eMOTAL U8 True Wireless Earbuds User Manual
- June 3, 2024
- eMOTAL
Table of Contents
True wireless earbuds
U8
Product Structure
- Volume Up+
- Volume Down-
- Mute/Unmute Button
- LED Light Indicator
- TYPE-C Charging Port
- MFB Button
- Noise Canceling Mic
- Call Mic
Specification
Bluetooth version: V5.0
Charging time: 1.5H
Charging port: Type-C
Transmission distance: 50feet
Battery capacity:150mAh
The Way to Switch Left/ Right Ear
※ Please follow the instructions for the better use.
Button Instructions
※ Remark: The indicator light will be red when charging, when it is fully charged, the light will be blue.
How to Pair
Long press the MFB for 3 seconds to turn on the headset, then turn on the
Bluetooth of the phone, search the device named ” EM-U8″ to connect.
※ Remark: the headset will turn off automatically when there is no connection
within 5 minutes.
※ Reset: In standby mode, press and hold the volume- button and the mute
button for 5 seconds at the same time to complete the reset.
※Redial: In standby mode, press twice for redialing the last caller.
How to Connect with 2 Devices
- Connect the first device, then disconnect it.
- Connect the second device and reconnect the first device
- If you cannot connect, please try to repair and connect the devices again. Note: please disconnect the first device or the Bluetooth name will not be found.
The Problems You May Have
※ Disconnection: Please check if the distance between the mobile phone and the
headset exceeds 15m.
No sound: Please check if the headset or phone is at the low volume, make sure
the headset connects with the phone correctly. Low battery: when it is at low
battery, the indicator light will flash. Please use the standard types to
charge when battery low.
※ Cannot pair: Please check whether the Bluetooth device is turned on and
search for the headset device name.
Attention
- Do not let children play headset. Small parts may cause suffocate.
- Do not disassemble the headset, which will be regarded as man-made damage, which is not included in the warranty.
- Do not use the headset under a humidity environment or in the pouring rain.
Customer Support
If you have any issues please contact us via support email as soon as
possible, emotalvip@outlook.com
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CE-RED
Hereby,Shenzhen Xinzhengyu Technology Co., LTD declares that this wireless
headset, U8 is in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2)
and Article 10(10), this product allowed to be used in all EU member states.
Use the wireless headset in the environment with the temperature between -10 C
and 50 C , Use careful with the headset e maybe possible excessive sound
pressure
from headset and headset can cause hearing loss.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions. The product shall
only be connected to a USB interface of version USB2.0
SAR: The device complies with RF specifications when the device used at 5mm
from your body.
Manufacturer: Shenzhen Xinzhengyu Technology Co., LTD Address: 9th Floor,
Building 3, Haitian Lanyu Industrial Park, Shilong Community, Shiyan Street,
Bao ‘an District, Shenzhen City, Guangdong Province
E-mail: emotalvip@outlook.com