MAXIM 86210 Caldera LED Flush Mount Instruction Manual

MAXIM 86210 Caldera LED Flush Mount Instruction Manual

Item/Model Number: 86210
Caldera 120-277V LED Flush Mount

Lamping I Ampoule:1xLED 12W(Included)

Please consult a qualified electrician prior to install
Made in China

Before Getting Started

• Read the instructions carefully prior to assembling  the product.
• When you open the package with a sharp tool like a  box knife, be careful not to damage the  components inside.
• Carefully remove all packaging materials and retain  for future use.
• Keep all hardware parts and packaging out of  reach of children.
• Choose a clean, level, spacious assembly area. Avoid  hard surfaces that may damage the product.
• Ensure that you have all required contents for  complete assembly.
• Take care when lifting. Assemble the product in close  proximity to where you intend to install it.
• Do not over tighten the screws and bolts as this may damage the threads.
• Do not let children play with this product.
• Risk of suffocation!
• Keep packaging materials away from children.

Lamp Care Instructions

• Carefully read through the instruction sheet before assembly and using the product.
• Caution there is a risk of shock!
• Disconnect from power source before assembling or cleaning.
• Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
• Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
• Check the product cord to be sure is free torn or frayed.
• WARNING: Wires must to be connected to low voltage driver and should not be connected directly to live wire or a short may occur.
• WET LOCATION: For outdoor use, caulk around fixture with silicone sealant to prevent water intrusion.

Cleaning & Maintenance

• On polished finishes, often using talc powder can reduce the appearance of fingerprints and other smudges.
• For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
• Clean with soft cloth and a mild detergent. Do not use abrasive or harsh cleaners.
• Periodically (every 90-180 days) make sure that the screws are fully tightened.
• Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.

PARTS

Before getting,started,ensure the package contains the following components:

This fixture is equipped with an LED driver, please refer to the Wiring Diagram for more details

For outdoor use, caulk around fixture with silicone sealant to prevent water intrusion. Leave a gap at the bottom to allow moisture to escape.

WIRING DIAGRAM

DIMMER COMPATIBILITY

MUST be installed by an experienced professional
CRITICAL KNOWLEDGE of electronic lighting systems required

IMPROPER WIRING and/or INCORRECT DIMMER use can cause CATASTROPHIC DAMAGE!
THIS FIXTURE MUST BE INSTALLED with a COMPATIBLE DIMMER SWITCH
DO NOT CUT FACTORY-MADE CONNECTIONS.

VERIFIED LIST OF TESTED DIMMERS
Lutron Diva DVCL-153P
Lutron Diva DVELV-300P
Lutron Diva Caseta PD-6WCL
Lutron Maestro MACL-153M
DEAKO-Smart Dimmer
DEAKO-Single Dimmer
LEVITON 6672-L
LEVITON DSL06

GENERAL COMPATIBILITY
TRIAC / FORWARD PHASE
ELV / REVERSE PHASE
ONLY at 120VAC
Due to inrush current, wattage should  not exceeed 150W on a 600W dimmer

IMPORTANT!
If the control is not paired properly to LED fixtures, irreparable damage may occur.
If the dimmer you are using is not listed here, consult a lighting professional or view our Dimming Compatibility Chart online:
https://www.maximlighting.com/led-dimmer

MUST be installed by an experienced professional
CRITICAL KNOWLEDGE of electronic lighting systems required
0 2024 MAXIN LIGHTING

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>