HOBART AM16 Commercial Dishwasher User Manual

June 8, 2024
HOBART

HOBART-AM16-Commercial-Dishwasher-LOGO

HOBART AM16 Commercial Dishwasher

DAILY OPERATION

  1. Place strainer and scrap basket into the dishwasher. Make sure to line up arrows.
  2. Close the door. Push POWER button.
  3. When fill is complete, the readout will display READY.
  4. Select the WASH CYCLE: 1, 2, 4, 6 minutes. To load a dishrack, open the door and slide the rack in the machine.
  5. Close the door, the machine will start automatically. The PLAY button turns blue, and a progress bar will appear at the bottom of the screen.
  6. Once the screen shows a check mark and reads CYCLE COMPLETED, the dishrack may be removed. HOBART-AM16-Commercial-Dishwasher-06
  7. To power off machine and drain, hold the POWER button down for 5 seconds.

Wash Cycle

  • Wash
  • Rinse
  • Condense (Vent less)
  • CompleteHOBART-AM16-Commercial-Dishwasher-06

SCAN TO WATCH INSTRUCTIONAL VIDEO

HOBART-AM16-Commercial-Dishwasher-12

hobartcorp.com/am16training

DAILY CLEANING

  1. Spray down the inside of the machine and scrub any hard-to-reach spots with a clean, damp cloth.
  2. Remove rack track, strainer, scrap basket and ASR basket* to clean and rinse.
  3. Make sure the upper and lower wash and rinse arms rotate freely and are clear of any obstructions.
  4. Re-assemble the machine.
  5. Replace strainer and scrap basket,
  6. Install wash and rinse arms (if removed)
  7. Replace rack track
  8. Replace ASR basket if necessary
  9. Close the door. Hold the POWER button for 5 seconds to shut down. Power button will turn half green and lights will turn off when machine is fully drained.
  10. After machine is drained, open hood and clean inside of the machine with a damp cloth.
  11. If there is water remaining in the tank, drain remaining water by holding down the DRAIN button for 3 seconds while the machine is off.
  12. After cleaning, wipe down machine exterior with a damp cloth. Open machine door.
    Blue Bold Text = Clean Daily

REPLACING CHEMICALS

  1. When the machine is out of SANITIZER or DETERGENT an alarm will sound & the machine will automatically pause operation. SANITIZER
    EMPTY or DETERGENT EMPTY and an ICON display on the machine control screen.

  2. Replace the sanitizer or detergent. NOTE: Use only commercial detergents & sanitizers with the AM16.

  3. Chemical pumps will prime automatically once the ENTER button is pressed.

OPERATIONAL TIPS – GET THE MOST OUT OF YOUR DISHWASHER

  • PRE-SCRAP DISHES

  • USE COMMERCIAL DISHMACHINE CHEMICALS ONLY
    Do not use any other chemicals with the dish machine. Use PPE for handling.

  • DELIME THE MACHINE
    The unit will alert you when delimbing is required. When prompted, follow the instructions on the display.
    Note: Deli me instructions will vary based on model. Scan QR code for more information.

SCAN TO WATCH DELIME VIDEO

PROPER RACKING

WILL PROVIDE THE BEST CLEANING RESULTS. HOBART-AM16-Commercial-
Dishwasher-20

DO NOT OVERLOAD RACK

701 S. Ridge Avenue, Troy, OH 45373 |
Phone: 888-378-1338 |
hobartcorp.com |
Resource Center: hobartcorp.com/am16training

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

HOBART User Manuals

Related Manuals