msi Notebook User Manual

msi Notebook User Manual

Copyright and Trademarks Notice

Copyright © Micro-Star Int’l Co., Ltd. All rights reserved. The MSI logo used is a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names mentioned may be trademarks of their respective owners. No warranty as to accuracy or completeness is expressed or implied. MSI reserves the right to make changes to this document without
prior notice.

Revision History

▶ Version: 1.0
▶ Date: 02, 2020

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and radiates radio frequency energy, and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:

▶ Reorient or relocate the receiving antenna.
▶ Increase the separation between the equipment and receiver.
▶ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

NOTE
▶ The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
▶ Shield interface cables and AC power cord, if any, must be used in order to comply with the emission limits.

FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
▶ This device may not cause harmful interference.
▶ This device must accept any interference received, including interference that may cause undesired operation.

MSI Computer Corp.
901 Canada Court, City of Industry, CA 91748, USA
(626)913-0828
www.msi.com

CE Conformity

This device is in compliance with the essential safety requirements
and other relevant provisions set out in the European Directive.

Battery Regulations

European Union: Batteries, battery packs, and accumulators should
not be disposed of as unsorted household waste. Please use the
public collection system to return, recycle, or treat them in compliance
with the local regulations.

Taiwan: For better environmental protection, waste batteries should
be collected separately for recycling or special disposal.

California, USA: The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California.
For further information please visit: http://www.dtsc.ca.gov/hazardouswaste/ perchlorate/

Safety Guideline for Using Lithium Battery
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer. Discard used batteries
according to manufacturer’s instructions.

WEEE Statement

European Union: Under the European Union (“EU”) Directive on
Waste Electrical and Electronic Equipment, Directive 2002/96/ EC, which takes effect on August 13, 2005, products of “electrical
and electronic equipment” cannot be discarded as municipal waste anymore and manufacturers of covered electronic equipment will be
obligated to take back such products at the end of their useful life.

Chemical Substances Information

In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI provides the information of chemical substances in products at: http://www.msi.com/html/popup/csr/evmtprtt_pcm.html

RoHS Statement

Japan JIS C 0950 Material Declaration
A Japanese regulatory requirement, defined by specification JIS C 0950, mandates that manufacturers provide material declarations for certain categories of electronic products
offered for sale after July 1, 2006. http://www.msi.com/html/popup/csr/cemm_jp.html http://tw.msi.com/html/popup/csr_tw/cemm_jp.html

India RoHS

This product complies with the “India E-waste (Management and Handling) Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or
polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.

Turkey EEE regulation
Conforms to the EEE Regulations of the Republic Of Turkey.

Ukraine restriction of hazardous substances
The equipment complies with requirements of the Technical Regulation, approved by the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008 № 1057, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment.

Vietnam RoHS
As from December 1, 2012, all products manufactured by MSI comply with Circular 30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous
substances in electronic and electric products.

Upgrade and Warranty

Please note that certain components, such as memory modules, HDD, SSD, ODD, and Bluetooth/WiFi combo card, etc., preinstalled in the product may be upgradable or
replaceable by user’s request depending on the models users purchased. For any further information on the product users purchased, please contact the local
dealer. Do not attempt to upgrade or replace any component of the product if users do not understand the component location or how to assembly/disassembly, since it may
cause the product to be damaged. It is recommended that you contact the authorized dealer or service center for product service information.

Acquisition of Replaceable Parts

Please be noticed that the acquisition of replaceable parts (or compatible ones) of the product users purchased in certain countries or territories may be fulfilled by the
manufacturer within 5 years at most since the product has been discontinued, depending on the official regulations declared at the time. Please contact the manufacturer via http:// www.msi.com/support/ for the detailed information about the acquisition of spare parts.

Safety Instructions

Read the safety instructions carefully and thoroughly. All cautions and
warnings on the equipment or user’s manual should be noted.

Keep the notebook away from humidity and high temperature.

Lay the notebook on a stable surface before setting it up.

Do not cover the ventilators of the notebook to prevent the notebook
from overheating.

• Do not leave the notebook in an unconditioned environment with a storage temperature above 60ºC (140ºF) or below 0ºC (32ºF),which may damage the notebook.
• This notebook should be operated under maximum ambient temperature of 35ºC (95ºF).

Place the power cord in a way that people are unlikely to step on it. Do
not place anything on top of the power cord.

Always keep the strong magnetic or electrical objects away from the
notebook.

• Never pour liquid into the opening that could damage the equipment or cause an electrical shock.
• Never use any chemical substance to wipe the surface of this equipment, such as keyboard, touchpad, and notebook case.

If any of the following situations arises, get the equipment checked by
a service personnel:

• The power cord or plug is damaged.
• Liquid has penetrated into the equipment.
• The equipment has been exposed to moisture.
• The equipment has not worked well or you can not get it work according to User’s Manual.
• The equipment was dropped and damaged.
• The equipment has obvious signs of breakage.

Green Product Features

• Reduced energy consumption during use and stand-by
• Limited use of substances harmful to the environment and health
• Easily dismantled and recycled
• Reduced use of natural resources by encouraging recycling
• Extended product lifetime through easy upgrades
• Reduced solid waste production through take-back policy

Environmental Policy

• The product has been designed to enable proper reuse of parts and recycling and should not be thrown away at its end of life.
• Users should contact the local authorized point of collection for recycling and disposing of their end-of-life products.
• Visit the MSI website and locate a nearby distributor for further recycling information.
• Users may also reach us at gpcontdev@msi.com for information regarding proper disposal, take-back, recycling, and disassembly of MSI products.

