VOXICON VXD-P49SUW 49 Inch Ultrawide Curved Monitor User Manual
- June 11, 2024
- VOXICON
Table of Contents
VOXICON VXD-P49SUW 49 Inch Ultrawide Curved Monitor
Specifications :
- Resolution: 5120×1440@90Hz
- Input Sources: DisplayPort (DP), HDMI, USB-C
- Connectivity: HDMI, DP, USB-C, USB-B, USB-A, Audio Out, DC 24V
Product Usage Instructions
Connecting the Monitor
- Connect the monitor to your computer using the appropriate cable (HDMI, DP, USB-C).
- Ensure the power cable is connected to the DC 24V port for power.
- For audio output, connect headphones or external speakers to the Audio Out port.
Accessing the Menu:
To access the menu, press the Monitor Button on the control panel. Use the UP
and DOWN buttons to navigate through the menu options.
Adjusting Display Settings
- Brightness & Contrast: Adjust brightness and contrast levels from 0 to 100.
- Picture Mode & Color Settings: Modify picture mode, color temperature, hue, saturation, and other color settings as needed.
- Sharpness & Response Time: Customize display sharpness and response time settings.
SAFETY INFORMATION
-
Read these instructions – All the safety and operating instructions should be read before this product is operated.
-
Keep these instructions – The safety and operating instructions should be retained for future reference.
-
Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
-
Follow all instructions – All operating and usage instructions should be followed.
-
Do not use this equipment near water, or in humid environments – The appliance should not be used near water or moisture e.g. in a wet basement or near a swimming pool.
-
Clean only with a dry cloth. Do not use solvents or petroleum-based fluids.
-
Do not block any ventilation openings.
-
Do not install near any heat sources such as radiators, stoves or other apparatus (including amplifiers) that produce heat.
-
Do not tamper with the supplied plug. This plug is a B51363 standard plug.
-
Protect the power cord from being walked on or trapped, particularly at the plug and at the point where it exits from the appliance.
-
Only use attachments/accessories specified by the manufacturer.
-
Use only with a cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart or stand is used, use caution when moving it to avoid any injuries or damage from it tipping over.
Unplug the apparatus during lightning storms or when unused for long periods of time. -
Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as if the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus or it has been exposed to rain or moisture, it does not operate normally or has been dropped.
-
Please keep the unit in a well-ventilated environment.
-
The monitor should only be connected to a mains power supply as rated on the back of the equipment.
-
To prevent overload, do not share the same power supply socket with too many other electronic components.
-
Do not place any connecting wires where they may be stepped on or tripped over.
-
Do not place heavy items on the cable as may cause damage.
-
When removing from a socket hold by the plug and not the wires.
-
Disconnect the power immediately and seek professional help if the plug or cable is damaged, liquid has spilled onto the set, if accidentally exposed to water or moisture, if anything accidentally penetrates the ventilation slots or if the set does not work normally.
-
Do not remove the safety covers. There are no user-serviceable parts inside.
-
Trying to service the unit yourself is dangerous and may invalidate the product’s warranty.
-
Only qualified personnel should service this apparatus.
-
Do not block ventilation slots on the back cover. The monitor can be placed in a cabinet but ensure at least 5cm (2″) clearance all around. Do not tap or shake the screen, this may damage internal components.
-
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
The apparatus shall not be exposed to dripping or splashing and objects filled with liquids, such as vases, shall not be placed on the apparatus. -
WARNING: The wall plug socket is used as a disconnection device and should remain readily accessible.
WARNING: The batteries shall not be exposed to excessive heat such as direct sunlight or fire.
AT FULL VOLUME, PROLONGED LISTENING MAY DAMAGE THE USER’S HEARING.
WHAT’S INCLUDED
CONNECTIONS AVAILABLE ON THE MONITOR
- HDMI (Used to connect a compatible device. Supports HDMI 2.0, 3840×2160@60Hz.
- DP (Used to connect a compatible device. Supports Display Port 1.4, 5120×2160@75Hz.
- USB-C (Supports data transmission external charging and image display, 5120×2160@60Hz, PD90W.
- USB-B (Used for connecting compatible USB-B devices)
- USB-A (Used for connecting compatible USB-A devces)
- USB-A (Used for connecting compatible USB-A devces)
- Audio out port (Used for connecting headphones or external speakers)
- DC24V (Power.)
Control Panel
The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
INITIAL SETUP
Connect the monitor to a power outlet.
- Press the POWER button on the monitor or to turn it on (The indicator will be blue).
- Connect the relevant cable to the corresponding input on the monitor. The source will be automatically detected.
- To change between inputs, press the “Source” button to enter the “.6. buttons to choose the input source between Type-C, DP, HDMI.
OSD MENU
input Source
Switch the signal input to DisplayPort, HDMI ,Type-C.
Brightness/Contrast
- Brightness: Change the brightness value from 0 to 100.
- Contrast: Change the contrast ratio from 0 to 100.
- DCR: Turn the Dynamic Contrast Ratio by on or off.
Color Setting
- Gamma: Change the gamma value to 2.0/2.2/2.4. Picture
- Mode: Change the picture mode to:Standand photo movie Game FPS RTS. Color
- Temperature: Change the color temperature to Normal/warm/cool/user.
- Hue: Change the display Hue value from 0 to 100.
- Saturation: Change the color saturation value from 0 to 100. Low biue
- light: Change the LBL value from 0 to 100.
Picture Quality Setting
- Sharpness: Change the display Sharpness value from 0 to 100.
- Reponse Time: Select the Reponse Time Value from Low,Middle,High or turn it Off.
- Noise Reduction: Select the Noise Reduction Value from Low,Middle,High or turn it Off.
- Super Resolution: Select the Super Resolution Value from Low,Middle,High or turn it Off.
- Dynamic Luminance Control: Turn the Dynamic Luminance Control feature On or Off.
Display
Aspect Ratio: Change the image aspect ratio to Wide Screen,4:3,21:9,Auto.
Audio
- Mute: Turn on or off to mute the Audio source.
- Volume: Change the Audio source value from 0 to 100. Audio
- Source: change the Audio Source to; HDMI. Type-C. DP
Multi-window
- Multi-Window: Change the Multi-Window to:Off, PIP mode, PBP zwin.
- Sub Win2 Input: You can enter this function.
- PIP Size: Change the PIP Size to: Small, Medium, or Large.
- PIP Position: Change the PIP Position to: TopRight, TopLeft, BottomRight, BottomLeft.
OSD
- Language: Adjust the language to Chinese, English, Korean, Russian, Spanish, Japanese, French. H-
- position: change the horizontal position from 0 to 100.
- V-position: Change the vertical positon from 0 to 100.
- Transparency: Change the transparency value from 0 to 100.
- Time out: Change the How long the oSD menu is on before it automatically exits .
- Rotation: Change the rotation of OSD as Normal /90/180/2709.
Other
- FreeSync(Adaptive Sync): Turn on or off FreeSync (Adaptive Sync).
- HDR: Turn on or off HDR(Requires HDMI&DP Port).
- Flicker Free: Turn on or off Flicker Free.
- Firmware update: Update Firmware by USB port.
- Reset: Return to factory mode.
SPECIFICATION
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the Mm HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
For a smarter way of life.