ELAC PS250 Premium Series Subwoofer Owner’s Manual

ELAC PS250 Premium Series Subwoofer

ELAC Reference Subwoofer

Congratulations on choosing an ELAC Reference Subwoofer. The ELAC Reference Subwoofer is a premium subwoofer that provides excellent sound quality. The subwoofer comes with a removable grille, power cord, and spikes (4). It is recommended to read the Reference Subwoofer Owner’s Manual to familiarize yourself with all the features and to achieve the best performance.

Unboxing

When unboxing the subwoofer, make sure to have all the necessary components:

• Premium Subwoofer
• Removable Grille
• Power Cord
• Spikes (4)

Placement
The ELAC Reference Subwoofer can be placed in either of the following ways:

• Corner Placement using CJ spikes (4)
• Front Placement

Connections
The ELAC Reference Subwoofer can be connected in two ways:

1. If using an AV receiver with a subwoofer output, connect a single RCA cable from the subwoofer out to the Right/LFE input on the subwoofer.
2. If your receiver, pre-amp, or integrated amplifier does not have a dedicated subwoofer output, connect a set of stereo RCA connectors from the  pre-outs (variable) from your pre-amp and integrated amp to the RCA inputs on the subwoofer.

Firmware Update

If you need to update the firmware for your subwoofer, follow these steps:

1. Download the firmware from www.elac.com under the troubleshooting and firmware section.
2. Unzip the downloaded firmware file and place the FIRMWARE_UPDATE_FILE.BL2 file in the root directory of a FAT32 formatted USB flash drive.
3. Power off the subwoofer, wait 60 seconds and plug the USB flash drive into the USB port on the rear of the subwoofer.

Congratulations on choosing an ELAC Reference Subwoofer.
We are excited for you to join our journey through “The Life Of Sound”.
Let’s get you started in a few easy steps.
We recommend reading the Reference Subwoofer Owner’s Manual to familiarize yourself with all the features and to attain the best performance.

UNBOXING
Included with your Premium Subwoofer:

PLACEMENT

CNNECTIONS

• Download IOS/ Android APP. Sub Control 3.0

• CONFIGURE AND CONTROL WITH ELAC SUB CONTROL 3.0 APP

• RUN AUTO EQ

Premium Series Subwoofer

Models : PS250, PS350, PS500

Thank you, and Congratulations on bringing home an ELAC Premium Subwoofer.
ELAC Premium subwoofers embody 95 years of creating audio excellence through tradition, craftsmanship, and innovation.
They are developed by a passionate group of individuals whose sole purpose is to bring a new dimension of sound quality into your home – The life of Sound
ELAC subwoofers are best in class, designed for deep bass, power, and dynamic ability, blending to any environment to be enjoyed at any listening level.
As the pioneer of APP-controlled subwoofers, all Elac subwoofers include APP control to help with auto room correction and easy setup of multiple subwoofers. Visit the Apple® App® Store or Google PlayTM Store and search Elac Sub Control 3.0.
Enjoy!
If you have any questions about your Premium Subwoofer, please contact us directly.
www.elac.com • customerservice@elac.us • (714)-252-8843
Journey Together Through – The Life of Sound

Contents

• Grille

• Power Cord

• Spikes (4pcs)

Back Panel Features

Connecting your Subwoofer

1. If using an AV receiver with a subwoofer output connect a single RCA cable from the subwoofer out to the Right/LFE input on the subwoofer.
2. If your receiver, pre-amp, or integrated amplifier does not have a dedicated subwoofer output connect a set of stereo RCA connectors from the pre-outs (variable) from your pre-amp and integrated amp to the rca inputs on the subwoofer.
3. Turn on power switch to “ON” position

Default Settings

1. Volume 75%
2. Low pass at 70 Hz @ 12 dB
3. Preset defaulted to Music

Firmware Update

Note:
Firmware for your subwoofer can be downloaded from www.elac.com under the troubleshooting and firmware section.
USB drive must be compatible with USB 2.0 with a 512 byte hardware sector size.

1. Unzip the downloaded firmware file and place the “FIRMWARE_UPDATE_FILE.BL2” file in the root directory of a FAT32 formatted USB flash drive. exFAT, NTFS and other file systems are not compatible.
2. Power off the subwoofer, wait 60 seconds and plug the USB flash drive into the USB port on the rear of the subwoofer.
3. Power on the Subwoofer. The firmware update will automatically begin.
4. The firmware update will be complete when the LED on the rear of the subwoofer stops flashing.
5. Power Cycle the subwoofer. The firmware update is now complete.
6. you can check the firmware version of the subwoofer in the Sub Control 3.0 app on the about page.

