CM1000v2 User Manual: Set Up & Activate Your NETGEAR Cable Modem | NETGEAR Support

The CM1000v2 User Manual provides detailed instructions on how to set up and activate your NETGEAR High Speed Cable Modem. With speeds up to 1 Gbps, this cable modem is certified by all major cable Internet providers and supports the assignment of IPv4 and IPv6 addresses. The manual covers topics such as unpacking the cable modem, hardware and internet setup, and activating your internet service. It also includes information on how to connect your cable modem to a router after installation and activation. The manual provides step- by-step instructions on how to install and activate your cable modem, including connecting it directly to a computer during the installation process. The user is advised to collect their cable account number, account phone number, and login information before contacting their cable Internet provider. The manual also includes contact information for various cable Internet providers and provides instructions on how to perform a speed test to determine the accurate internet speed. Overall, the CM1000v2 User Manual is a comprehensive guide that provides all the necessary information for setting up and activating your NETGEAR High Speed Cable Modem.

High Speed Cable Modem

Model CM1000v2

User Manual

Draft October 2018
202-11665-xx

350 East Plumeria Drive
San Jose, CA 95134 USA

Support
Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register your product, get help, access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR support resources.
Conformity
For the current EU Declaration of Conformity, visit http://kb.netgear.com/app/answers/detail/a_id/11621.
Compliance
For regulatory compliance information, visit http://www.netgear.com/about/regulatory. See the regulatory compliance document before connecting the power supply.
Trademarks
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes only.

Hardware and Internet Setup

The NETGEAR High Speed Cable Modem provides a connection to high-speed cable Internet with speeds up to 1 Gbps.1 The cable modem is certified by all major cable Internet providers. A Gigabit Ethernet port provides fast access and downloads. The cable modem supports the assignment of IPv4 and IPv6 addresses by cable Internet providers.

This chapter covers the following topics:

• *       * Unpack Your Cable Modem

  • Front Panel
  • Product Label
  • Back Panel
  • Install and Activate Your Cable Modem
  • Connect Your Cable Modem to a Router After Installation and Activation

Note: For more information about the topics covered in this manual, visit the support website at support.netgear.com.

Unpack Your Cable Modem

Your package contains the following items.

Figure 1. Package contents

Front Panel

The cable modem provides status LEDs on the front.

You can use the LEDs to verify the status and connections. The following table lists and describes each LED on the front panel of the cable modem.

Table 1. LED descriptions

Product Label

The product label on the side of the cable modem displays the serial number and MAC address of the cable modem and login information, including the default  IP address, default user name, and default password.

Back Panel

The back panel provides the connections and button shown the following figure.

Install and Activate Your Cable Modem

The cable modem provides a connection between your cable Internet provider’s network and your computer, router, or WiFi router.

Install Your Cable Modem and Connect It to a Computer

During the installation and activation, you must connect the cable modem directly to a computer. After installation and activation, you can connect the cable modem to a router (see Connect Your Cable Modem to a Router After Installation and Activation on page 12).

Note: Before you connect your cable modem and contact your cable Internet provider, collect your cable account number, account phone number, and login information (your email address or user name and password).

  To install your cable modem and connect it directly to a computer:

1. Turn off existing modems and routers.
   If you are replacing a modem that is currently connected to your home, unplug the modem and plug the new cable modem into the same outlet.

2. Connect a coaxial cable.
   Use the coaxial cable that your cable company provided to connect the cable port on the cable modem to a cable wall outlet or a line splitter. Make sure that the cable is tightly connected.
   Note: If Comcast XFINITY is your cable Internet provider, Comcast XFINITY recommends connecting your cable modem directly to a cable wall outlet.

3. Connect the power adapter provided in the package to the cable modem and plug the power adapter into an electrical outlet.
   When the startup procedure is completed, the Power LED lights green.

4. Wait for the cable modem to come online.
   It takes at least 10 minutes for the cable modem to come online on the network. During this time, the LED behavior is as follows:
   • The Downstream LED lights amber when one downstream channel is locked.
   • The Downstream LED lights green when more than one downstream channel is locked.
   • The Upstream LED lights amber when one upstream channel is locked.
   • The Upstream LED lights green when more than one upstream channel is locked.
   • After the cable modem registers with your cable Internet provider, the Internet LED lights green.

5. Turn off the computer to which you intend to connect the cable modem.

6. Use the Ethernet cable provided in the package to connect the LAN port on the cable modem to an Ethernet port on the computer.

