MinimumRC F8F-Rare Bear Pro Assembly Instructions

June 8, 2024
MinimumRC

MinimumRC F8F-Rare Bear Pro Assembly Instructions

F8F-RareBear Pro

  1. Assemble the base.
    Assemble the base

  2. Fold hinge for many times to make the rudder surface move freely (also can be cut off and connected with transparent tape).
    Fold hinge

  3. Cut off this part.
    When the fuselage is combined, the screwdriver can be extended into the adjusting steering arm.
    Cut off part
    extend screwdriver

  4. Bond the fuselage, pay attention to the difference between the left and right sides of the fuselage.
    Bond the fuselage

  5. A
    Image #5

  6. Install aileron servo. The steering gear wire extends from the right side of the fuselage.
    Install aileron servo

  7. Insert wing support, pay attention to both sides symmetrical.
    Insert wing support

  8. Insert horizontal tail, pay attention to the symmetry of left and right sides, glue bonding
    Insert horizontal tail

  9. Glue the motor to the nose. The coating sticker can be pasted on the fuselage at this time.
    Glue the motor to the nose

  10. Reference to coated stickers.
    Reference to coated stickers

  11. Fold the aileron back and forth many times to make the rudder surface move freely. (It can also be cut off directly and connected with transparent tape.)
    Fold the aileron
    Sticking transparent tape on both sides to enhance the torsional rigidity of aileron
    Sticking transparent tape

  12. Bend the wing along the notch.
    Bend the wing

  13. Installation of the wing.
    Installation of the wing

  14. Installation of the control horns.
    Installation of the control horns

  15. Connect the pushrod clips with heat shrinkable tube and fix them with glue.
    Connect the pushrod clips

  16. Installation of the pushrods.
    Installation of the pushrods

  17. Installation of the control horns.
    Installations
    Image #17

  18. Installation of the servos.
    Installation of the servos

  19. Connect the pushrod clips & pushrods with heat shrinkable tube and fix them with glue.
    Connect the pushrod clips

  20. Installation of the pushrods.
    Installation of the pushrods 1
    Installation of the pushrods 2

  21. Attach the receiver to the fuselage with Velcro.
    Attach the receiver to the fuselage

  22. Attach the battery to the fuselage with Velcro.
    Attach the battery to the fuselage with Velcro

Completion of assembly

First test flight

  • The center of gravity is 10 mm from the leading edge of the wing. Move the battery forward and backward to adjust the center of gravity.
  • The amount of elevator, rudder and aileron is 5 mm for each side. Please adjust the rudder surface to the level before flight test.

Explore the ultimate possibility of airplane kits

MinimumRC.COM

MinimumRC F8F-Rare Bear Pro Assembly Instructions – Download [optimized]
MinimumRC F8F-Rare Bear Pro Assembly Instructions – Download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals