KEYOLA LED Under Cabinet Lighting Fixture Kitchen Under Counter Lights Instructions

KEYOLA LED Under Cabinet Lighting Fixture Kitchen Under Counter Lights

Product Information

The product is an LED Puck Light Kit that comes in different configurations: 1 Puck Light Kit, 4 Puck Lights Kit, 6 Puck Lights Kit, and 12 Puck Lights Kit. The dimensions and specifications of each kit are as follows:

• 1 Puck Light Kit: L1=150cm/59inch, L2=50cm/19.6inch, L3=25cm/9.8inch, L4=200cm/80inch
• 4 Puck Lights Kit: A1=150cm/59inch, A2=50cm/19.6inch, A3=30cm/11.8inch, A4=200cm/80inch
• 6 Puck Lights Kit: B1=150cm/59inch, B2=50cm/19.6inch, B3=30cm/11.8inch, B4=200cm/80inch
• 12 Puck Lights Kit: C1=120cm/47.2inch, C2=100cm/39.4inch, C3=50cm/19.6inch, C4=30cm/11.8inch, C5=90cm/35.4inch, C6=25cm/9.8inch, C7=150cm/59inch, C8=200cm/80inch

The product is powered by DC12V and has a power consumption of 2W. It has a beam angle of 120 degrees.

Product Usage Instructions

Step 1: Connection
Depending on the kit you have, follow the connection instructions below:

• 1 Puck Light Kit: Connect the adapter directly to the connection cord (R).
• 4 / 6 / 12 Puck Lights Kits: Connect the adapter directly to the splitter (J) without using the component controller (E) and on/off switch (D).

Note : For 4 / 6 / 12 Puck Lights Kits, not all ports of the splitter (J) need to be connected to all the puck lights (I).

Step 2: Installation
There are two installation methods for the LED Puck Lights:

• Installation Way I: Mounted With Screws (P)

1. Open the cover of the LED puck light (I) according to the arrow direction.
2. Mount the screws (P) through the installation holes to fix the puck light in the desired position.
3. Tighten the cover of the puck light.

• Installation Way II: Install with Two Sided Stickers (M)

Use the provided two-sided stickers (M) to stick the puck light on the desired installation position.

Step 3: Remote Fixation
Use the provided two-sided sticker (N) to mount the remote bracket (L) on the desired installation surface. Fix the remote (K) onto the remote bracket (L).

Your LED Puck Lights are now ready to be used as per your desired configuration and installation method.

Light Fixture Instruction

**Product Profile & Packing

**

Profile

• 1 Puck Light Kit
  L1=150cm/59inch| L2=50cm/19.6inch| L3=25cm/9.8inch
  ---|---|---
  L4=200cm/80inch|  |
• 4 Puck Lights Kit
  A1=150cm/59inch| A2=50cm/19.6inch| A3=30cm/11.8inch
  ---|---|---
  A4=200cm/80inch|  |
• 6 Puck Lights Kit
  B1=150cm/59inch| B2=50cm/19.6inch| B3=30cm/11.8inch
  ---|---|---
  B4=200cm/80inch|  |
• 12 Puck Lights Kit
  C1=120cm/47.2inch| C2=100cm/39.4inch
  ---|---
  C3=50cm/19.6inch| C4=30cm/11.8inch
  C5=90cm/35.4inch| C6=25cm/9.8inch
  C7=150cm/59inch| C8=200cm/80inch

Packing List

NO| Part Name| Specifications| 1 Puck Lights Kit| 4 Puck Lights Kit| 6 Puck Lights Kit| 12 Puck Lights Kit
---|---|---|---|---|---|---
A| Plug Cord| L=120cm/47.2inch|  |  |  | 1
B| Adapter| Input:AC100-240V 50/60HZ