7. Turn on the computer.
   Even though an Internet connection is established, Internet service is available only after you set it up with your cable Internet provider.
   For information about how to activate your Internet service, see Activate Your Internet Service.

Activate Your Internet Service
  To activate your Internet service:

1. Visit your cable Internet provider’s website and follow the onscreen instructions to activate your Internet service.

Cable Internet Provider  / Contact Information

• * Bright House Networks

  • http://support.brighthouse.com
  • 1-866-898-9101
  • Cablevision
  • http://www.cablevision.com
  • https://install.optimum.com/JointInstall/
  • Telephone number depends on your region.
  • Note: When you attempt to contact Cablevision online, you are directed to the Optimum web page. Optimum is a brand name of Cablevision.
  • Comcast XFINITY
  • http://www.comcast.com/activate
  • http://www.XFINITY.com/internetsetup
  • http://www.XFINITY.com/internetsupport
  • 1-800-XFINITY (1-800-934-6489)
  • For more information, see Activate Your Internet Service With Comcast XFINITY on page11.
  • Cox
  • https://activation.cox.net/selfactivation/newmodem.cox
  • 1-888-556-1193
  • Mediacom
  • https://maestro.mediacomcc.com/walledgarden/page/login.jsp
  • 1-844-2SIMPLE (1-844-274-6753)
  • Time Warner Cable
  • https://www.timewarnercable.com/en/support/internet/step-by-step/modem-activation.html
  • 1-800-892-2253

Note: Your cable Internet provider’s contact information might change. You can also find the contact information in your monthly Internet service billing statement.

2.  If you are unable to activate your Internet service using the instructions on your cable Internet provider’s website, call your cable Internet provider and do the  following:
a. When asked, provide your account information and provide the cable modem’s model number, which is CM1000v2, serial number, and MAC address.
The serial number and MAC address are on the label on the cable modem, which is on the bottom of the cable modem.
b. Wait for your cable Internet provider to confirm that your cable modem is active.
c. If you do not get an Internet connection with the cable modem, ask your cable Internet provider to look for your cable modem online, and do one of the following depending on what your cable Internet provider tells you about your cable modem:
• If the cable modem is not visible, your cable Internet provider can give you instructions to verify why the cable modem does not connect with your high- speed Internet service.
• If the cable modem is visible to your cable Internet provider, reboot the cable modem. Check your online status again.

Activate Your Internet Service With Comcast XFINITY

Set up Internet service by using Comcast XFINITY’s self-activation process. If you are unable to self-activate your cable modem, call Comcast XFINITY customer service. After you complete the setup, perform a speed test.
Before you start the self-activation process, make sure to collect your account number, account phone number, and login information (your email address or user name and password).

  To activate your Internet connection with Comcast XFINITY’s self-activation process:

1. 1. Close all web browsers.

2. Launch a web browser.
   You are redirected to the XFINITY self-activation page. If you are not redirected to the XFINITY self-activation page, visit comcast.com/activate.

3. Provide your XFINITY credentials and complete the self-activation process.
   This process might take up to 15 minutes, during which the cable modem reboots a few times.

4. If you are unable to activate your cable modem using the XFINITY self-activation process, call Comcast XFINITY customer service at 1-800-XFINITY (1-800-934-6489) and do the following:
   a. When asked, provide your account information and provide the cable modem’s model number and MAC address, which are on the product label on the cable modem.
   For more information, see Product Label on page 6.
   b. Wait for Comcast XFINITY to confirm that your cable modem is active.
   c. If you do not get an Internet connection with the cable modem, ask Comcast XFINITY to look for your cable modem online, and do one of the  following depending on what Comcast XFINITY tells you about your cable modem:
   • If the cable modem is not visible, Comcast XFINITY can give you instructions to verify why the cable modem does not connect with your high-speed  Internet service.
   • If the cable modem is visible to Comcast XFINITY, reboot the cable modem. Check your online status again.

Perform a Speed Test

To determine the accurate Internet speed, visit the speed test website of your cable Internet provider, and perform a speed test.
If your actual speed is lower than your subscribed speed, contact your cable Internet provider.

Connect Your Cable Modem to a Router After Installation and Activation

During the installation and activation, you must connect the cable modem directly to a computer. After installation and activation, you can connect the cable modem to a router.

