Saddle Tramp BC-AMP06 Amp Mounting Bracket Instruction Manual

Saddle Tramp BC-AMP06 Amp Mounting Bracket

Fairing Disassembly

Harley Davidson Street Glide,Electra Glide, Ultra, and Limited models 2014 up

1. Remove (4) T-27 from inner fairing. (Figure A)
2. Remove (3) T-27 from windshield (caution not to drop the outer fairing or windshield). (Figure B)
3. Remove outer fairing, unplugging the headlight. (Figure C)
4. Remove (2) T-27 to remove the fairing vent and remove the vent. (Figure D)

Installing

BC-AMP06 Bracket

1. Remove the four (4) upper Bolt from the Radio support Bracket, using a T25 Torx bit. (Figure E)

2. Place the BC-AMP06 mount in radio cradle. (Figure F)
   ( Caution, Do not over torque Fasteners. Factory spec is 20 In. Lbs.)

3. Reassemble the fairing in reverse order of disassembly, on page 1.

Kit features

• 12 Black zip ties
• 8.5”x6” Hook and loop tape

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>