MEE audio MX PRO Modular Musician’s In-Ear Monitors User Manual

QUICKSTART GUIDE

PERFECT ON AND OFF THE STAGE

MX*PRO
Modular Musician’s In-Ear Monitors
models: MX1PRO, MX2PRO, MX3PRO, MX4PRO
pro.meeaudio.com/MXPRO

HOW TO WEAR FIT VIDEO
Before first use, watch our fit video by visiting pro.meeaudio.com/PROhelp or scanning the QR code:

IMPORTANT
Please read this quickstart guide in its entirety to ensure best fit and sound

PACKAGE CONTENTS

1. MX PRO In-Ear Monitors
2. Protective carrying case
3. ¼” adapter
4. Silicone eartips (4 pairs)
5. Comply™ memory foam eartips
6. Stereo audio cable
7. Stereo headset cable

STEP 1 – SELECTING EARTIPS

Multiple sets of ear tips are included to ensure you get the best fit with your headphones.
The correct ear tips for your ear will allow the earpieces to fit flush, reduce outside noise, and provide a good bass response.
Install ear tips as shown. Make sure ear tips are installed securely before use.

COMPLY MEMORY FOAM EAR TIPS

FOR REPLACEMENT TIPS, GO TO COMPLYFOAM.COM. THE COMPLY™ EARTIPS INCLUDED WITH THE MX PRO ARE THE T-200 MEDIUM.

STEP 2 – WEARING THE MX PRO

Identify the right and left earpieces.
Straighten the memory wire and put each earpiece in the corresponding ear.
Adjust each earpiece until it fits flush in your ear and the ear tip seals the ear canal.

Holding the earpiece in place, bend the memory wire around your ear to achieve a conforming fit.
While pulling the cable gently with one hand, squeeze the memory wire behind your ear with the other hand until the fit is tight and secure.

Tighten the sliding cable cinch for the most secure fit.
Use the shirt clip to control cable movement.

STEP 3 – REPLACING THE CABLE

The MX PRO includes two detachable, interchangeable cables – an audio-only cable and a headset cable with built-in microphone and remote.
Additional cable types, replacement parts, and other accessories are available at pro.meeaudio.com.
To detach the cable, grasp the earpiece and cable connector firmly, and pull straight apart without twisting.

Attach new cable by lining up the notches on the connectors with the grooves in the earpieces as shown. Push connectors in until they fit securely.
Make sure to attach the cable connector marked “R” to the right earpiece and the connector marked “L” to the left earpiece.

MICROPHONE & REMOTE USE

CUSTOMIZE YOUR MX PRO

The MX PRO in-ear monitors can be upgraded with custom-fit eartips, engraved artwork faceplates, additional cable types, wireless adapters and more.
Visit meeaudio.com/MXcustom to view our full assortment of upgrades and customizations
Replacement Parts
Replacement parts and accessories are available from your local MEE Professional dealer or online at pro.meeaudio.com

ADDITIONAL INFORMATION

FOR ADDITIONAL SUPPORT
View FAQs and troubleshooting guides at pro.meeaudio.com/help
Contact us at support@meeaudio.com

WARRANTY

The MX PRO is covered by a 1-year manufacturer warranty. For more information, visit pro.meeaudio.com/warranty.

DISPOSAL AND RECYCLING
Dispose of this product in accordance with all local laws and regulations. Because this product contains electronic components, it must be disposed of separately from household waste. Contact local authorities to learn about disposal and recycling options.

ADDITIONAL INFORMATION

WARNING
Using headphones at high to moderate volumes for extended periods of time will result in permanent hearing damage. It is advised you keep volume levels moderate to low at all times for your safety. Do not use while driving a car, cycling, operating machinery, or performing other activities that require hearing surrounding sounds.
Keep the device and packaging out of reach of children.
This device is designed and manufactured to operate within its defined design limits. Misuse may result in electric shock or fire. Read and follow these instructions carefully.

• If submersed in water, do not turn the device on until completely dried. Note: liquid submersion voids the warranty.
• There are no user replaceable/reparable parts in the headset. Disassembling it will void your warranty.
• Only use attachments/accessories specified by the manufacturer

Changes or modifications to this unit not expressly approved by MEE audio could void the user’s authority to operate the equipment.
MX PRO Modular Musician’s In-Ear Monitors

HAVE A QUESTION?
Email support@MEEaudio.com
MEE audio and its logo are registered trademarks of S2E, Inc.
MEE Professional and its logo are trademarks of S2E, Inc. All rights reserved.
Siri® is a registered trademark of Apple Inc.
Google Assistant™ is a registered trademark of Google Inc.
© 2017 Hearing Components. Comply is a trademark of Hearing Components.

QUESTIONS?
WE’RE HERE TO HELP!
Phone Support: 626-965-1008
Monday ~ Friday 9:00 am to 5:00 pm PST
Email Support : support@MEEaudio.com
All emails are responded to within 2 business days

LIFETIME REPLACEMENT
Things don’t always go according to plan in the real world. Whether your headphones get crushed, shredded, fried, misplaced, or carried off by army ants, we’ve got you covered. Just tell us what happened and we’ll give you a new pair at half price, no questions asked (note: we reserve the right to ask for more of a great story).
Visit pro.meeaudio.com/LRP for more information or to request a replacement.

MEE audio MX PRO Modular Musician’s In-Ear Monitors User Manual – Download [optimized]
MEE audio MX PRO Modular Musician’s In-Ear Monitors User Manual – Download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>