ECOFLOW RIVER PRO Whole Home Backup Kit User Guide
- June 1, 2024
- ECOFLOW
Table of Contents
ECOFLOW RIVER PRO Whole Home Backup Kit
POWER HAS NEVER BEEN THIS EASY
The Transfer Switch installation must be performed by a qualified electrician
under the guidance of the installation and operating instructions in
compliance with all applicable electrical codes. Only viable with indoor
circuit breaker panels.
For questions regarding installation or the Transfer Switch, contact us for
order Support and Product Inquiries Monday to Friday, 8:30- 17:00 GMT+2 at
27-80-088-0002 (toll-free).
THE WHOLE-HOME BACKUP KIT INCLUDES
RIVER PRO BUNDLE
- RIVER PRO
- Transfer Switch 600W|720Wh|240V
DELTA PRO BUNDLE
- DELTA PRO
- Transfer Switch 3600W|3.6-10.8kWh|240V
DELTA 2 BUNDLE
- DELTA 2
- Transfer Switch 1800W|1-3kWh|240V
DELTA MAX BUNDLE
- DELTA MAX
- Transfer Switch 2000W|2.016kWh|220-240V
TIPS ON SELECTING CIRCUITS
With the help of a qualified electrician, integrate the Portable Power Station
into your home circuits via the Transfer Switch by selecting essencial
circuits from your breaker panel such as refrigerators, light switches, garage
door, and outlets in main living areas, etc.
A PLUG-AND-PLAY EASY SETUP
Once you have installed the Transfer Switch, simply plug the Portable Power Station into the power inlet of the Transfer Switch.
Step 1
Insert the AC Plug Cable provided by the electrician into the DELTA Pro’s AC
outlet
Step 2
Your Whole-Home Backup Kit is all set now
*Note: The images shown are for illustration purposes only and may not reflect the actual product.
HOW TO SAFELY USE THE WHOLE-HOME BACKUP KIT DURING A POWER OUTAGE?
Keep your critical home circuits running with a flip of the switch when a
blackout hits. Forget expensive and complicated
Once you have installed the Transfer Switch, simply plug the Portable Power
Station into the power inlet of the Transfer Switch. systems. Best of all,
there are no fumes, noise, or messy gasoline to hassle with.
AUTO MODE: In AUTO MODE, the transfer switch will automatically switch to
the backup power source when load shedding occurs. Make sure you do not exceed
the maximum operating power of the Portable Power Station.
MANUAL MODE: In MANUAL MODE, after load shedding begins, switch manually
to the backup power source through the full disconnect “off” position. Make
sure you do not exceed the maximum operating power of the Portable Power
Station. Manual mode is recommended for nobody at home or when you are
sleeping at night.
*Note: The images shown are for illustration purposes only and may not reflect the actual product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>