Emotal EM-SP1AI Noise Cancelling Bluetooth Headset User Guide
- June 4, 2024
- eMOTAL
Table of Contents
Emotal EM-SP1AI Noise Cancelling Bluetooth Headset
Introduction
The 300mAh battery of the Bluetooth headset was built-in. it offers 800 song playback; 30 hours of talk time; 240 hours of standby. The EM-SP1 can be fully charged in 1.5 hours and has a continuous talk time of 30 hours. For charging, a USB-C cable is included. You may use the Bluetooth headset to accept and reject calls thanks to the built-in DUAL microphones. In addition, voice assistant is supported by Bluetooth headset for smartphones. The wireless headset uses a cutting-edge technology to deliver more crystal-clear sound and a reliable connection. When you fully depress the “M” mute button, the caller will be unable to hear you. Press MFB three times when in standby mode to launch Siri. The rotating ear hook and mic arm are made to fit comfortably in either ear. With only 0.59 oz., it is extremely light and cozy enough to wear for extended periods of time.
The eartip can be rotated 360 degrees for the ideal position for listening. Small ears should not use the headset since multiple devices can be connected at once. Most iOS and Android smartphones, tablets, laptops, and other Bluetooth devices can be instantly and reliably linked with Bluetooth V5.2 technology at a distance of up to 49 feet.
PRODUCT STRUCTURE
SPECIFICATION
- BLUETOOTH VERSION: V5.2
- TRANSMISSION DISTANCE: 15M
- BATTERY CAPACITY: 300mAh
- TALK TIME: 24H
- PLAYBACK TIME: 30H
- CHARGING PORT: Type-C
- CHARGING TIME: 1.5H
- MATERIAL LIST: TPU, PC+ABS
- WATER-RESISTANT LEVEL: IPX6
THE WAY TO SWITCH LEFT / RIGHT EAR
- If you feel the headset is not fit, please adjust the eartip to a comfortable position
- Please follow the instructions for the better use.
BUTTON INSTRUCTIONS
HOW TO PAIR
- Long press the MFB for 3 seconds to turn on the headset, and then turn on the Bluetooth of the phone, search the device named “SP1” and connect.
- REMARK: the headset will turn off automatically when there is no connection within 3 minutes.
HOW TO CONNECT WITH 2 DEVICES
- Connect the first device, then disconnect it.
- Connect the second device and reconnect the first device
- If you cannot connect, please try to repair and connect the devices again.
- NOTE: please disconnect the first device or the headset Bluetooth name will be not found.
THE PROBLEMS YOU MAY HAVE
- DISCONNECTION: Please check if the distance between the mobile phone and the headset exceeds 15m.
- NO SOUND: Please check if the headset is at the low volume or the headset connects with the phone correctly.
- LOW BATTERY: when it is at low battery, the indicator light will flash. Please use the standard type-c to charge when the battery low.
- CANNOT PAIR: Please check whether the Bluetooth device is turned on and search for the headset device name.
ATTENTION
- Do not let children play headset. Small parts may cause suffocate.
- Do not disassemble the headset, which will be regarded as man-made damage, which is not included in the warranty.
- Do not use the headset under a humidity environment or in the pouring rain.
- Do not clean the headset when it is charging. Separate the headset from the charging cable before cleaning.
CUSTOMER SUPPORT
If you have any issues please contact us via support email as soon as possible, emotalvip@outlook.com
Frequently Asked Questions
Can you use noise-canceling headphones to converse on the phone?
A top-notch noise-canceling headset will work with Bluetooth gadgets, desk phones, VoIP computer softphones, mobile apps, and mobile phones. In summary, if a headset’s description refers to noise cancellation, it only refers to the quality of your microphone and the caller’s ability to hear you.
How do the microphones in Bluetooth headphone work?
When coupled with Bluetooth-enabled digital audio equipment, Bluetooth headphones can wirelessly receive digital audio over the Bluetooth protocol. Through BT wireless transmission, BT headphones absorb digital audio, convert it to analogue audio, amplify it, and then transform it into sound like ordinary headphones.
Do headphones work to reduce background noise?
By adjusting what the caller hears, the electronics in the headset circuitry will make your speech audible and clear while cutting down on background noise by up to 75%.
Can Bluetooth headphones communicate with one another?
It’s actually quite easy. Simply set your Bluetooth multipoint headphones into pairing mode, connect your first device, and confirm that Bluetooth is enabled on both the devices you want to link with them. Reset the headphones to pairing mode, and then join your second gadget.
Do noise-canceling headphones shield your ears?
None. They are not intended to defend against noise. Modern noise-cancelling earbuds and headphones use soundproofing for higher frequency sounds and active noise control for low frequency sounds to block out undesired background noise.
What advantages do noise-canceling headphones offer?
Allows users to sleep more comfortably during flights, which can lessen ear fatigue brought on by prolonged exposure to noise on trains, planes, and other forms of transportation. May aid in easing the stress brought on by sensory overload.
Why does Bluetooth exchange data?
According to the Bluetooth Special Interest Group (SIG), low-power radio waves in the range of 2.400 GHz and 2.483 GHz are used for Bluetooth device communication. This is one of a select few bands designated by an international treaty for the use of commercial, scientific, and medical equipment (ISM).
What are the uses of Bluetooth headphones?
Stereo headphones can be connected to a user’s computer, stereo, music player, or cellphone. Although Bluetooth headphones can have a microphone and work as a headset for smartphones, their main use is for listening to music.
Can noise cancellation harm your hearing?
Overall, using headphones with noise cancellation has no detrimental effects on your hearing. When the ANC is turned on, you might hear a very faint hissing sound, but that’s about it. However, this may irritate some people and perhaps make them feel queasy.
What distinguishes noise reduction from noise cancellation?
As you insert the points farther into the ear canal, they improve the seal. Mid- to high-frequency noises can be reduced by passive noise cancellation by 15 dB to 30 db. Conversely, noise-canceling headphones use circuitry that emit sound waves in order to cancel out any outside noise.
Dual Bluetooth connectivity: What is it?
Android users must go to Bluetooth Settings and pair each Bluetooth speaker or set of headphones individually. After connecting, click on Advanced Settings by tapping the three-dot icon on the right. If the “dual audio” option is not already selected, switch it on. Users should be able to connect to two devices at once thanks to this.
Can Bluetooth connect to a large number of devices?
Most Android handsets support up to five Bluetooth devices at once, while some can connect to as many as seven. The amount of connections that can be supported depends on the Bluetooth module that your device has.
Dual pairing – what is it?
Dual pairing simply refers to the ability to simultaneously connect to two different Bluetooth speakers and stream your favorite music at a much louder volume. You must activate Bluetooth on each of the three devices in order to connect the speakers, as follows: The phone. Initial Speaker
Does noise cancellation use battery power?
Your active noise-canceling headphones often consume 20–30% more power in noisy settings. This is due to the fact that active noise-canceling headphones are designed to block out certain sounds, like the hum of an aeroplane engine, which uses more battery power.
Can noise cancelling give you a headache?
Active noise cancellation headphones can cause your eardrum to become compressed by repeated sound waves, giving you a headache or possibly making you feel nauseous or confused. Your ears are under strain, which is not particularly comfortable.
Video
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>