LEDWOOD VISTA1080 1080P Full HD Camera User Guide

June 12, 2024
LEDWOOD

LEDWOOD VISTA1080 1080P Full HD Camera

LEDWOOD VISTA1080 1080P Full HD Camera

Feature

Feature

Symbol SAFETY INSTRUCTIONS

Please read this manual carefully, as it contains important intonations on installation and operation.

  • Keep the manual for future reference. If the unit ever changes ownership, please make sure that the new user is in possession of the manual.

  • Ensure that the mains voltage is suitable for this device, and does not exceed the supply voltage indicated on the nameplate.

  • To avoid risk of fire or electric shock, do not expose this unit to rain or moisture. Make sure that no flammable objects are in the vicinity of the unit during operation.

  • Do not expose the unit to dripping or splashing water.

  • Do not place naked flames, such as lighted candles, on the unit.

  • To ensure adequate ventilation, install the unit in a well-ventilated location at a minimum distance around the unit of of 50 cm. Ventilation must not be impeded by obstructing ventilation openings with objects such as newspapers, tablecloths, curtains, etc.

  • Unplug the unit from the mains before carrying out any maintenance or servicing.

  • The unit is intended for use in temperate climates. The ambient temperature must not exceed 40°C.
    Do not operate the unit at higher temperatures.

  • In the event of a malfunction, switch off the unit immediately. Never attempt to repair the unit yourself.
    Incorrect repairs may result in damage or malfunction. Contact an authorized service center.

  • Ensure that the power cord is never crushed or damaged.

  • Never unplug the unit by pulling on the cord.

  • Do not expose your eyes to the light source for too long.- Batteries must be inserted with the correct pclarity.

  • Batteries must be disposed of safely. Dispose of them in the appropriate collection bins (ask your dealer).
    your dealer) to protect the environment.

  • Do not charge the product when it is wet.

WARNING

  • Danger of explosion if battery is incorrectly replaced. Replace only with same or equivalent type.
    Batteries must not be exposed to excessive heat such as sunshine, fire or similar sources.

you wish to return your LEDWOOD product, please contact the seller from whom you purchased it.
Our products are covered by the European legal conformity guarantee for 2 years.

Safety extra-low voltage (SEL V) or protective low voltage (PL V) power supply, ungrounded masses, safe power supply ( safety transformer).

Content of box

  • 1 camera

  • 1 USB cable

  • 1 waterproof case

  • 1 bike bracket

  • 1 helmet mount

  • 3mounts

  • 1 dip

  • 1 adhesive

  • 1 bandage

    • WATERPROOF CASE

    • CLIP

    • SUPPORT
      Support

    • MOUNTS
      Mounts

    • HELMET MOUNT

TECHNICAL SPECIFICATIONS

LCD 2LTPS
Lens Objectif grand angle HD 120° A+
Image resolution (Valeur par defaut 12M)12M/8M/5M/2M
Video resolution (Valeur par defaut)1080P 30 FPA

720P 30FPS

VGA 30FPS

Video format| AVI
Storage| Micro SD
Optical source frequency| 50Hz/60Hz
USB interface| USB2.0
Power interface| 5V1A
Compressed video format| M-JPEG
Battery capacity| 900mAh

Do not dispose of appliances bearing this symbol in household waste. Help protect the environment and your own safety by recycling your electrical and electronic products. The device and its packaging must be taken to your local collection pcint for recycling. Contact your local authorities for information on disposal and recycling. Some collection centers accept products free of charge.

Symbol Recycling: Our packaging may be subject to sorting instructions. To find out more, go to www.consigneetri.fr I ENVIRONMENTAL PROTECTION- DIRECTIVE 201211S’l.lE

CHARGING
RECHARGEMENT
Charging Rechargement

| CAUTION: if the product is to be left unused for a long period, leave the battery fully charged, otherwise the battery may be damaged!
Recharge the product at least every 2 months. Do not expose your device to extreme1emperatures (above 50°C) (e.g. direct sunlight in a closed vehicle, near a heat source or radiator, etc.). High temperatures can damage speaker performance and shorten battery life.
---|---

CHARGING INSTRUCTIONS

Before using the product, you must insert the battery currach into the camera as indicated by the symbols +/- symbols, then fully charge the battery.

  1. Connect the USB power cable to the DC IN 5V socket (8), then to the USB or mains socket via an adapter.
  2. When the battery is fully charged, the LED indicator (11) goes out, so disconnect the cable.
  3. Insert a memory card (32GB max) in slot (6).
  4. Press and hold «ON/OFF» button (1).
  5. On/Off I Mode
  6. Shutter/ OK
  7. UP key (Previous button)
  8. Down key (Next button)
  9. Speaker
  10. Memory card slot
  11. Microphone
  12. USB charging input
  13. LCD display
  14. Battery slot
  15. LED indicator
    Charging Instructions

MEMORY CARD

  1. Before inserting a micro SD card into the slot (6), be sure to format the card.

CHANGING VIDEO/PHOTO MODE

  1. Switch on the camera by pressing and holding the «NO/OFF» button (1).
  2. A «CAMERA» logo will appear at the top of the screen.
    To change modes, simply press the mode button (1) to switch from one mode to another (CAMERA/ PHOTO/ PLAY PHOTO or VIDEO).
    Click on the buttons (3) and (4) on the side of the camera to navigate through the various tabs or view the different photos or videos, then click on the «OK» button (2) to view your video or other.

VIDEO MODE

  1. Switch on the camera by pressing and holding the «ON/OFF» button (1).
  2. A «CAMERA» logo will appear at the top of the screen.
    To start a video, simply press the shutter button (2) once, a beep will sound and video recording will begin.
    To stop recording, press the shutter button (2) a second time.

MODE PHOTO

  1. Switch on the camera by pressing and holding the «ON/OFF» button (1).
  2. Switch to photo mode by pressing the mode button (1), a « PHOTO CAMERA» logo will appear at the top of the screen. To take a photo, simply press the shutter release button (2) once, a beep will sound and the shot will be recorded on the memory card.

CAMERA SETTINGS

  1. Switch on the camera by pressing and holding the «ON/OFF» button (1).
  2. Press and hold the «OK» button (2) to enter the parameters.
  3. Press buttons (3) and (4) on the side of the camera to navigate through the various menus.
  4. Press button (2) to confirm your selection.

MOUNTING CAMERA AND ACCESSORIES

Mounting Camera And Accessories

FUNCTION PRESS THE KEY BUTTON
On/Off 1
Video/ photo mode 1
Trigger I Settings 2
Next button 3
Previous button 4
LEGEND

Symbol Appui long
Appui Court

CUSTOMER SUPPORT

direclion@churchill.world
www.leclwood-audio.com
Download the instructions in. pdf format contact us via mail below:
contact@sav08.fr
Symbol SymbolsSignatureLogo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals