MAXIM 11122 Harbor 1 Light Pendant Instruction Manual
- June 8, 2024
- MAXIM
Table of Contents
PRODUCT NAME:Harbor 1-Light pendant
ITEM NUMBER: 11122
Instruction Manual
11122 Harbor 1 Light Pendant
Please consult your electrician for hanging fixture and wiring.
Light Source : 1 E2660W (Not include)
Made in China
Before Getting Started
– Read the instructions carefully prior to assembling the product.
– When you open the package with a sharp tool like a cutter knife, be careful
not to damage the components inside.
– Carefully remove all packaging materials and retain for future use.
– Keep all hardware parts and packaging out of reach of small children.
– Choose a clean, level, spacious assembly area.
– Avoid hard surfaces that may damage the product.
– Ensure that you have all required contents for complete assembly.
– Take care when lifting. Assemble the product in close proximity to where you
intend to position the item.
– Do not over tighten the screws and bolts as this may damage the threads.
– Do not let children play with this product.
Risk of suffocation!
Keep any packaging materials away from children.
Lamp Care Instructions
– Carefully read through the instruction sheet before assembly and using the
product.
– Caution there is a risk of shock. Disconnect from power source before
assembling or cleaning.
– Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
– Only use the recommended bulb type and do not exceed the maximum wattage as
it could cause fire.
– Do not plug the product in if cord is torn or frayed.
Cleaning & Maintenance
– On polished finishes, often using talc powder reduces the appearance of
fingerprints and other smudges.
– For respective shade surfaces, use the appropriate cleansers, i.e. glass
cleaner, acrylic polish, and wood polish.
– Clean with soft cloth and a mild detergent.
– DO not use abrasive cleaner.
– Periodically (every 90 days) make sure that the screws are fully tightened.
– Prolonged exposure to heat sources may cause glazing, melting and scorching,
or even cause color to fade.
Contents
Before getting,started,ensure the package contains the following
components:
| A | Lamp Frame | X1 |
|---|---|---|
| B | MOUNTING BRACKET | X1 |
| C | Support screw | X2 |
| D | Canopy | X1 |
| E | Wire nuts | X3 |
| F | BALL NUT | X2 |
| G | 12″ STEMS-STR04812-YL | X3 |
| H | 6″ STEMS-STR04806-YL | X1 |
| I | GLASS SHADE-GLS11120CL | X1 |
| J | THUMB SCRENS | X3 |
Run wire through stems and combine stem lengths to meet desired mounting height