Factory Reset

Note:
RESET erases all data and restores subwoofer firm-ware and parameters to the original factory settings.
Firmware upgrade may be necessary post RESET.

1. Press and hold down RESET button for minimum of 10 seconds
2. LED starts to blink (flash). LED blinking parameters: LED is on for 100 ms (millisec-onds) then LED is off for 100 ms.
3. Release the RESET button before 15 seconds elapses in order to force the sub to perform Factory Reset
4. If the RESET button is hold down for more than 15 seconds Factory Reset is can-celled.

Optional Spike Installation

Included with your subwoofer are four optional spikes that can be used` when the subwoofer is used on carpet.
If you are installing the subwoofer onto hardwood, tile or other non-carpeted surfaces please use spike discs (Not included), or do not install the spikes to prevent any dam-age to your floor.

1. Attach the spikes by screwing them into the threaded inserts on each of the four cor-ners on the bottom of the subwoofer.
2. The nut on the spike is used to the lock the spike at the desired height.

Subwoofer Placement

Corner Placement

Placing a subwoofer in a corner excites most room modes and offers the best chance of avoiding a null area (a part of the room that experiences an acoustic reduction in bass).
If placing the subwoofer in the corner creates an excessive amount of bass, you can try moving the subwoofer away from the wall or run Auto EQ feature of the ELAC Sub Control APP to minimize the effect of corner placement.

Front Placement

If you believe you are getting too much bass from having your subwoofer located in a corner of the room, you can position the subwoofer between your front left and right speakers.
This will reduce “loading” of bass and can aid in reducing localization of bass frequencies.

Dual Placement

Utilizing dual subwoofers can help distribute bass frequencies more evenly and provide better coverage in the room.
Since every room is unique, If possible the best option is to move the subwoofers around the room and find the location that sounds the best from your normal listening position. There are many test discs you can purchase that provide the correct test signals for helping find this optimum location.
Note: The PHASE and DELAY functions built into the subwoofer will also help if you experience any placement issues.

Front stage in the corners or adjacent to the center channel.

Opposite diagonal front and rear.

Specifications

| PS250-BK| PS350-BK| PS500-BK
---|---|---|---
Speaker Type| Bass Reflex
Woofer| 10” HE PP Cone| 12” HE PP Cone| 15” HE PP Cone
Frequency Response| 27Hz to 150Hz| 24Hz to 150Hz| 20Hz to 150Hz
LFE@90dB/1m, Hz Anecho- ic/In room| 27Hz / 24Hz| 24Hz / 21Hz| 20Hz / 16Hz
Maximum Output Level, SPLdB/1m anechoic| 107 dB| 108 dB| 115 dB
Low pass crossover, Hz| 40Hz to 150Hz| 40Hz to 150Hz| 40Hz to 150Hz
Maximum power, Wrms@4 Ohm (Measured)| 250 Watts| 350 Watts| 500 Watts
App Controlled (BLE)| iOS and Android
Amplifier Topology| BASH
Standby Power Consumption| < 0.5W
Inputs| RCA Line Level
Data Connection| USB (Firmware Update)
Cabinet Finish| Black Vinyl
Accessories Included| Grille, AC power Cord, Spikes
Height| 381 mm| 437 mm| 480 mm
Width| 360 mm| 416 mm| 460 mm
Depth| 360 mm| 418 mm| 460 mm
Net Weight| 16.4 Kg| 27.8 Kg| 25.9 Kg

Safety Instructions

1. General information

   • Please read and follow these safety instructions.
   • Keep them safe for future reference.
   • Observe all warnings on the speaker and in the manual. Please check the speaker for damage before use. The speaker must be in perfect working condition. Damaged parts may lead to personal injury.

2. Use only as directed

   • Connect the speaker(s) according to the instructions in the manual.
   • Many ELAC speakers are equipped with spikes and/or anti-slip feet. They are explicitly provided for leveling the speaker. For leveling on an uneven floor, unscrew the spikes or anti-slip feet by 2- 3 turns of thread. The speaker should always be in perfect vertical alignment: the stability of the speaker must not be compromised by using spikes or anti-slip feet as the speaker may tip-over.

3. Location

   • Install the speakers on a level surface only.
   • When choosing the location of these speakers do not place them in locations that are:
   • In direct sunlight
   • Very humid
   • Prone to vibrations
   • Exceptionally hot or cold
   • Near CRT Televisions (the speakers are not magnetically shielded and may cause color issues with a CRT based TV).sa
   • Close to magnetic cards (Since the speakers are not magnetically shielded placing magnetic cards such as credit cards or commuter cards may cause them to fail).

