SHANGRI-LA SLVICVELKGA Victoria Velvet Bed User Guide
- June 8, 2024
- SHANGRI-LA
Table of Contents
SLVICVELKGA Victoria Velvet Bed
User Guide
VICTORIA VELVET BED KING
SLVICVELKGA, SLVICVELKEA, SLVICVELKNA
SLVICVELKGA Victoria Velvet Bed
COMPONENTS
ASSEMBLY
Step 1: Align the two holes of the bracket on the side rail (C) with the
end of the headboard (A). Insert and tighten a 30mm M8 screw (1) through each
hole of the bracket using the Allen key (6).
Once secured, attach the bracket on the other end of the side rail (C) to the
footboard (B) the same way, then repeat with the other side rail (C) on the
other side of the bed.
Step 2: Attach the legs (F) to the
corners of the bed, securing them onto the headboard (A), footboard (B) and
side rails (C) using the 20mm M8 screws (2) and Allen key (6).
Step 3: Insert the long slats (D) into the headboard (A) and
footboard (B). Secure by inserting and tightening 25mm M8 screws (3) using the
Allen key (6).
Step 4: Align the holes on the bottom supports
(E) under the holes marked on the long slats (D). Insert and tighten 35mm M6
screws (4) through the holes using the Allen key (6). Insert and tighten a M6
nut (5) on the underside of the bottom supports (E) using the wrench (7
).
Step 5: Connect three short slats (G) using the single and
double-sided caps (I, H) as shown below. This will create a slat assembly.
Repeat this process until you have 13 slat
assemblies.
Place and align one slat assembly’s single and double-sided caps (I, H) onto
the bed with the marked dots on the side rail (C) and long slats (D).
Repeat with the remaining slat assemblies.
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com 
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>