Bissell 5288 Series Flip-Ease Dry to Wet User Guide

Thanks for buying a BISSELL Hard Floor Cleaner

We’re glad you purchased a BISSELL Flip-EaseTM. Everything we know about floor care went into the design and construction of this complete, convenient cleaning system. Your BISSELL Flip-Ease is well made, and we back it with a limited one-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance. My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and ervice of high-quality homecare products like your BISSELL Flip-Ease.
Thanks again, from all of us at BISSELL.

Mark J. Bissell
President and Chief Executive Officer

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should be observed, including the following:
READ ALL INSTRUCTIONS BEFORE USING YOUR BISSELL FLIP-EASE CORDLESS HARD FLOOR CLEANER.
WARNING – To reduce the risk of fire, electric shock, or injury:
■ Store indoors.
■ Do not expose to rain.
■Do not immerse.
■ Do not handle with wet hands.
■ Do not use Flip-Ease if it has been dropped, damaged, left outdoors, or dropped into water. Has it repaired at an Authorized Service Centre?
■ Do not use with a damaged cord or plug on the charger.
■ Do not unplug the charger by pulling on the cord.
■ Do not damage the charger cord. Never carry or pull the charger unit by the cord, use cord as a handle, close door on cord, or pull cord around sharp edges or corners. Keep the cord away from heated surfaces.
■ Do not use an extension cord. The charger should plug directly into an electrical outlet.
■  Do not put any object into appliance openings, use with blocked opening, or restrict airflow.
■  Do not expose hair, loose clothing, fingers, or body parts to openings or moving parts.
■ Do not pick up hot, burning, or smoking objects such as cigarettes, matches, or hot ashes.
■ Do not pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use them in the presence of explosive liquids or vapor.
■ Do not use appliances in an enclosed space filled with vapors given off by oil base paint, paint thinner, some moth-proofing substances, flammable dust, or other explosive or toxic vapors.
■ Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, gasoline, etc.)
■ Do not allow it to be used as a toy. Close attention is necessary when used by or near children.
■ Do not use for any purpose other than described in this User’s Guide.
■ Use only manufacturer’s recommended attachments – use of attachments not provided or sold by BISSELL may cause fire, electric shock or injury.
■ Use only cleaning products formulated or recommended by BISSELL for this appliance.
■ Use only the charger supplied by BISSELL (packaged with your appliance) to recharge your Flip-Ease.
■  Use charger unit only in the standard electrical outlet (120v–60 Hz).
■ Use the charger in a dry location only.
■ Keep openings free of dust, lint, hair, etc.
■ Unplug the charger unit from the outlet before maintenance or cleaning.
■ Unplug by grasping the plug, not the cord.
■ Be extra careful when cleaning stairs.
■ Turn off all controls when finished cleaning.
■ Do not charge the unit outdoors. Your Flip-Ease contains rechargeable nickel-cadmium batteries. Do not incinerate batteries as they can explode when exposed to high temperatures. Battery cell leaks can occur under extreme conditions. If battery cell liquid comes in contact with the skin:
■ Wash immediately with soap and water, then neutralize with a mild acid such as vinegar or lemon juice.
■ If battery cell liquid gets into the eyes: Flush immediately with clean water for a minimum of 10 minutes.
■ Seek medical attention.

SAVE THESE INSTRUCTIONS. THIS MODEL IS FOR HOUSEHOLD USE ONLY.

Product View

Assembling your Flip-Ease

assembling your new flip-Ease is a 3 step process, requiring no tools.
1. Insert foot into the body of the unit until you hear a click.
2. Place the Solution Tube onto the spray connector. 3. Insert the handle into the body of the unit. Turn the handle until the key in the handle falls into position until you hear a “click”.

Charging
Note : the unit will come partially charged. charge completely before using 12 hours or overnight.
The average run time for Dry Vacuuming is 12 minutes.
A. To charge, place the charger plug into the Charging Port on the side of the unit. Make sure it is in securely and the charge indicator light is illuminated. Make sure the power switch is in the “off” position.

