INSIGNIA NS-PUV308 USB 3.0 to VGA Adapter Quick Start Guide

Quick Start Guide

INSIGNIA NS-PUV308 USB 3.0 to VGA Adapter

PACKAGE CONTENTS

• USB 3.0 to VGA Adapter
• Quick Setup Guide

SYSTEM REQUIREMENTS

• Windows 10, Windows® 8.1, Windows® 8, Windows® 7,
• Mac OS X 10.6 and later versions

Note: A USB 3.0 port is recommended. The maximum resolution for a USB 2.0 port is 2048 × 1152.

FEATURES

• Connects your desktop or laptop computer to a VGA display
• Adds a VGA port to your computer
• Connects an extra monitor to extend your display
• Supports up to 1080p resolution (with USB 3.0 port)
• Works with legacy USB ports (maximum resolution 2048 × 1152)

Top view

INSTALLING THE DRIVERS

Windows 10/Windows 8.1/Windows 8/Windows 7

1. Connect the adapter to a USB port on your computer. Your computer attempts to install the drivers automatically.
2. If the drivers fail to download automatically, open your web browser and go to www.insigniaproducts.com.
3. Type NS-PUV308 into the search box, then press ENTER.
4. Click the Support & Downloads tab.
5. Under Drivers, Firmware, and Software, click File(s) next to “Windows.”
6. Unzip the driver package, then open Insignia_USB3.0_To_VGA_Adapter_Windows_Driver.exe.
7. Follow the on-screen instructions to install the driver, then click Finish when the installation is complete.

8. Restart your computer to configure the update.

Mac OS X 10.6 or later

1. Open your web browser and go to www.insigniaproducts.com.
2. Type NS-PUV308 into the search box, then press ENTER.
3. Click the Support & Downloads tab.
4. Under Drivers, Firmware, and Software, click File(s) next to “Mac OS X.”
5. Unzip the driver package, then open Insignia_USB3.0_To_VGA_Adapter_Windows_Driver.dmg.
6. Follow the on-screen instructions to install the driver, then click Finish when the installation is complete.

7. Restart your computer to configure the update.

CONNECTING THE ADAPTER

Connect the adapter to a USB port on your computer, then connect a VGA cable (not included) from the adapter to your display.

ADJUSTING YOUR SCREEN RESOLUTION AND DISPLAYS

1. Accessing your display settings

Windows 10

1. Use the adapter to connect the display to your computer. See “ Connecting the adapter. ”
2. Open Settings > System > Display > Advanced display settings.

Windows 8.1/Windows 8

1. Use the adapter to connect the display to your computer. See “ Connecting the adapter. ”
2. Open PC settings > PC and devices > Display.

Windows 7

1. Use the adapter to connect the display to your computer. See “ Connecting the adapter. ”
2. Open Control Panel.
3. If viewing by icons, click Display, then click Adjust resolution in the menu on the left.
   OR
   If viewing by category, under Appearance and Personalization, click Adjust screen resolution.

Mac OS X 10.6 or later

1. Use the adapter to connect the display to your computer. See “ Connecting the adapter. “
2. Open Apple menu >System Preferences>Displays.

2. Extending or duplicating your displays

Windows 10/Windows 8.1/Windows 8/Windows 7

1. Use the Multiple Displays drop-down to select Duplicate these displays or Extend these displays.
2. Click Apply to view the change.
3. Click Keep changes to save your settings or click Revert to go back to your previous settings.

Mac OS X 10.6 or later

1. Click the Arrangement tab.
2. Select Mirror Displays to duplicate the display, or deselect it to extend the display.

3. Changing your screen resolution

Windows 10/Windows 8.1/Windows 8/Windows 7

1. Select the display you want to adjust.
2. Use the Resolution drop-down menu (Windows 10/ Windows 7) or slider (Windows 8.1/Windows 8) to select the resolution you want.
3. Click Apply.
4. Click Keep Changes to save your settings or click Revert to go back to your previous settings.

Mac OS X 10.6 or later

1. Press the Option key while you click Scaled to see additional resolutions for the second display.
2. Select a scaled resolution option for the second display.

TROUBLESHOOTING

My computer does not detect the adapter

• Make sure that all of the cables are connected securely and correctly.
• Make sure that the cables are not damaged.
• Try connecting to another USB port.
• Use a USB 3.0 port if resolution is poor.
• Make sure that the driver is installed.
• Make sure that you are using the proper display settings on your computer.

The driver did not install on my system

• Make sure that the adapter and USB 3.0 cable are not damaged.
• To check the driver installation, go to ( Windows 10 OS build: 14393 and up) Control Panel >Device Manager>Display adapters. Look for “Insignia USB3.0 To VGA Adapter”. Otherwise, please go to Control Panel >Device Manager>Universal Serial Bus Controllers. Look for “Insignia USB3.0 To VGA Adapter”.
• Install the driver again.
• Temporarily shut down your firewall in case your anti-virus is preventing the installation of the driver.
• Make sure that your system is compatible with the driver. See System Requirements for more information.
• If no video output on Displays Please follow “ADJUSTING YOUR SCREEN RESOLUTION AND DISPLAYS” to change display setting and screen resolution.

LEGAL NOTICES

FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

ICES-003
This Class B digital apparatus complies with Canadian
ICES-003;

ONE-YEAR LIMITED WARRANTY

Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA:

For customer service, call 877-467-4289 (U.S. and
Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com

INSIGNIA is a trademark of Best Buy and its affiliated companies.
Distributed by Best Buy Purchasing, LLC
©2017 Best Buy. All rights reserved.
Made in China

Read More About This Manual & Download PDF:

INSIGNIA NS-PUV308 USB 3.0 to VGA Adapter Quick Start Guide – Download

Questions about your Manual? Post in the comments!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>