Bissell 59G4 Series Easy Vac Compact User Guide

Thanks for buying a BISSELL Easy Vac Compact Bagless Canister Vacuum
We’re glad you purchased a BISSELL Easy Vac Compact bagless canister vacuum. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your BISSELL canister vacuum is well made, and we back it with a limited one-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance. My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high-quality homecare products like your BISSELL canister vacuum.
Thanks again, from all of us at BISSELL.

Mark J. Bissell
President and Chief Executive Officer

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should be observed, including the following:

READ ALL INSTRUCTIONS BEFORE USING YOUR CANISTER VACUUM.
Always connect to a polarized outlet (the left slot is wider than the right). Unplug from outlet when not in use and before conducting maintenance.
WARNING : To reduce the risk of fire, electric shock, or injury:
■ Do not leave the cleaner when it is plugged in.
■ Unplug from outlet when not in use and before servicing.
■ Do not use with damaged cord or plug.
■ To unplug the grasp plug, not the cord.
■ Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners, run cleaner over the cord, or expose cord to heated surfaces.
■ Hold the plug when rewinding the cord onto the reel. Do not allow the plug to whip when rewinding.
■ Do not use cleaner if it has been dropped, damaged, left outdoors, or dropped into water. Has it repaired at an Authorized Service Center?
■ Do not allow children to use it as a toy.
■ Do not use it outdoors or on wet surfaces.
■ Do not handle cleaner or plug with wet hands.
■ Do not put any object into openings, use with blocked opening, or restrict airflow.
■ Do not use without filters in place.
■ Do not allow hair, loose clothing, fingers, or body parts to get near openings or floor brush in the appliance.
■ Do not pick up hot coals, cigarette butts, matches, or any hot, smoking, or burning objects.
■ Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc.
■ Do not pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use them in the presence of explosive liquids or vapor.
■ Do not unplug by pulling on the cord.
■ Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, etc.).
■ Do not use in an enclosed space filled with vapors given off by oil base paint, paint thinner, some moth-proofing substances, flammable dust, or other explosive or toxic vapors.
■ Do not use for any purpose other than described in this User’s Guide.
■ Always turn off this appliance before connecting or disconnecting the vacuum hose.
■ Use only the manufacturer’s recommended attachments.
■ Use only on dry, indoor surfaces.
■ Keep openings free of dust, lint, hair, etc.
■ Keep appliance on a level surface.
■ Turn off all controls before plugging or unplugging the cleaner.
■ Be extra careful when cleaning stairs.
■ Close attention is necessary when used by or near children.
SAVE THESE INSTRUCTIONS FOR FUTURE USE THIS APPLIANCE HAS A POLARIZED PLUG.
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not change the plugin anyway.
This model is for household use only.

Product view

CAUTION : Do not plug in your vacuum until you are familiar with all instructions and operating procedures.

Assembly

1. Connect a hose to the vacuum by inserting a hose connector on the end of the hose into the suction inlet. Make sure the hose is positioned so the tabs on the hose connector line up with the notches on the suction inlet. Once inserted into the suction inlet, turn counter-clockwise to lock it into place.
2. Attach extension wands section together by inserting into one another and twisting slightly to tighten.
3. Connect the hose handle to the end of the extension wand and twist slightly to tighten.
4. Connect the floor nozzle to the end of the extension wand and twist slightly to tighten.
5. Once assembled, you can store your vacuum by inserting the storage clip (located on the back of the floor nozzle) into the storage slot on the rear of the vacuum.

WARNING : Plastic film can be dangerous. to avoid the danger of suffocation, keep away from babies and children.

Operations

Power cord
the power cord is located at the rear of the vacuum. Gently pull out the power cord, watching for the yellow line. Stop pulling the power cord once the yellow line is visible. there is also a red line, which indicates the end of the usable cord. Do not pull the power cord out beyond the red line.
Automatic cord rewind
your vacuum is equipped with an automatic cord rewind. When cleaning is finished, press the power button off and grasp the plug to disconnect from the electrical outlet. Hold the plug and press the automatic cord rewind button to rewind the cord automatically.
CAUTION : be careful to avoid injury as the cord retracts very quickly.
The power button
turns the power on or off by pressing lightly down on the power button ( ).
CAUTION : Before using your vacuum, make sure that the dirt cup and all filters are in place. Do not operate your vacuum without the dirt cup and filters.

Operations

Special tools
your Bissell Easy Vac Compact is not only a powerful carpet and rug vacuum cleaner, but it’s also a versatile bare floor and above floor vacuum cleaner when you select one of the special tools.
floor nozzle:
Use to vacuum carpets, rugs, and bare floors. Swivel head turns to get into tight spaces and fits under cabinets.
1. To vacuum carpets and rugs, push the brush switch to the carpet position . This will pull the brushes up into the floor nozzle.
2. To vacuum bare floors, push the brush switch to the bare floor position . This will extend the brushes down from the floor nozzle.
combination crevice tool/dusting brush:
Use the crevice tool in tight, narrow spaces. Use the dusting brush to clean curtains, draperies, cushions, and fabrics.

