SCANGRIP 03.6102 Nova 10 CAS LED Floodlight Instruction Manual

: June 6, 2024
: SCANGRIP

Table of Contents

In thd Box
Product Features
WARNING
THE PROCESS TO DELETE THE PIN CODE IS:
INTEGRATED BLUETOOTH LIGHT CONTROL
USE
THE LAMP HAS THREE DIFFERENT IP RATINGS DEPENDING ON THE USE
BATTERY COMPLIANCE
USB POWER OUTLET
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SCANGRIP 03.6102 Nova 10 CAS LED Floodlight Instruction Manual

In thd Box

Bluetoth Light control app
Powerbank Built-in power bank with USB outlet to charge mobile devices
3 Year Warranty
Compatible with METABO / CAS battery system 12V – 18V
Manual

| Item no.
03.6102| Item no. 03.6131| Item no. 03.6134
---|---|---|---
03.6121 CAS BATTERY 18V 5.2Ah| | **|
03.6122 CAS CHARGER| | **|
03.6123 SCANGRIP POWER SUPPLY| | |

go to scangrip.com to register

Product Features

High efficiency COB LED

165 lm/W

10000 lm @ 100%
7500 lm @ 75%
5000 lm @ 50%
2500 lm @ 25%
1000 lm @ 10%

1600-16000 lux @0.5m

Compatible with METABO / CAS battery system
12V 4.0 Ah
18V 5.2 Ah

75W

0.5-5.5h @12V 4.0 Ah battery
1.25-12h @18V 5.2 Ah battery
Backup: 1h@1000 lm

-10o to
+40o C

IK07

1m

IP65
IP54 with battery cover

304x292x131mm

3.72kg

USB powerbank: 5V DC / 1A

WARNING

Always respect applicable legislation for working with electrical equipment in order to reduce the risk of accidents.
Avoid looking directly into the beam of light, as this will result in dazzling.
Do not use the lamp near a naked flame.
Protect the mains cable from oil, heat and sharp edges.
Only use Metabo CAS battery packs. Internal backup battery must be replaced with an original SCANGRIP battery.
Do not leave the battery flat, as this could render it INCAPABLE of being charged again.
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced
Luminaire is only suitable for direct mounting on non combustible surfaces.
The luminaire is designed to work with all Metabo CAS battery packs.
If the lamp is disconnected from mains and the battery is discharged, push the power button to enable internal back up battery. 10% LED will blink to indicate back up mode.

THE PROCESS TO DELETE THE PIN CODE IS:

Turn on the Bluetooth function.
Press the Bluetooth button for 10 second.
The pin code is reset.

INTEGRATED BLUETOOTH LIGHT CONTROL

Turn lamp on/off or adjust lamp output.
Connect, up to 4 lamps together.
Assign a pincode to prevent other users from controlling the lamp.

Compliant with iOS 10.3 or higher and Android 5.0 or higher.
Go to iTunes App Store, Google Play or download the app from our website.
Product Ovewrview

USE

To turn the lamp on or off, press the A button.
To increase the brightness, press the B button.
To decrease the brightness, press the C button.
When the brightness level is changed, the new value is saved, and the lamp will start at that level the next time it is turned on.
To enable/disable Bluetooth, press the D button.

THE LAMP HAS THREE DIFFERENT IP RATINGS DEPENDING ON THE USE

IP65 when used with a Scangrip power supply.
IP54 When the battery cover is mounted and closed.
IP30 When the battery cover is removed and using an external battery

BATTERY COMPLIANCE

The work light is designed to be used with Metabo CAS batteries.
It will accept the following battery voltages; 12V and 18V.
It is possible to use a Scangrip power supply instead of a battery.
When using a Scangrip Power Supply the battery cover must be removed.

USB POWER OUTLET

Built-in USB power outlet to charge mobile devices.
Output: 5V, 1A
The USB outlet is disabled when the lamp is in backup mode.

Discarded electrical products must not be disposed of together with household waste. Please use recycling facilities. Ask your local authority or retailer for advice on recycling.