MARINA 35 g9 Pendant Lamps Instructions
- June 11, 2024
- MARINA
Table of Contents
MARINA 35 g9 Pendant Lamps
Specifications
- Model: Marina
- Voltage: Varies (check fixture label)
- Socket Types: G9, E27
- Protection Rating: IP20
- Usage: Indoor (check fixture label for specific usage instructions)
Product Usage Instructions
Safety Instructions
- Only replace cracked safety glass lampshades with appropriate replacements.
- Disconnect the power supply before starting any installation work.
- Avoid using lamps with an IP20 protection rating outdoors.
- Avoid placing the lamp on easily flammable or damp surfaces.
- Connect lamp wires with matching colours from the wall or ceiling.
- Choose a fixation system suitable for the weight of the lamp.
- Keep wires and connections away from heat sources.
- Avoid damaging wiring during installation; refer to the label for guidance.
- Use sleeves to protthe ect main supply wiring to the fixture.
- Refer to the label for bulb wattage and type recommendations.
- Store these instructions in a safe place for future reference.
POWER
DIMENSION
A cracked safety glass lampshade must be replaced.
CONNECTION TO THE NETWORK
Protection class
Technical data: see fixture label.
INSTRUCTIONS
- PENDANT LAMPS
SUJECTION TO THE CEILING
SAFETY INSTRUCTIONS
- Electrical appliances must only be connected by qualified persons.
- Important! Before starting installation work disconnect the main cable from the power supply – remove the fuse or turn the switch to «OFF». The power supply connection must be done with a suitable connecting box, as seen in the illustrations.
- The lamps with an index of protection 20 (IP20) cannot be used outdoors.
- Lamps marked with the symbol may not be installed on easily flammable surfaces such as wood, or carpet.
- Do not attach lamps on surfaces that are damp, freshly painted, or otherwise electrically conductive.
- Connect the wires of the lamp with the same colour as the wires of the wall or the cell. PE or = green/yellow =
- Use the fixation system according to the weight of the lamp.
- Keep away the wires and connections from heat sources.
- Make sure that the wiring is not damaged during the drilling /fixing procedure.
- Be sure to always use the correct type of bulb (see information on the label!).
- Keep these instructions in a safe place.
- Use the sleeves to cover the main supply wiring to the fitting.
- Cleaning is limited to the outer surfaces, shades or protective glass, reflectors and covers. It is important to ensure that no moisture enters the terminal compartment or reaches any live parts! Gold and brass finishing lamps can be cleaned only with a soft cloth (do not use cleaning agents of any kind).
- Use low-pressure halogen lamps with low ultraviolet radiation (UV-STOP).
- Suitable only for indoor use, at 25ºC.
EXPLANATION OF PROTECTION CLASSES
Protection class I: This lamp has an earth terminal. The earth wire
(yellow and green) must be connected to the terminal indicated by the symbol.
Protection class II: This lamp is double insulated and must not be
connected to earth wire.
STAMP OF THE COMPANY
The manufacturer guarantees the proper functioning of this equipment, repairs or spare parts of the model owing to faulty manufacture during 3 years after the surrender date. Responsibility will not be accepted, however, for damages or injury caused through misuse. For any claims, the sale ticket must be presented. The company agrees to repair any defect or malfunction found in the item and any damages said defect or malfunction might directly cause. If the repair should fail to satisfy the customer and/or the object fails to present the optimum condition for the use to which it is destined the guarantee holder will have the right to the substitution of the acquired item for another of identical characteristics or a complete refund of purchase price.
FAQ
- What should I do if the safety glass lampshade is cracked?
- If the safety glass lampshade is cracked, it must be replaced with a suitable replacement to ensure safety.
- Can I use the lamp outdoors?
- Avoid using the lamp outdoors as it is designed for indoor use only. Check the fixture label for specific instructions.
- How should I connect the lamp wires?
- Connect the lamp wires with matching colors from the wall or ceiling. Follow the provided instructions closely for proper installation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>