Tip : Before cleaning under low furniture, check the area first for objects that might harm the unit or block the hose.
Tip : Hair, string, and small objects can block the hose and tools. Check them occasionally for obstructions.

The airflow regulator
opens the airflow regulator by sliding the regulator down towards the extension wand to an open position. this will reduce the suction power for vacuuming delicate fabrics. for full suction power, close the airflow regulator by sliding the regulator up to the closed position.
Tip :
Use the airflow regulator to reduce airflow as needed when using the tools.

Maintenance and care

Emptying the dirt cup
Empty the dirt cup as soon as the dirt reaches the “fUll” lines on the sides of the dirt cup.

1. Unplug the vacuum from the electrical outlet.

2. Remove the hose by turning the hose connector counterclockwise and pulling it out from the suction inlet. Set hose aside.

3. Press the dirt cup release button on the carry handle and lift up to remove the dirt cup.

4. Choose an emptying method. Method #2 is recommended for allergy suffers.
   Method #1 – Hold the dirt cup over a trash can and push the emptying button to open the bottom. Close the bottom after the dirt empties.
   Method #2 – Place a plastic bag over the bottom of the dirt cup. Push the emptying button through the plastic to open the bottom. After the dust settles, close the bottom and remove the bag to discard.

5. Replace the dirt cup by placing it back into the vacuum and pushing down on the carry handle until it snaps back into place.

WARNING : To reduce the risk of electric shock, turn the power switch off and disconnect the plug from the electrical outlet before performing maintenance or troubleshooting checks.

Cleaning the dirt cup filters
Use only Bissell replacement filters in your Easy Vac compact.

1. Unplug the vacuum from the electrical outlet.
2. The dirt cup filters can be reached by removing the dirt cup from the vacuum, grasping the handle on the bottom of the dirt cup filter assembly, and turning counterclockwise to unlock. Pull straight down to remove.
3. Remove the dirt cup filter screen by grasping the bottom of the filter frame base and pulling straight up.
4. Remove the dirt cup filter by grasping the bottom of the filter frame base and turning the dirt cup filter counterclockwise and pulling straight up.
5. The dirt cup filter screen and dirt cup filter can be hand washed in cold water with a mild detergent. Rinse well and air dry thoroughly before placing back onto the filter frame base.
6. Attach the dirt cup filter back onto the filter frame base by lining up the tabs on the filter base with the notches on the dirt cup filter and turning clockwise to lock it back into place.
7. Attach the dirt cup filter screen back onto the dirt cup filter by sliding it down over the dirt cup filter, making sure that the tabs on the bottom of the dirt cup filter screen line up with the notches on the dirt cup filter.
8. Insert the dirt cup filter assembly back into the dirt cup by lining up the tabs on the top of the dirt cup filter assembly with the notches inside the top of the dirt cup and turning the handle on the bottom of the dirt cup filter assembly clockwise to lock into place.

Cleaning the pre-motor filter
the pre-motor filter protects the motor from dirt and dust particles. Use only Bissell replacement filters in your Easy Vac compact.
1. Remove the dirt cup from the vacuum, following steps 1-3 of Emptying the dirt cup on page 9.
2. The pre-motor filter is located between the power button and the automatic cord rewind button.
3. The pre-motor filter can be hand washed in cold water with a mild detergent. Rinse well and air dry thoroughly before placing back into the vacuum.

NOTICE : This product is intended for household use only and not for commercial or industrial use. Vacuuming dust from products like plaster, concrete, or ashes will damage the motor and void the warranty.
Tip : For maximum cleaning performance, check the filters often and clean or replace them if necessary.
WARNING : Do not operate cleaner with damp or wet filters or without all filters in place.

Replacing the post-motor filter
the post-motor filter assists in the filtration process to return cleaner air to the room. Use only Bissell replacement filters in your Easy Vac compact.

1. Unplug the vacuum from the electrical outlet.
2. Remove the filter door (located on the back of the vacuum) by pushing down on the tab and pulling out and away from the vacuum.
3. The post-motor filter can be hand washed in cold water with a mild detergent. Rinse well and air dry thoroughly before placing back into the vacuum.
4. Replace the filter door by placing the tabs on the bottom of the filter door into the notches on the bottom of the post-motor filter compartment and pushing the tab forward back into the vacuum to lock into place.

Clearing clogs from the dirt cup

1. Unplug the vacuum from the electrical outlet.
2. Remove the dirt cup from the vacuum, following steps 1-3 of Emptying the dirt cup on page 9.
3. Remove the dirt cup filter assembly from the dirt cup, following step 2 of Clean the dirt cup filter on page 10.
4. Tap the dirt cup filter assembly over a garbage container to remove any dirt or debris from the dirt cup filter screen that surrounds the dirt cup filter.
5. Reach up into the dirt cup to clear any dirt or debris from the dirt cup.
6. Check to see if there are any clogs in the suction inlet.
7. After clearing any dirt or debris from the dirt cup, replace the dirt cup filter assembly back in the dirt cup following step 8 of Cleaning the dirt cup filter on page 10.