L=100cm/39.4inch 12V 3A

|  |  |  | 1(12V3A)
C| Adapter| Input:AC100-240V 50/60HZ

L=150cm/59inch

| 1(12V

0.5A)

| 1(12V1A)| 1(12V1A)|
D| On/Off Switch| L=50cm/19.6inch| 1| 1| 1| 1
E| Controller| L=30cm/11.8inch|  | 1| 1| 1
F| Power Extension| L=90cm/35.4inch|  |  |  | 1
G| Splitter for Adapter| L=25cm/9.8inch|  |  |  | 1
H| Extension Cord| L=150cm/59inch|  |  |  | 6
I| Puck Lightr| L=200cm/80inch| 1| 4| 6| 12
J| 6 Way Splitter| White Splitter|  | 1| 1| 2
K| Remote| 14 Keys|  | 1| 1| 1
L| Remote Bracket| White Bracket|  | 1| 1| 1
M| Two Sided Sticker| Circular, Diameter: 40mm| 2| 8| 12| 24
---|---|---|---|---|---|---
N| Two Sided Sticker| Rectangle,

Dimension: 25X20mm

|  | 1| 1| 1
P| Screw| ST3.5x10mm, Phillips Self-tapping Screw| 2| 8| 12| 24
R| Connection Cord| L=25cm/9.8inch| 1|  |  |

Specifications of the puck light

Installation

Warning : Please read the instructions carefully and turn the electricity off before installation.

1. To avoid equipment damage or other accidents caused by short circuits, please ensure that the connectors are fully inserted when connecting the wires.
2. Please install the Adapter ( B/C ) in a well-ventilated place where the ambient temperature is appropriate.
3. If you find some issues after installation, please try to fix them according to the below Fault Analysis & Solution. If the issues still won’t be solved, please contact the seller for support.

Step 1: Two Installation Ways Of LED Puck Lights The connection of 1 puck light kit refers to the below picture.

• The connection of the 4 puck lights kit refers to the below picture.
• The connection of the 4 puck lights kit refers to the below picture.
• The connection of the 12 puck lights kit refers to the below picture. The two extension cords (H) can be connected to each of the puck lights (1).
  • No need to connect like the picture shows.
• The connection of the 6 puck lights kit refers to the below picture.

Note:

1. As for 1 puck lights kit, the adapter can be connected directly with the connection cord (R) without the component on/off switch (D).
2. As for 4 / 6 / 12 puck lights kits, the adapter can be connected directly with the splitter (J) without the component controller (E) & on/off switch (D).
3. As for 4 / 6/12 puck lights kits, all the ports of the splitter (J) don’t need to get all the puck lights (I) connected for your use.

Step 2 : Two Installation Ways Of LED Puck Lights ****

1. Installation Ways I: Mounted With Screws (P)

   • As the picture shows, please open the cover of the LED puck light (l) according to the direction of the arrows.
   • Get the screws (P) mounted through the installation holes to fix the puck light in the installation position.
   • Tighten the cover of the puck light.

2. Installation Ways II:
   

   • Install with Sided Stickers (M)
   • Use two-sided stickers to stick the puck light on the installation position.

Step4: Fix the Remote (K)

• Use the two-sided sticker (N) to get the remote bracket (L) mounted on the installation position, and put the remote (K) into it.
• So far, the installation of puck lights has been completed.
• Remove the plastic sheet of the remote and use the remote to control the lights.
• The instruction for using the remote control refers to another separate manual.

Note : As for the 1 puck lights kit, it is not equipped with the remote (K).

Fault Analysis & Solutions

connected with the splitter directly. If all the lights can turn on, it is the issue of the controller.

**** 2.  Remove the controller (E) and the on/off switch (D), then get the adapter connected with the splitter directly. If all the lights still don’t turn on, it is the issue of the power supply.

| 1. Replace the controller

2.  Replace the power supply

Individual light is not on| 3. Install the defective puck light with other ports of the splitter to check whether it can work well. If it still doesn’t work, it is the issue of the puck light.| 3. Replace puck light
The remote doesn’t control the lights.| 4. Not remove the plastic sheet

5. The battery of the remote is not charged.

6. The remote don’t pair with the controller. Or the remote is paired with other controller.

| 4.  Remove the plastic sheet

5. Replace the battery of the remote

6. Repair with remote control

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>