  To connect your cable modem to a router after installation and activation:

1. 1. Reboot the cable modem by unplugging the power cable from the cable modem and plugging it back in.  

   Note: Do not disconnect the cable modem from the cable outlet.
   When the startup procedure is completed, the Power LED lights green.
   Wait for the Internet LED to stop blinking and light solid green.

2. Use an Ethernet cable to connect the Ethernet port on the cable modem to the WAN or Internet port on the router.

3. Power on the router.
   Wait until the router is ready.

4. Connect a computer to the router over a WiFi connection or with an Ethernet cable to a LAN port on the router.

Manage and Monitor

After you set up the cable modem, you do not need to log in to the cable modem for normal operation. However, you can log in to the cable modem to change a very limited number of settings and monitor the cable modem. In the unlikely situation that you experience problems with the cable connection and cannot get an Internet connection, technical support might ask you to log in to the router.
This chapter contains the following sections:

• *       * Log In to the Cable Modem

  • View Cable Modem Initialization
  • View Cable Modem Status
  • View and Clear Event Logs
  • Change the admin Password
  • Reboot the Cable Modem
  • Reset the Cable Modem to Factory Default Settings
  • Change the Cable Connection Starting Frequency

Log In to the Cable Modem

After you set up the cable modem, you do not need to log in to the cable modem for normal operation.
To log in to the cable modem, you must use a web browser such as Microsoft Internet Explorer 5.0 or later, Firefox Mozilla 2.0 or later, Safari 1.4 or later, or Google Chrome 11.0 or later.

  To log in to the cable modem:

1. 1. Launch a web browser from a computer that is attached with an Ethernet cable to the cable modem or from a computer that is connected to a WiFi router that is attached with an Ethernet cable to the cable modem.

2. Enter http://192.168.100.1.
   A login window opens.

3. Enter the cable modem user name and password.
   The user name is admin. The default password is password. The user name and password are case-sensitive.
   The BASIC Home page displays.

View Cable Modem Initialization

You can track the initialization procedure of the cable modem and get details about the downstream and upstream cable channels. The time is displayed after the cable modem is initialized.
The cable modem automatically goes through the following steps in the provisioning process:

1. Scans and locks the downstream frequency and then ranges the upstream channels.
2.  Obtains a WAN IP address for the cable modem.
3. Connects to the Internet.

  To view the status of the cable modem initialization:

1. Launch a web browser from a computer that is attached with an Ethernet cable to the cable modem or from a computer that is connected to a WiFi router that is attached with an Ethernet cable to the cable modem.

2. Enter http://192.168.100.1.
   A login window opens.

3. Enter the cable modem user name and password.
   The user name is admin. The default password is password. The user name and password are case-sensitive.
   The BASIC Home page displays.

4. Select Cable Connection.

The Startup Procedure section displays the initialization progress. The Downstream Bonded Channels section displays the status of each downstream channel..

5. To see the Upstream Bonded Channels section and system time, scroll down.

View Cable Modem Status

You can view some basic information about the cable modem.
  To view cable modem status:

1. Launch a web browser from a computer that is attached with an Ethernet cable to the cable modem or from a computer that is connected to a WiFi router that is attached with an Ethernet cable to the cable modem.

2. Enter http://192.168.100.1.
   A login window opens.

3. Enter the cable modem user name and password.
   The user name is admin. The default password is password. The user name and password are case-sensitive.
   The BASIC Home page displays.

4. Select ADVANCED.

The Cable Information page displays the following:

• Hardware Version. The version of the cable modem hardware.
• Firmware Version. The version of the cable modem firmware.
• Cable Modem Serial Number. The serial number of the cable modem.
• CM Certificate. The status of the cable modem certificate. If Not installed displays as the status, contact your cable Internet provider.
• CM MAC. The MAC address of the cable modem.
  For information about using the Reboot button, see Reboot the Cable Modem on page 19.
  For information about using the Factory reset button, see Reset the Cable Modem to Factory Default Settings on page 20.

View and Clear Event Logs

Event logs capture important cable modem events.
  To view and clear the event logs:

1. Launch a web browser from a computer that is attached with an Ethernet cable to the cable modem or from a computer that is connected to a WiFi router that is attached with an Ethernet cable to the cable modem.

2. Enter http://192.168.100.1.
   A login window opens.

3. Enter the cable modem user name and password.
   The user name is admin. The default password is password. The user name and password are case-sensitive.
   The BASIC Home page displays.