Filling the Clean Tank
1. Remove tank from the unit.
2. Unscrew the black cap on the bottom of the solution tank and remove the insert.
3. Fill with Tap Water to the full line and fill the remainder with the BISSELL formula. Replace the cap and insert assembly. Place the full tank back into the unit.

Tip : You will only utilize a battery charge while dry vacuuming. For wet mopping, the batteries are not used, extending usage time.
Tip : Gently push the tank into place. If you see air bubbles in the tank, it is seated properly.

How to use your Flip-Ease

Dry Vac
1. Attach the Gentle CleanTM MicroFiber pad onto the base of the unit. Begin by attaching the pad onto the Velcro on one side of the unit,  wrapping it under the foot, and attaching it on the other side
Tip : If the microfiber covers the vacuum suction path, the unit will not suction.
2. Turn the unit on.
3. With the Dry Vac side of the unit facing forward begin cleaning. You will see dry dirt, crumbs debris being collected in the Dirty Tank.
4. Check the filter frequently. If you see hair and fuzzy debris collecting on the filter, remove the dirty tank and dirty tank lid to clean the filter.
To clean the filter, gently tap it on the edge of the trash can, brushing off anything that may be sticking to the filter. The filter can also be rinsed with warm water. Let air dry before inserting back into the unit.
Tip : The MicroFiber pad should be placed in the areas directed. Covering the vacuum suction path will stop all suction.

Switching from Dry Vac to Wet Mop
1. To change from dry vacuuming to wet cleaning simply flip the unit around!
Tip : When the trigger is squeezed the vacuum suction will stop; extending battery life.

Wet Mop
1. By squeezing the trigger, you will turn off the vacuum suction.
2. Water and Solution will flow to the 2 spray tips on the Wet Mop side. Gently mop the floor with the Gentle CleanTM MicroFiber pad. Depressing the trigger will dispense water and solution based on your cleaning job.  Sticky, dirty areas may require more water and solution. The floor will need to air dry for 3-5 minutes.
Tip : You do not have to empty the Dirty Tank before wet mopping.

Cleaning the Gentle CleanTM Microfiber Pad
1. After Wet Mopping, remove the MicroFiber Pad to launder or wash.
To wash, simply toss in the wash, air dry, and reuse. No need to buy disposable clothes every time you use your Flip-Ease!

Maintenance and Care

Storing and Charging your Flip-Ease
your flip-Ease can be stored Ready-to-Use, by leaving water and formula in the clean tank. be sure to remove the microfiber pad to clean.
1. To charge while storing, place the charger plug into the charging port on the side of the unit. Make sure it is securely connected and the charger indicator light is illuminated.

Battery Removal And Disposal

1. Important: Unplug charger.

2. Remove tanks (clean and dirty) and discard.

3. Remove screws (6) holding Product Housing together (see diagram).

4. Use a screwdriver to score the Rating Label on side of the unit.

5. Separate Housings and locate Battery Pack in the bottom/center of the unit.

6. Remove wires from the Battery Pack.

7. Keep Battery Pack together – DO NOT separate individual batteries. For specific disposal instructions of batteries, please contact:
   RBRC (Rechargeable Battery Recycling Corporation)
   1-800-822-8837.

8. Discard the remainder of the product.

WARNING : This product contains a rechargeable nickel-cadmium battery (sometimes referred to as a “ni-cad” battery) pack. the average life of a ni- cad battery is 5-7 years, depending on the frequency of use. according to federal regulations, proper removal and disposal of ni-cad batteries are required.

Troubleshooting

WARNING : To reduce the risk of electric shock, turn the power off and disconnect charger from the electrical outlet before performing  maintenance or troubleshooting.

Problems

|

possible causes

---|---
1. No suction or unit will not turn on| 1. Unit is not charged
2. No or low suction| 2. Batteries are run down  Filter Clogged  Dirty Tank not properly  installed   MicroFiber pad covering suction path  Clogged suction path  Foot not properly installed
3 No Spray| 3. Clean Tank is empty  Clean Tank is not inserted properly Handle is  not properly inserted  Solution tube not connected to the foot

other maintenance or service not included above should be performed by an authorized service representative.
thank you for selecting a Bissell product.
If you should happen to need assistance during assembly or operations, call 1-800-263-2535
please do not return this product to the store
for any questions or concerns, Bissell is happy to be of service. contact us directly at 1-800-263-2535.

