Verizon FiOS TV P265v3 Remote Control User Menual

Thank you for subscribing to FiOS TV Service. This User Manual will show you how to program and operate your new FiOS TV Remote Control (Model P265v3).

Quick Setup Guide-Verizon FiOS remote

The following steps will guide you to quickly set-up your Verizon FiOS TV remote for your TV.

1. Turn on your TV and the FiOS STB. Make sure you can see live television.

2. Locate the 3-digit code for your TV brand in the list to the right and circle the correct code.

If your TV brand is not listed, codes for additional TV brands are listed at the back of this manual.
3. Once you locate the brand code, press and hold the < OK > and (0) keys together. The RED LED on the remote control will blink twice and then stay on.

4. Enter the 3-digit TV code for your TV brand using the number pad. The RED LED will blink twice and then stay on.

5. Press and release the < CH +> button repeatedly until the TV turns off. You can also “back up” by pressing the < CH -> button.

*Please note – some TVs may respond slower than others. Please allow 1 second between button presses.

6. Test that remote control is programmed for your TV

• Turn the TV on using the ( TV)   key.
• Press < VOL +> and < VOL -> to make sure that the volume keys work.
• Press (Mute) and (A/V) keys.
• If any of these keys do not work as expected, press and hold that key. Release it as soon as it works.

7. If all these keys work, press to save this TV brand code programming. The RED LED will blink 3 times and then turn off.

Your Remote Control is now programmed for your TV!

Acronyms

1. RC = Remote Control
2. STB = FiOS TV Set Top Box
3. VOL = Volume
4. CH+ = Channel Up
5. CH- = Channel Down

FiOS TV Remote Control Codes for Major TV Brands

8) Troubleshooting

• If the ( TV) button does not work correctly, make sure the TV is on and go back to Step 1 of the Quick Start Guide. You can also try the Code Search Method below.
• If the < VOL>, < Mute>, or < A/V> buttons do not work correctly, please refer to the Key Fix Feature.
• If you think you made a mistake with programming your remote, you can always press the < Exit> button and start over. The RED LED will turn off if the RC is not in programming mode.
• If you don’t press any buttons for 60 seconds, the remote control will automatically exit programming mode.
• Note, if you press the < CH> button many times and the lights on the remote control all flash rapidly, the programming attempt was not successful.
• If the Brand Search method does not work, please try the Code Search Method below, which scans the complete database for all TV codes.
• If you are still having problems programming the remote, please refer to our website at www.verizon.com/fiostvhelp

Code Search Method to Program the RC

(This method could take up to 12 minutes)

1. Turn on your TV and the FiOS STB.

2. Make sure you can see live television.

3. Press and hold the < OK> and  buttons together, then release both.
   • The RED LED will blink twice and then stay on.

4. Press and hold down the   button.

5. The Remote Control will try a new TV code every second, and the RED LED will blink each time a new code is sent.

6. When the TV turns off, stop pressing the play button right away.
   • Please note – some TVs may respond slower than others.

7. You can press the < CH +> or < CH -> buttons to go forward or back one TV code at a time.

8. Test that the remote control is programmed for your TV.
   a. Turn the TV on using the ( TV) key.
   b. Press < VOL +> and < VOL -> to make sure that the volume keys work.
   c. Press (Mute) and (A/V)  .
   d. If any of these keys do not work as expected, press and hold that key. Release it as soon as it works.

9. If these keys all work, press < OK> to save this TV brand code programming. The RED LED will blink 3 times and then turn off.

Your Remote Control is now programmed for your TV!

10. Troubleshooting

• If the ( TV) button does not work correctly, make sure the TV is on and go back to Step 1 of the Code Search Method.
• If the < VOL>, < Mute>, or < A/V> buttons do not work correctly, please refer to the Key Fix Feature.
• If you think you made a mistake with programming your remote, you can always press the button and start over. The RED LED will turn off if the RC is not in programming mode.
• Please Note, the Code Search Method could take up to 12 minutes, as it must go through over 500 codes. The most common codes are tried first, but you may need to press and hold for a while to locate the correct code.
• Once you have tried all the TV codes in the remote control, the RED LED and the backlit buttons will flash 4 times rapidly, the RED LED will turn off and the remote will exit the programming mode.
• If you are still having problems programming the remote, please refer to our website at www.verizon.com/fiostvhelp

OPTIONAL FEATURES