4. Overload
   Please ensure the product is perfectly stable to avoid injury from tip-over. Please note, that stability can be increased by using spikes on carpeted surfaces. However, the mounting of spikes must be carried out carefully due to their very sharp ends which may cause injuries. The stability on slippery floors can be increased by using Velcro fastening tape or double-sided adhesive tape. Do not install the speaker near any heat sources such as radiators, heating valves, stoves, or other apparatus (including amplifiers) that produce heat, or in areas where there is a risk of explosion.

   • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
   • Do not install the speaker in a closed rack or in a closed cupboard.
   • Do not put burning candles on or near the speaker.
   • Do not install the speaker near transformers because electromagnetic stray fields can cause hum noise on woofers.
   • In combination with certain materials / lacquers / material surfaces, anti-slip feet or spike washers may cause colored imprints on the surfaces.

5. Overload
   Extreme overload of the device due to very high volume may cause individual components to blow. Because of the possible danger, you should never leave loudspeakers under extreme overload conditions unattended.

6. Service
   DANGER! Do not open the cabinet because the components and conductors may carry dangerous levels of electricity! Servicing to be carried out by qualified service personnel only.
   Servicing is required when the loudspeaker has been damaged in any way, such as damage to the power supply cord or the plug, or when liquid has been spilled or objects have fallen into the loudspeaker, the speaker has been exposed to rain or moisture, does not operate normally, or has been dropped. To reduce the risk of electric shock, do not open the loudspeaker. Servicing to be carried out by qualified service personnel only .

7. Fuse links
   Various faults in subwoofers or active speakers may cause the fuse to blow. If the fuse blows, only replace it with the correct fuse type and rating as shown on the rear of the loudspeaker on the fuse holder. A second fuse is included with the device (in the fuse holder beneath the mains socket).

8. Cleaning
   NOTE: Clean only with soft, smooth cloth or with dust brush. Do not use scouring agents, alcohol, benzene, furniture polish or other agents for cleaning! Modern furniture is often coated with multiple varnishes and plastics which can be treated with chemical agents. Some of these agents contain substances which degrade or soften the rubber feet. Therefore, we advise you to place an anti-slip mat underneath the loudspeaker.

9. Volume
   CAUTION! Continuous high volume may cause severe damage to your hearing. Please listen responsibly.

10. Disposal
    The packaging is made from recyclable materials. Dispose of this in an environmentally friendly manner. At end of product life do not dispose of the speaker(s) with standard household waste. The speaker must be recycled in accordance with local legislation. Ask your local government for further information on recycling as the device contains valuable raw materials. Disable the speaker before disposal.

11. Power
    This subwoofer is only intended to be connected to voltages that are listed on the rear panel of the cabinet. Connection to any other voltage may cause irreversible damage to the subwoofer and will void the warranty. Use of plug adapters is not recommended because they may allow connection to voltages other than those printed on the back of this subwoofer.

Warranty

ELAC Americas Inc.
North America Limited Liability Warranty
ELAC Americas Inc. warrants to the original purchaser that this product be free from defects and or workmanship for a period of 1 (One) year from the original date of purchase. During this time period, repair or replacement of parts will be free of charge to the original owner (See below limitations). Shipping to and return from the repair center will be the responsibility of the original purchaser.

Limitations

• Warranty begins on the date of original purchase from an authorized ELAC Americas Inc. dealer.
• Product is warranted only if used in home applications within the max power rating specified in this manual. Commercial use of this product is not warranted.
• Product that has been modified or altered in anyway will not be warranted.
• Product that has been abused or subjected to faulty equipment will not be warranted.
• Products with defaced or removed serial numbers will not be warranted.

If service is required
In the event that service is required, please contact ELAC America at 888-541-0996 or at
customerservice@elac.us to arrange for service or replacement. You will be responsible to provide proof of purchase (Copy or original sales receipt). Shipping to and from our repair center will be the responsibility of the original purchaser.

Warranty Outside of North America
This warranty applies to products purchased in the United States and Canada. For warranty claims outside of North America please contact the local dealer/distributor in the country of purchase.

FIRMWARE UPDATE

VARRO SUBWOOFERS
Congratulations on choosing an ELAC Varro Subwoofer.
We have made firmware updates to improve Auto EQ and APP experience.
For best experience, we suggest you update your subwoofer firmware as per the below procedure and with the provided USB Flash Drive.

