HOBART F48626 Amtl Warewasher User Manual

October 27, 2023
HOBART

HOBART logo F48626 Amtl Ware washer
User Manual

AMTL WAREWASHER
Daily Operation & Cleaning Guide

DAILY OPERATION

HOBART F48626 Amtl Warewasher qr codehobartcorp.com/amtltraining
HOBART F48626 Amtl Warewasher fig 4

  1. Place strainer and scrap basket into the dishwasher. Make sure to line up arrows.

  2. Close both doors. Push POWER button.

  3. When fill is complete, the readout will display READY.

  4. Select the WASH CYCLE: 1, 2, 4, 6 minutes on both the upper and lower section.

  5. On the lower section select “U” for heavily soiled items. Watch video for more information.
    NOTE: Use lower section control to turn on/off the lower section, be sure to turn this section off when not in use.

  6. To load a dishrack, open the door and slide the rack in the machine. Repeat on both sections.

  7. Close both doors, the machine will start automatically. The PLAY button turns blue, and a progress bar will appear behind both buttons.

  8. Once the screen shows a check mark and reads CYCLE COMPLETED, the dishrack may be removed. When using “U” cycle be sure the bottom of the screen reads cycle completed to ensure sanitization.

  9. To power off machine and drain, hold the POWER button down for 5 seconds.

HOBART F48626 Amtl Warewasher fig 1

DAILY CLEANING

HOBART F48626 Amtl Warewasher qr code 1

hobartcorp.com/amtltraining

  1. Spray down the inside of the machine and scrub any hard-to-reach spots with a clean, damp cloth.

  2. Remove upper section wash and rinse arms.
    Remove both rack tracks, level divider, strainerand scrap basket to clean and rinse.

  3. Make sure the upper and lower wash and rinse arms in both sections, rotate freely and are clear of any obstructions. In the lower section check fixed upper wash and rinse arms.

  4. Re-assemble the machine.
    a. Replace strainer and scrap basket,
    b. Replace level divider
    c. Install wash and rinse arms (both sections, if removed)
    d. Replace both rack tracks

  5. Close the door. Hold the POWER button for 5 seconds to shut down. Power button lights will turn off when machine is fully drained.

  6. After machine is drained, open hood and clean inside of the machine with a damp cloth.

  7. After cleaning, wipe down machine exterior with a damp cloth. Open machine door.

Blue Bold Text = Clean Daily

HOBART F48626 Amtl Warewasher fig 2

NOTE: If an error code is present on the screen, if available, press the “checkmark” to clear error.

OPERATIONAL TIPS GET THE MOST OUT OF YOUR DISHWASHER

PRE-SCRAP DISHES
USE COMMERCIAL DISHMACHINE CHEMICALS ONLY
Do not use any other chemicals with the dishwashing. Use PPE for handling.
DELIME THE MACHINE
The unit will alert you when deliming is required. When prompted, follow the instructions on the display.
NOTE: Add deliver based on your chemical providers instruction for an 8 gallon tank.

https://l.ead.me/bbpWzC

PROPER RACKING

WILL PROVIDE THE BEST CLEANING RESULTS.HOBART F48626 Amtl Warewasher fig
3

DO NOT OVERLOAD RACK
NOTE: You can load dishes directly on the lower section rack track if needed.

HOBART logo701 S. Ridge Avenue, Troy, OH 45373
Phone: (888) 378-1338
hobartcorp.com
Resource Center: hobartcorp.com/amtltraining

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

HOBART User Manuals

Related Manuals