MAX STORM 3 Vacuum Cleaner For Pedicure User Guide
- June 3, 2024
- max
Table of Contents
MAX STORM 3 Vacuum Cleaner For Pedicure
MAX STORM 3 PEDICURE DUST COLLECTOR
USER’S GUIDE
General description
The MAX Storm 3 dust collector is designed to be integrated into the foot
stand. It is used for removing dust and skin particles that appear during the
pedicure process.
Complete set
- Dust collector with a filter bag installed.
- Additional filter bag.
- Passport.
Operational principles
The manicurist works in the dust collector fan grill area. The dust-air
mixture is sucked with the fan impeller of the dust collector. Clean air flows
back into the room after its filtration through the bag filter. Dust is
collected inside the filter. The manicurist cleans the filter bag after
finishing.
Installation of the dust collector
- Loosen the fasteners and pull out the top of your pedicure stand along with a pillow.
- Turn its soft part down. Remove the fasteners that fix the lower metal and upper soft part of the stand.
- Insert the dust collector so that during reinstallation it would be installed with the fan facing down. Center it to be symmetric with respect to your stand. Put the metal part on it and mark the holes in the mounting part of the dust collector (rectangular in shape).
- Drill holes. Reassemble the stand using standard fasteners of the stand. If necessary, use longer fasteners (not included).
Usage
- Install the filter bag on the fan. Do it carefully. The bag must be put on the entire surface of the fan. Before using, spread the filter bag evenly.
- Make sure that the filter bag is fixed evenly and not jammed.
- Before switching on, make sure that there are no foreign objects between fan blades.
- Insert the plug into the 220V electrical mains. Use the switch located on the wire to turn it on and off.
- After the first switching on, it is recommended to lift the dust collector and make sure that the bag is puffed and nothing disrupts the air flow.
- Work in the area of the dust collector fan impeller approximately 1.5 cm away from the edge of the grill to the center.
Safety measures
- Do not allow hands or foreign matter entering into the moving blades of the fan.
- When you need to switch the dust collector off, pull the plug, not the electrical cord.
- Do not use it with wet towels and water.
- Do not use the cable as a handle for carrying.
- Disconnect the dust collector from the outlet during every bag handling operation.
Care
Keep the dust collector body clean. Regularly remove dust from the blades and
the base of the fan impeller using a soft brush or compressed air. Do not use
solvent or other aggressive liquids (e.g. lacquer removal liquid) to clean the
device.
The dust collector includes a multi-layer filter bag for collecting dust. Its
purity determines the efficiency of the device. Clean dry bag must be used for
the dust collector to provide correct functioning.
Change the filter bag for a clean one before starting the working day. Wash
the bag to clean it from dust. Manual or delicate machine washing with water
temperature of not more than 40 degrees is permitted. During active operation
it is recommended to change the filter-bag at least once a day. Service life
of bag is 1.5-2 months.
Specifications
- Airflow: up to 96 CFM (up to 164.64 m3/h).
- Noise: up to 45 dB.
- Mains voltage: 220 V.
- Frequency: 50/60 Hz.
- Impeller speed: up to 3100 rpm.
- Maximum capacity: up to 32 W.
- Dimension: LWH 28033080 mm.
- Weight: 1.3 kg.
Warranty does not cover
- Damages caused by incorrect operating conditions, and operation under conditions and for purposes not envisaged by the manufacturer.
- Mechanical and thermal damage of the dust collector and its parts.
- Water-related damage.
- Goods with traces of unauthorized repairs.
- The filter bag.
Possible problems and solutions
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>