UNBOXING
Included with your Subwoofer:

DOWNLOAD APP

• Download 10S/ Android APP Sub Control 3 O

• ONCE FIRMWARE 14:i UPDATED YOU Will SEE YOUR SUBWOOFER IN THE LIST or ALL /\VAILAOL[ SUBWOOFERS

FIRMWARE UPDATE

1. With the subwoofer powered off, plug in the provided USB Flash Drive.
2. Power on the Subwoofer. The firmware update will automati­cally begin.
3. The firmware update will be complete when the LED on the rear of the subwoofer stops flashing.
4.  You can check the firmware version of the sub woofer in the Sub Control 3.0 app on the about page. Firmware Ver: will end with “.95″­

TOTAL PERFORMANCE

Begins With Design
Eliminate the challenges of placement with ELAC‘s AUTO EQ
ELAC’s new Premium subwoofer series provides unbeatable power and performance with a sleek, modern design. These new models deliver huge performance at an affordable price. With advanced features such as BASH Amplification, Advanced App Control and ELAC’s revolutionary Auto EQ system, the new Premium Series is the perfect solution for completing your home theater or music setup.

PRODUCT DETAILS

• Custom Design
  Vinyl wrapped, elegant and acoustically balanced, 30mm cabinet, damped and internally braced eliminating unwanted resonance for maximum performace.
  

• Custom Amplifier
  Powerful BASH amplifier with Dual 4-channel DSP and 32-bit DACs. BLE APP control.
  

• Custom Driver
  Treated paper cone with a large 2.0” voice coil for increased power handling and thermal management, resulting in higher output SPL.
  

• DSP (Digital Signal Processor) – A dual 28-Bit DSP with a 147mHz master clock frequency is utilized to process audio signals with high accuracy and minimum latency.

• Treated Paper Cone – These new high excursion woofers utilize a lightweight pa- per cone that has been treated to enhance stiffness and reduce any affects caused by temperature or humidity changes.

• Large Diameter Voice Coils – All three Premium Series subwoofers feature a large 2” voice coil for increased power handling and thermal management, resulting in higher output SPL.

• Auto Room EQ – Finding the perfect location for your subwoofer can be difficult or just not visually appealing. Utilizing our new Sub Control 3.0 app and your smart-phone microphone, the subwoofer will optimize room EQ automatically, allowing greater flexibility in place-ment without sacrificing performance.

• BASH Amplifier – This new amplifier uses a modulated switched mode power supply allied to a conventional class AB amplifier. Switching at more than 400,000 times per second, the supply tracks the incoming audio signal to ensure that the Class AB amplifier gets only the voltage necessary (with a little headroom) to cope with today’s dynamic movie and music content, thus maximizing the efficien-cy and potential of the amplifier.

• Advanced APP Control – Doing away with traditional analog controls, our new Premium Series subwoofers incorporate our advanced digital control system. Simply download the ELAC Sub Control 3.0 app for your Android or iOS phone or tablet and you have complete control of multiple subwoofers from the comfort of your sofa.
  

SPECIFICATIONS

| PS250-BK| PS350-BK| PS500-BK
---|---|---|---
Speaker Type| Bass Reflex
Woofer| 10” Treated Paper| 12” Treated Paper| 15” Treated Paper
Frequency Response (Anechoic)| 27Hz to 150Hz| 24Hz to 150Hz| 20Hz to 150Hz
Frequency Response (In Room)| 24Hz to 150Hz| 21Hz to 150Hz| 16Hz to 150Hz
Maximum Output Level, SPL dB/1m anechoic| 107 dB| 108 dB| 115 dB
Low pass crossover, Hz| 40Hz to 150Hz| 40Hz to 150Hz| 40Hz to 150Hz
Ampliifer power, @4 Ohm (RMS/ Peak)| 250/500 Watts| 350/700 Watts| 500/1000 Watts
App Controlled (BLE)| iOS and Android
Amplifier Topology| BASH
Standby Power Consumption| < 0.5W
Inputs| RCA Line Level, Speaker Level
Data Connection| USB (Firmware Update)
Cabinet Finish| Black Vinyl
Accessories Included| Grille, AC power Cord, Spikes
Height| 381 mm| 437 mm| 480 mm
Width| 360 mm| 416 mm| 460 mm
Depth| 360 mm| 418 mm| 460 mm
Net Weight| 16.4 Kg| 21.8 Kg| 25.9 Kg

• Custom design steel basket
• Strong 30mm MDF cabinet
• Internal Cross bracing elminates unwanted cabinet resonace
• Powerful BASH Amplifier 250/350/500 Watts
• High excursion Custom woofer with long 2” voice coil
• Powerful Ceramic grade 5 Magent – 140x62x25 mm
• Acoustic Damping further reduces unwanted cabinet resonances

“ DURABLE AND STRONG “

1938 N. Batavia Street Suite K Orange, CA 92865
www.elac.com – info@elac.us

References

• Elac – The life of sound | Best Audiophile Speakers

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>