4. Select ADVANCED > Administration > Event Log.

5. The Event Log page shows the following information:
   • Time. The time the event log entry was recorded.
   The correct time displays only after the cable modem successfully connects to the cable Internet provider’s network.
   • Priority. The severity of the event log entry.
   • Description. A description of the event log entry.

6. To refresh the log page, click the Refresh button.

7. To clear the log entries, click the Clear Log button.

Change the admin Password

You can change the default password that is used to log in to the cable modem with the user name admin.
  To change the password for the user name admin:

1. Launch a web browser from a computer that is attached with an Ethernet cable to the cable modem or from a computer that is connected to a WiFi router that is attached with an
   Ethernet cable to the cable modem.

2. Enter http://192.168.100.1.
   A login window opens.

3. Enter the cable modem user name and password.
   The user name is admin. The default password is password. The user name and password are case-sensitive.
   The BASIC Home page displays.

4. Select ADVANCED > Administration > Set Password.

5. Type the old password.

6. Type the new password in the Set Password field.

7. Type the new password in the Repeat New Password field.

8. Click the Apply button.
   Your change takes effect.

Reboot the Cable Modem

Rebooting the cable modem disconnects all computers from the cable modem’s local area network (LAN). After the cable modem is finished booting and reestablishes a connection with the cable Internet provider’s network, the devices reconnect to the cable modem’s LAN.
  To reboot the cable modem:

1. Launch a web browser from a computer that is attached with an Ethernet cable to the cable modem or from a computer that is connected to a WiFi router that is attached with an Ethernet cable to the cable modem.

2. Enter http://192.168.100.1.
   A login window opens.

3. Enter the cable modem user name and password.
   The user name is admin. The default password is password. The user name and password are case-sensitive.
   The BASIC Home page displays.

4. Select ADVANCED.
   The ADVANCED Home page displays the Cable Information pane.

5. Click the Reboot button.
   A confirmation message displays.

6. Click the OK button.
   The cable modem reboots.

Reset the Cable Modem to Factory Default Settings

To reset the cable modem to factory default settings, you can use either the Reset button on the back panel of the cable modem or the Factory reset software button. However, if you changed the default password to access the cable modem and lost the password, you must use the Reset button on the back panel.

After you reset the cable modem to factory default settings, the user name is admin, the password is password. The LAN IP address is always 192.168.100.1. You cannot change this LAN IP address.

Use the Reset Button on the Back Panel

CAUTION:
This process erases all settings that you configured in the cable modem.
  To reset the cable modem to factory default settings:

1. Power on the cable modem.
2. On the back of the cable modem, locate the Reset button.

3. Using a straightened paper clip, press and hold the Reset button for about seven seconds until all LEDs blink.
4. Release the Reset button. The configuration is reset to factory default settings. When the reset is complete, the cable modem reboots. This process takes about one minute.

WARNING:
To avoid the risk of corrupting the firmware, do not interrupt the reset. For example, if you are connected to the web management interface, do not close the browser, click a link, or load a new page. Do not turn off the cable modem.

Use the Factory reset Software Button

CAUTION:
This process erases all settings that you configured in the cable modem.

  To erase the settings:

1. 1. Launch a web browser from a computer that is attached with an Ethernet cable to the cable modem or from a computer that is connected to a WiFi router that is attached with an Ethernet cable to the cable modem.

2. Enter http://192.168.100.1.
   A login window opens.

3. Enter the cable modem user name and password.
   The user name is admin. The default password is password. The user name and password are case-sensitive.
   The BASIC Home page displays.

4. Select ADVANCED.
   The Cable Information pane displays.

5. Click the Factory reset button.
   A confirmation message displays.

6. Click the OK button.
   The configuration is reset to factory default settings. When the reset is complete, the cable modem reboots. This process takes about one minute.

WARNING:
To avoid the risk of corrupting the firmware, do not interrupt the reset. For example, do not close the browser, click a link, or load a new page. Do not turn off the cable modem.

Change the Cable Connection Starting Frequency

The starting frequency for the cable connection is automatically generated. For most Internet connections, you do not need to change this information.

WARNING:
Do not change the starting frequency unless your cable Internet provider instructs you to do so. Changing the starting frequency incorrectly causes serious connection and Internet problems.

  To change the starting frequency:

1. 1. Launch a web browser from a computer that is attached with an Ethernet cable to the cable modem or from a computer that is connected to a WiFi router that is attached with an Ethernet cable to the cable modem.

