Laserliner 082.261A Compact Video Inspector User Manual
- June 5, 2024
- Laserliner
Table of Contents
Laserliner 082.261A Compact Video
**Inspector User Manual**
Completely read through the operating instructions, the„ Warranty and Additional Information“ booklet as well as the latest information under the internet link at the end of these instructions. Follow the instructions they contain. This document must be kept in a safe place and passed on together with the device.
Function / Application
This compact video inspection system allows easy visual inspection of hard-to- reach locations such as pipework, suspended ceilings and vehicles. The compare image function allows the user to see the differences between the live image and a saved reference image. The images and videos can be saved to the internal photo memory or a micro SD card.
General safety instructions
– The device must only be used in accordance with its intended purpose and
within the scope of the specifications.
– The measuring tools and accessories are not toys. Keep out of reach of
children.
– The structure of the device must not be modified in any way.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or significant vibration.
– The device must no longer be used if one or more of its functions fail or
the battery charge is weak. ist.
– When using the device outdoors, make sure that the weather conditions are
appropriate and/or that suitable protection measures are taken.
– The LCD unit must not be immersed in water. The base unit must not come in
contact with liquids.
– The camera head is not acid-resistant or fireproof.
– It is absolutely vital to ensure that the VideoPocket does not come into
contact with chemicals, voltage, moving or hot objects. This can damage the
device and put its user at risk of serious injury.
– The VideoPocket must not be used for medical examinations / examining
people.
– Please ensure compliance with the safety regulations set out by local and
national authorities with regard to the correct and proper use of the device.
– The unit is not suitable for taking measurements close to dangerous
voltages. Therefore always make sure that conductive parts are at zero
potential when carrying out measurements in the vicinity of electrical
systems. Safe isolation from the power supply and precautions to prevent
systems being switched on again must be ensured by implementing suitable
measures.
Safety instructions
Using artificial, optical emission (OStrV)
LED outlet
– The device works with LEDs of risk group RG 0 (exempt, no risk) in
accordance with the latest versions of applicable standards relating to
photobiological safety (EN 62471:2008-09ff / IEC/TR 62471:2006-07ff).
– When used for the intended purpose and under reasonably foreseeable
conditions, the accessible radiation of the LEDs is safe for the human eye and
skin.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility regulations
and limit values in accordance with EMC-Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft, petrol
stations or in the vicinity of people with pacemakers – may apply. Electronic
devices can potentially cause hazards or interference or be subject to hazards
or interference.
- LCD
- Hot keys
- ON/OFF
- Battery compartment
- Micro SD card slot
- Micro USB interface
VideoPocket
a 4x zoom
b Take photos and videos ‘Back’ menu function
c Photo and video gallery Compare image function
d Brightness adjustment ‘Next’ menu function
e Contrast adjustment
f ON/OFF
Camera
- Tool location hole
- Camera head
- LED
- Lens
Symbols
Tools
g Hook
h Magnet
i Mirror
j Adapter
1) Inserting batteries
Open the battery compartment and insert batteries (4 x typ AA) according to the symbols. Be sure to pay attention to polarity.
2) ON/OFF
3) Inserting micro-SD card
4) Fixing for tools
5) Take photo
6) Compare image function
7) Video mode / take video
8) Play video recordings
9) Delete image/video
10) Zoom (4 steps)
11) Switch between colour/bw
12) Brightness (10 steps)
13) Contrast (10 steps)
14) Image rotation
USB data transfer
Data saved on the SD card can be transferred to PC either with a suitable card reader or directly via the USB port. Please refer to the manual supplied with your card reader for information about connecting your card adapter or card reader to a PC.
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents, scouring agents and solvents. Remove the battery(ies) before storing for longer periods. Store the device in a clean and dry place.
Technical data (Technical revisions reserved. Rev21W37)
EU directives and disposal
This device complies with all necessary standards for the free movement of goods within the EU.
This product is an electric device and must be collected separately for disposal according to the European Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at: www.laserliner.com/info
SERVICE
Umarex GmbH & Co. KG
– Laserliner –
Möhnestraße 149, 59755 Arnsberg, Germany
Tel.: +49 2932 638-300, Fax: +49 2932 638-333
info@laserliner.com
Umarex GmbH & Co. KG
Donnerfeld 2
59757 Arnsberg, Germany
Tel.: +49 2932 638-300, Fax: -333
www.laserliner.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>