ETNA KIS670ZT Induction Hobs Instruction Manual
- June 8, 2024
- ETNA
Table of Contents
ETNA KIS670ZT Induction Hobs
Installation instructions
Induction hobs
The fitting of the appliance should only be carried out by a registered and qualified installer. Please read the safety regulations.
Preparations for installation
Pictograms used
- Important information
- Electrical connection
Free space around appliance
- A (mm) min. 650
- C (mm) min. 450
- D (mm) min. 40
This appliance must be earthed.
The electrical connection must comply with national and local regulations.
Connected load
Placing sealing tape
- Accessibility
Electrical connection
2N 380-415V 50/60Hz – 2x 16A
2 fase – 1 nul / 2 phases – 1 neutral
2-2N 220-240V 50Hz – 2x 16A
2 fase – 2 nullen / 2 phases – 2 neutral
1 1N 220-240V 50/60Hz – 1x 32A
1 fase – 1 nul / 1 phase – 1 neutral
3N 380-415V 50/60Hz – 3x 16A
3 fase – 1 nul / 3 phases – 1 neutral
Consult the wiring diagrams on the back of the appliance/Make the required connections on the connecting block.
You can find the most recent version of the installation instructions on our website.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>