source is paused, mute or at the minimum volume.
Warning:
- Do not open the shell without permission. Improper operation may cause electric shock.
- Please use the regular manufacturer’s switching power supply, otherwise the risk of damage to the machine.
- Do not place the machine in a high-temperature and humidity environment.
Warranty Information
All Exoton Audio products have an 12-month limited warranty on parts and labor from the date of purchase. Please contact us if you have any problems.
About Exoton Audio
Exoton Audio designs and builds innovative audio products with all your music in mind. Great sound, simple but elegant designs, high-quality materials, and truly useful features are what Exoton Audio is about. We sincerely hope you get as much enjoyment from our products as we’ve had to create them!
- Our website: www.exotonaudio.com
- Our Youtube channel: EXOTON AUDIO
- Our Facebook page: EXOTON
After-sale Service and Technical Support Email:
support@exotonaudio.com.cn
FOR MORE INFORMATION, PLEASE FOLLOW EXOTON’S SOCIAL MEDIA PLATFORM.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>