2. Enter http://192.168.100.1.
   A login window opens.

3. Enter the cable modem user name and password.
   The user name is admin. The default password is password. The user name and password are case-sensitive.
   The BASIC Home page displays.

4. Select Cable Connection.

5. In the Starting Frequency field, type a number as instructed by your cable Internet provider.

WARNING:
Do not change the starting frequency unless your cable Internet provider instructs you to do so. Changing the starting frequency incorrectly causes serious connection and Internet problems.

6. Click the Apply button.
Your change takes effect.

Troubleshooting

This chapter provides information about troubleshooting your cable modem.
The chapter includes the following sections:

• Use LEDs to Troubleshoot
• Cannot Log In to the Cable Modem
• Troubleshoot the Cable Internet Connection

Note: NETGEAR provides helpful articles and documentation at support.netgear.com.

Use LEDs to Troubleshoot

The following table provides help when you are using the LEDs for troubleshooting.

Cannot Log In to the Cable Modem

If you cannot access the cable modem from computer that is connected to the cable modem or to a router that is connected to the cable modem, check the following:

• If your computer is connected to the cable modem with an Ethernet cable, check the connection.

• Make sure that your computer’s IP address is on the same subnet as the cable modem. The IP address of your computer must be in the range of 192.168.100.2 to 192.168.100.254.

• Make sure that Java, JavaScript, or ActiveX is enabled in your browser. If you are using Internet Explorer, click the Refresh button to make sure that the Java applet is loaded.

• Try quitting the browser and launching it again.

• Make sure that you are using the correct login information. The cable modem user name admin is lowercase (Caps Lock is off). The default password is password.
  If the cable modem does not save changes you made, do the following:

• When entering configuration settings, be sure to click the Apply button before moving to another page, or your changes are lost.

• Click the Refresh or Reload button in the web browser. The changes occurred, but the web browser might be caching the old configuration.

Troubleshoot the Cable Internet Connection

If your cable modem cannot access the Internet but the Internet LED lights green, make sure that the cable MAC address or device MAC address of your cable modem is registered with your cable Internet provider (see Install and Activate Your Cable Modem on page 8).

Technical Specifications

The following table lists the technical specifications for the cable modem.

SPECIFICATION

Product Name

|

High Speed Cable Modem

---|---

Model Number

|

CM1000v2

Speed

|

Up to 1 Gbps

Certification

|

Certified by all major cable Internet providers

IPv4 and IPv6 Support

|

Supports the assignment of IPv4 and IPv6 addresses by cable Internet providers

Hardware Setup

|

Provides a Gigabit Ethernet port for fast access and downloads

Internet Setup

|

Provides a connection to high-speed cable Internet

Installation and Activation

|

Provides step-by-step instructions on how to install and activate the cable modem, including connecting it directly to a computer during the installation process

Contact Information

|

Includes contact information for various cable Internet providers

Speed Test

|

Provides instructions on how to perform a speed test to determine the accurate internet speed

Router Connection

|

Provides information on how to connect the cable modem to a router after installation and activation

FAQS

How long does it take for the cable modem to come online after installation?

It takes at least 10 minutes for the cable modem to come online on the network.

What does the front panel of the cable modem display?

The front panel of the cable modem displays status LEDs that can be used to verify the status and connections.

What is the maximum speed supported by the CM1000v2 cable modem?

The CM1000v2 cable modem supports speeds up to 1 Gbps.

How do I connect my cable modem to a router after installation and activation?

After installation and activation, you can connect the cable modem to a router using an Ethernet cable.

What should I do if I am unable to activate my Internet service using the instructions on my cable Internet provider’s website?

If you are unable to activate your Internet service using the instructions on your cable Internet provider’s website, call your cable Internet provider and provide your account information and the cable modem’s model number, serial number, and MAC address.

How do I activate my Internet service with Comcast XFINITY?

To activate your Internet connection with Comcast XFINITY’s self-activation process, close all web browsers and launch a web browser. You will be redirected to the XFINITY self-activation page where you can provide your XFINITY credentials and complete the self-activation process.

What information should be collected before contacting the cable Internet provider?

Before contacting the cable Internet provider, collect your cable account number, account phone number, and login information (your email address or user name and password).

High Speed Cable Modem CM1000v2 User Manual – Optimized PDF
High-Speed Cable Modem CM1000v2 User Manual – Original PDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>