VILTROX K60 RGB Light Stick User Manual

User Manual

**K60

** RGB Light Stick

Thanks for choosing VILTROX fill light!

Please read the operating instruction carefully so that you can know about and use all functions of the fill light.

Shenzhen Jueying Technology Co., Ltd.     Executive standard: Q/JYKJ002-2019
Tel: +85-755-2877 9024                             Fax: 0755-2877 4730
Email: info@viltrox.com Website: www.viltrox.com
Address: 1207, Floor 12, Block B, Chinto Science & Technology Building, Minzhi Street, Longhua, Shenzhen, Guangdong, China
Production Address: Floor 3, Building 1, Simaiou Science Park, No. 52-1, Juyuan Road, Qiuchang Town, Huiyang District, Huizhou, Guangdong, China

Product Functions

K60 is a kind of handheld RGB tube lamp, the max. power of which is 20W. Featured by high lighting effect, accurate color temperature, high rendering restoration, etc., the lamp is designed with high rendering beads and RGB beads. It is applicable to supplementary lighting in such scenarios as live streaming, product shooting, creative shooting, etc.

Product features

• 26 scenario effects.
• Four operation modes: CCT/HSL/RGBWY/Scene.
• 0°-360° full color, meeting your color requirements for light.
• 0-100% high brightness fill.
• Wide range of color temperatures: 2,500K-8,500K.
• PD/QC fast charge charger.
• A total of 266 high-quality lamp beads, which emit light evenly.
• High-quality soft light tube surface, easy to obtain soft light effect.
• Multiple control methods: control panel , mobile APP, remote control (User needs to purchase it separately).

Precautions

1. Do not use this device for human eyes at close range.
2. Do not subject this device to strong vibration; otherwise, its components may be damaged.
3. Do not disassemble or repair the device by yourself; otherwise, the device may malfunction.
4. Do not expose this device to high temperatures; otherwise, the device may be damaged.
5. Do not cover any items that affect heat dissipation on the lamp body. Excessively high temperature will pose a safety hazard. When the device is used at high power, it is normal for the lamp body to have a high temperature (about 55°C).
6. Do not immerse the device in water or expose it to rain. This device is not waterproof.
7. The battery of this device is low when leaving the factory. Charge it before use. After using the battery, charge it to more than 80% for storage. If this device is idle for a long time, charge it every six months. The power depletion may affect the lithium battery.

 Parts identification

Button Instruction

1. Screen: displays data.
2. SET key: switches between modes.
3. Switch key: switches between various functions.
4. “+, -” keys: adjust the parameter value. [Long press] to quickly increase/decrease the parameter value, and [Short press] to increase/decrease one parameter value.
5. Type-C interface: power interface.
6. Switch button: Long press the switch.
7. 1/4 nut hole: interface accessories can be installed.
8. <(3)+(6)>Reset function: In case of exceptions such as shutdown failure, press the reset button.

Power Supply Mode

Startup status:
If the < > icon appears, the built-in battery supplies power; if the < > icon appears, the Type-C power source supplies power; if the < > icon appears, the Type-C power source supplies power fast.

Shutdown status:
If the < > dynamic icon appears, the Type-C power source is charging; if the <

dynamic icon appears, the Type-C power source is fast charging; if the < > dynamic icon appears, the battery is fully charged.

Note: Using lights during the charging process will increase the charging time or cause charging failure. For faster charging, shut down the device, or use a charger with a current greater than 2A. It is preferred to choose a fast charger with PD/QC protocol. For example, at low voltage, 5V/2A can only be used for charging, and power supply will affect some functions of the lamp.

 Operation Instructions

1. Long press the switch button ( ) , then the light turns on , and the OLED display turns on.
2. Press button to switch mode, and then press < > button to switch the items under such mode; press <+, -> buttons to adjust lighting value.