Troubleshooting

WARNING : To reduce the risk of electric shock, turn the power off and disconnect the plug from the electrical outlet before performing maintenance or troubleshooting.
The vacuum cleaner won’t run
Possible causes
1. Vacuum cleaner is not plugged in
2. Power button is not pressed down
Remedies
1. Check electrical plug
2. Press the power button down

Vacuum cleaner won’t pick up or low suction

Possible causes

1. Tools, hose, and/or extension wands are blocked
2. Filters are dirty
3. Dirt cup is full
4. Hose connector not securely attached to the suction inlet
5. Crack or hole in hose
6. Airflow regulator is set to open or minimum setting
7. Clog in the dirt cup

Remedies

1. Remove each part and check for blockages
2. Check and clean or replace all filters
3. Empty dirt cup
4. Make sure the hose connector is locked into the suction inlet
5. Check hose and replace if needed
6. Change to the closed or maximum setting
7. A clear clog from dirt cup following instructions on page 12

Visible dust escaping from vacuum
Possible causes

1. Dirt cup is full
2. Filters missing or installed incorrectly
3. Filters are dirty
4. Hose is blocked
5. Hose connector not securely attached to the suction inlet
6. Crack or hole in hose

Remedies

1. Empty dirt cup
2. Check all filters for correct installation
3. Check and clean or replace all filters
4. Remove hose and check for blockages
5. Make sure the hose connector is locked into the suction inlet
6. Check hose and replace if needed

other maintenance or service not included in the manual should be performed by an authorized service representative.
thank you for selecting a Bissell product.
Please do not return this product to the store.

BISSELL Consumer Services

If your Bissell product should require service:
For information about repairs or replacement parts, or questions about your warranty, call: Bissell consumer Services
1-800-263-2535
Monday – Friday 8 a.m. — 10 p.m. ET
Saturday 9 a.m. — 8 p.m. ET
Or write:
BISSELL HOMECARE, INC.
PO Box 3606
Grand Rapids MI
49501 U.S.A.
ATTN: Consumer Services
Or visit the BISSELL website – www.bissell.ca or www.2Xbissell.ca
When contacting BISSELL, have model number of cleaner available.
Please record your Model Number:
Please record your Purchase Date:
NOTE : Please keep your original sales receipt. It provides proof of date of purchase in the event of a warranty claim. See Warranty on page 16 for details.
Please do not return this product to the store.

Replacement parts – BISSELL Easy Vac Compact

Item         Part no.            Part name
1               203-1531          Dirt Cup Filter Screen
2                203-1532         Dirt Cup Filter
3                203-1533          Dirt Cup Filter Frame Base
4                203-1534         Pre-Motor Filter
5                203-1535         Post-Motor Filter
6                203-1536          Floor Nozzle
7                203-1537           Hose with Handle
8                203-1538           Extension Wands (2)
9                 203-1539           Combination Crevice Tool/Dusting Brush

Warranty – BISSELL Easy Vac Compact

If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below.
limited one year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product, BISSELL Canada The corporation will repair or replace  (with new or remanufactured components or products), at BISSELL’s option, free of charge from the date of purchase by the original purchaser, for one year any defective or malfunctioning part. See information below on “If your BISSELL product should require service”. This warranty applies to products used for personal, and not commercial or rental service. This warranty does not apply to routine maintenance components such as belts or brushes. Damage or malfunction caused by negligence, abuse, or use not in accordance with the User’s Guide is not covered.
If your Bissell product should require service
Call BISSELL Consumer Services at the number listed below or visit the BISSELL website – www.bissell.ca to locate a BISSELL Authorized Service Centre in your area. If there are no authorized BISSELL Service Centres in your area, a BISSELL Representative at canada.custhelp@bissell.ca or at the phone number below will issue you a Return Authorization Number and a pre-paid mailing label to return the unit to BISSELL for warranty repair. The machine should be returned with a photocopy of your proof of purchase. (Your dated sales receipt is your warranty – do not send original.) If you need information about repairs or replacement parts, or if you have questions about your warranty, contact BISSELL Consumer Services.

Website :www.bissell.ca
E-mail : canada.custhelp@bissell.ca
or call:
BISSELL Consumer Services
1-800-263-2535
Monday – Friday 8 a.m. – 10 p.m. ET
Saturday 9 a.m. – 8 p.m. ET
or write :
BISSELL Homecare, Inc.
PO Box 3606
Grand Rapids MI
49501 U.S.A.
ATTN: Consumer Services

BISSELL CANADA CORPORATION IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE ASSOCIATED  WITH THE USE OF THIS PRODUCT. BISSELL’S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.

*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF  ANY OTHER WARRANTIES EITHER ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW,  INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE  ONE YEAR DURATION FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.
Note: Please keep your original sales receipt, it is your warranty.

©2010 BISSELL Homecare, Inc
BISSELL Canada Corporation
Niagara Falls, ON L2E 6W2
All rights reserved. Printed in China
Part Number 110-4210
Rev 2/10
Visit our website at:
www.bissell.ca

Bissell 59G4 Series Easy Vac Compact User Guide – Download [optimized]
Bissell 59G4 Series Easy Vac Compact User Guide – Download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>