BISSELL Consumer Services

For information about repairs or replacement parts, or questions about your warranty, call: Bissell consumer Services
1-800-263-2535
Monday – Friday 8 a.m. — 10 p.m. EST
Saturday 9 a.m. — 8 p.m. EST
Or write: BISSELL Canada Corporation Box 1003
Niagara Falls, ON L2E 6W2
ATTN: Consumer Services
Or visit the BISSELL website – www.bissell.ca
When contacting BISSELL, have the model number of cleaners available.
Please record your Model Number:
Please record your Purchase Date:
NOTE : please keep your original sales receipt. It provides proof of date of purchase in the event of a warranty claim. See Warranty on page 12 for details.

Replacement parts – BISSELL Flip-EaseTM Hard Floor Cleaner

Replacement parts are available through Bissell consumer Services, an authorized Bissell Service center, or by visiting our website. to locate an authorized Bissell Service center or to place an order using Visa or MasterCard, call
Bissell consumer Services
1-800-263-2535
Monday – Friday
8 a.m. — 10 p.m. EST
Saturday 9 a.m. — 8 p.m. EST
or visit our website – www.bissell.ca

below is a list of common replacement parts. While not all of these parts may have come with your specific model, they are available for purchase if desired. please note, all attachments may not store onboard your vacuum.

Item

| part no.|

part name

---|---|---
1| 203-6917| Handle Assembly
2| 203-6918| Solution Tank (w/  cap & insert)
3| 203-6919| Solution Tank cap & insert
4| 203-6920| Collection Tank
5| 203-6922| Collection Tank Lid
6| 203-6924| Filter
7| 203-6912| Pad
8| 203-6926| Charger
9| 482C| Wood Floor Solutions
10| 484C| Hard Floor Solutions

Warranty

If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by e-mail, telephone, or regular mail as described below.
limited one year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product, BISSELL Canada Corporation will repair or replace (with new or remanufactured components or products), at BISSELL’s option, free of charge from the date of purchase by the original purchaser, for one year any defective or malfunctioning part.
See information below on “If your BISSELL product should require service”.
This warranty applies to products used for personal, and not commercial or rental service. This warranty does not apply to routine maintenance components such as belts or brushes. Damage or malfunction caused by negligence, abuse, or use not in accordance with the  User’s Guide is not covered.
If your Bissell product should require service:
Call BISSELL Consumer Services at the number listed below or visit the BISSELL website — www.bissell.ca to locate a BISSELL Authorized Service Centre in your area. If there are no authorized BISSELL Service Centres in your area, a BISSELL Representative at canada.custhelp@bissell.ca or at the phone number below will issue you a Return Authorization Number and a pre-paid mailing label to return the unit to BISSELL for warranty repair. The machine should be returned with a photocopy of your proof of purchase. (Your dated sales receipt is your warranty — do not send original.) If you need information about repairs or replacement parts, or if you have questions about your warranty, contact Bissell consumer Services.
E-mail: canada.custhelp@bissell.ca
or call: BISSELL Consumer Services
1-800-263-2535
Monday – Friday 8 a.m. – 10 p.m. ET
Saturday 9 a.m. – 8 p.m. ET
or write:
BISSELL Canada Corporation
ATTN: Consumer Services
Box 1003,
Niagara Falls, ON L2E 6W2

BISSELL CANADA CORPORATION IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE ASSOCIATED WITH THE USE OF  THIS PRODUCT. BISSELL’S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.
*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH  MAY ARISE BY OPERATION OF LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,  ARE LIMITED TO THE ONE YEAR DURATION FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.

©2006 BISSELL Homecare, Inc
BISSELL Canada Corporation
Niagara Falls, ON L2E 6S5
All rights reserved. Printed in Korea
Part Number 603-6919 Rev 6/06
Visit our website at: www.bissell.ca

Bissell 5288 Series Flip-Ease Dry to Wet User Guide – Download [optimized]
Bissell 5288 Series Flip-Ease Dry to Wet User Guide – Download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>