CISCO TTC60-35 Webex Board Installation Guide

: June 11, 2024
: Cisco

Table of Contents

TTC60-35 Webex Board
Floor Stand
Screen
How the top of the picture aligns with the wall mount bracket
Connector panel
Documents / Resources

Product TTC60-35 / Product TTC60-36
Installation Guide

TTC60-35 Webex Board

Wall Mount

Othre tools you may need

Floor Stand

Screen

The product must be installed by qualified personnel, according to the provided installation instructions.
We recommend 3 people (Product TTC60-36) / 2 people
(Product TTC60-35) working together to mount this product. Follow current regulations.

Wall-secured and wall-mounted products
Due to the size and mass of the product, it is important that wall-secured and wall-mounted parts are securely fixed to the wall by qualified personnel. Follow current building regulations.
Due to the variety of wall constructions, the installer must determine the number and type of screws required for a safe installation. The installer has to bring the parts that are required to fix the product securely to the wall.
Choose one of the tracks and proceed to the indicated page. The wall mount bracket must be securely fixed to the wall by qualified personnel to prevent serious hazard due to the screen falling forward. Choose the horizontal slots that suit your wall.
The product with wall mount bracket weighs 78 kg / 172 lb (Product TTC60-36); 45 kg / 99 lb (Product TTC60-35). Adjust the rubber spacers so that the screen rests against the wall on both sides. Follow the instructions on the user interface. Only for floor stands with wheels Only for floor stands with wheels Only for floor stands with wheels Only for floor stands with wheels Slide the hooks to the most convenient position. The cable clips are attached with magnets. Follow the instructions on the user interface.

How the top of the picture aligns with the wall mount bracket

How to change the pen tip

Connector panel

A. Ethernet (RJ-45) 100/1000 Mbps PoE port: For example for Cisco Room Navigator (touch interface)
B. Ethernet (RJ-45) 100/1000 Mbps: For example for Cisco PTZ 4K camera control
C. External network: Ethernet (RJ-45) 100/1000 Mbps
D. HDMI input: HDMI 2.0 type A, supports formats up to 3840 × 2160p30 (4kp30) and ARC, compatible with HDCP
E. USB-C: DisplayPort Alternate Mode up to 3840 × 2160p60 (4kp60)
F. 2 × HDMI outputs: HDMI 2.0 type A, up to 3840 × 2160p60 (4kp60) for screen mirroring, content and live video display
G. Maintenance (micro USB)
H. USB-A
I. Analog microphone inputs: 3.5 mm minijack
J. Analog audio line output; stereo 3.5 mm minijack
K. Factory reset
L. Status LED
M. Power

Power and network connectivity

100-240 VAC, 4.0-2.0 A (Product TTC60-36), 3.0-1.5 A (Product TTC60-35), 50/60 Hz
Always use the provided power cable.
Keep the power plug and outlet easily accessible in case you need to disconnect the device from power.
This device is designed for connection to TN and IT power systems.
Use either Ethernet LAN, as shown in the illustrations, or Wi-Fi.

Visit these websites to learn more about your device.

| help.webex.com
---|---
| cisco.com/go/board-docs
| projectworkplace.cisco.com
| cs.co/mtrdevice-docs
| cs.co/webexadoption

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)

Cisco Systems Inc.
Corporate Headquarters
170 West Tasman Dr.
San Jose, CA 95134
USA
https://www.cisco.com/go/offices
D15xxx.01
© 2023 Cisco Systems, Inc.
All rights reserved.

Documents / Resources

| CISCO TTC60-35 Webex Board [pdf] Installation Guide
TTC60-35, TTC60-35 Webex Board, Webex Board, Board
---|---
| CISCO TTC60-35 Webex Board [pdf] User Guide
TTC60-35, TTC60-35 Webex Board, Webex Board, Board