CCT mode                          HSL mode

RGBWY mode                   SCENE mode

Channel/Group settings

Long press to enter the channel/group setting page, press < > to switch between channels and groups, and press <+, -> to adjust the value. Before using the APP, set the channel number and group number (consistent with those on the APP)

 Light Adjustment by APP

1. Apple system: Search “WeeylitePro” in “APP store” and download the APP to mobile phone and install it. You can also scan the QR code for downloading.
2. Android system: Scan the QR code to download the APR.

|
---|---

For Apple system
Scan the QR code for downloading

|
---|---

For Android system
Scan the QR code for downloading

Connection mode:

1. Enable the Bluetooth of mobile phone first and then open “WeeylitePro” of APR
2. Set the channel No. and group No. of APP in line with those of the product. (If the channel No. and group No. of the product are 1 and A, set the channel and group No. of APP as 1 and A; otherwise, inconsistent parameters will lead to control failure).

APP interface preview                   Product interface preview

1. Channel No.
2. Group No.
3. Light set switch
4. Dimming mode

When the APP does not work, perform the following operations:

1. Check whether the channel number and group number of the fill light and the mobile APP are consistent.
2. Check whether multiple mobile phones use the same channel number and group number. If yes, the light may go out of control and flicker. Change the channel or group, or close redundant APPs.

 Dimming via Remote Control (User needs to purchase it separately)

The product supports dimming by “RC-11” remote control.
Remember to set channel No. and group No. prior to use. (make ensure the channel No. and group No. of light and remote control are consistent)

1. Channel No.

2. Group No.

3. Display screen

4. Long press – Channel No. setting
   Short press – Group No. setting

5. Long press – “Mode” switch
   Short press – “Background” switch

6. Long press – Parameter value will be increased/decreased continuously in a quick manner
   Short press – Parameter value will be increased/decreased one by one

7. Long press power switch
   Short press-All lights of the current channel are off

8. Color temperature

9. Brightness

10. Battery capacity

AAA battery compartment

*Please take the battery out of remote control that will not be used for a long time in order to prevent the leaked liquid of battery from damaging components.

Operating Instructions of Remote Control

1. Long press RC-11 “Power switch” for 2 s and RC-11 power supply and display screen will be on.

2. Set the same “channel No.” and “group No.” by referring to “the controlled photography light”.(LED photography light cannot be operated if the “channel No.” and “group No.” are different)
   Channel No. setting- Long press CH/GRP for 2 s and choose the channel required by +/- buttons; then press “MODE Button” for confirmation.
   Group No. setting-Short press “CH/GRP” to choose among A/B/C/D/E/F.

3. Long press “MODE” button to switch among four modes, including CCT/HSL/RGBWY/SCENE.

4. Short press “MODE” to switch among options. Press +/- to set the value of options.

5. The power supply will shut down automatically if RC-11 is not operated 30 min after startup.

Tips:
If several lights are used for shooting, do not change the channels having been set at will after confirming them. Set different lights into groups, such as including Light A into Group A and Light B into Group B… Special remainder: Do not set different lights into different channels. It is troublesome to adjust light by switching among different channels frequently. The method above is wrong, which will also occupy the channels of others and easily lead to mutual interference.

Specification

affected by factors such as obstacles in the use environment)
Color Rendering Index| RA ≥95 , TLCI ≥97
Power interface| Type-C interface, 5V/2A, 9V/2A, 12V/2A
Battery life| About 1.5h (100% power)
Charging time| About 2~4h (determined by charger power)
Product size| 578.3mm x 40.5mm x 39.2mm
Weight| About 569.5g (bare light)

Warranty Card

VILTROX international is an important file. In case of requiring any warranty services during the warranty period, user needs to show the warranty card and original of invoice, both of which are stamped by the Company’ s authorized dealer. For any information about the change of our designated maintenance outlets and other information, please visit our website at www.viltrox.com. Please keep the warranty card properly, which will not be reissued once lost.

Product name| |

Dealer’ s name/seal

---|---|---
Model|
Warranty period|
Date of purchase|
Contact|

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>