MSI Highlights

Explore more exclusive features of MSI notebooks for all series, please visit: http://www.msi.com and https://www.youtube.com/user/MSI

How to use SteelSeries Engine 3 on MSI notebooks
MSI collaborates with SteelSeries to develop an exclusive SteelSeries Engine 3 in gaming notebooks. SteelSeries Engine 3 is the Apps to
combine frequently used functions for gamers in multiple devices management.

Sound by Dynaudio on MSI Gaming Notebooks
MSI partners with Dynaudio, the Danish sound specialists, in its gaming
notebooks to present you an authentic fidelity audio performance.

Color Your Life with True Color
MSI has partnered with Portrait Displays, Inc. in developing more accurate, high precision panel quality. MSI True Color Technology guarantees that each panel in a MSI notebook comes with the finest precision in color.

Tutorial: How to use Nahimic
Discover how to use Nahimic and its three features: Nahimic Audio
Effects, Microphone Effects and HD Audio recorder.

Introductions

Congratulations on becoming an user of this notebook, the finely designed notebook. You will have a delightful and professional experience in using this exquisite notebook. We are proud to tell users that this notebook is thoroughly tested and certified by our reputation for unsurpassed dependability and customer satisfaction.

Unpacking

First, unpack the shipping carton and check all items carefully. If any item contained is damaged or missing, please contact your local dealer immediately. Also, keep the box
and packing materials in case you need to ship the unit in the future. The package should contain the following items:
▶ Notebook
▶ Quick Start Guide
▶ AC/DC adapter and AC power cord
▶ Optional carry bag

Product Overview

This section provides the description of basic aspects of the notebook. It will help you to know more about the appearance of this notebook before using it. Please be aware that the figures shown here are for reference only.

Introductions

1. Webcam/ Webcam LED/ Internal Microphone
   • This built-in webcam can be used for picture taking, video recording or conferencing, and so on.
   • Webcam LED indicator, next to the webcam, blinks when webcam function is activated; LED goes out when this function is turned off.
   • The built-in microphone shares the same function with an external one.

2. Power Button/ Power LED/ GPU Mode LED
   Power Button
   • Press this key to turn the notebook power ON.
   • While the notebook is turned on, quick press this key to force the computer into sleep state. Press again to wake up the system from sleep state.
   • Long press this key to reset the notebook if needed.

Power LED/ GPU Mode LED
• Glowing white when the notebook power is turned on, and the UMA GPU mode is selected.
• Glowing amber when the optionally supported discrete GPU mode is selected.
• LED flashes when the notebook goes to the sleep state.
• LED goes off when the notebook is turned off.

3. Quick Launch Buttons
   Use the quick launch buttons to activate the specific applications or tools. The following quick launch buttons will only be functioning in the operating system with the
   necessary applications installed.

• This notebook may be pre-installed with a gaming utility, Dragon Center, providing users an astonished and efficient solution in game playing.
• Use this button to bring up the Dragon Center application.

• This notebook may be pre-installed a unique keyboard manager application, SSE (SteelSeries Engine). With this application, users will be able to own several combinations of keyboard hot keys defined separately for specific occasions.
• Use this button repeatedly to switch between keyboard configurations.

• Use this button to maximize the fan speed to cool down the overall temperature of the notebook.
• Button LED glows when the fan speed is set to maximum level; LED goes off when AUTO mode is selected.

4. Keyboard
   The built-in keyboard provides all the functions of a notebook keyboard. Refer to How to Use the Keyboard for details.

5. Touchpad
   This is the pointing device of the notebook.

6. Status LED Caps Lock
   Glows when the Caps Lock function is activated.

Front Side View

1.  Status LED
   Wireless LAN (WiFi)
   • LED glows when WLAN (WiFi) function is enabled.
   • LED goes out when this function is disabled
   Battery Status
   • LED glows when the battery is being charged.
   • LED turns amber while the battery is in low capacity status.
   • Continuously blinking if the battery fails. If the problem persists, please contact your local authorized retailer or service center.
   • Battery LED goes out when the battery is fully charged or when the AC/DC adapter is disconnected.
   Drive Activity Indicator
   LED blinks when the system is accessing the internal storage drives.

Right Side View

1. USB 3.2 Gen 1 Port USB 3.2 Gen 1, the SuperSpeed USB, delivers the higher interface speeds for connecting various devices, such as storage devices, hard drives, or video cameras, and offers more advantages over high-speed data transferring.
2. Card Reader The built-in card reader supports various types of memory cards. Check the Specifications for details.
3. Power Connector This connector is to connect the AC/DC adapter and supply power for the notebook.
4. Ventilator The ventilator is designed to cool the system. DO NOT block the ventilator for air circulation.

2-8 Left Side View

1. Kensington Lock This notebook provides a Kensington lock hole, which allows users to secure the notebook in place.

2. HDMI Connector HDMI (High-Definition Multimedia Interface) technology is the industry-leading interface and de-facto standard connecting high-definition (HD) and ultra highdefinition (UHD) equipment.

3. USB 3.2 Gen 1 Port USB 3.2 Gen 1, the SuperSpeed USB, delivers the higher interface speeds for connecting various devices, such as storage devices, hard drives, or video cameras, and offers more advantages over high-speed data transferring.

4. Audio Ports
   Microphone
   • Used for an external microphone.
   Headphone out
   • A port for speakers or headphones.

5. Ventilator
   The ventilator is designed to cool the system. DO NOT block the ventilator for air circulation.

6. RJ-45 Connector
   The Ethernet connector, with optionally supported transmitting rate of 10/100/1000 megabits per second, is used to connect a LAN cable for network connection.

7. Mini-DisplayPort
   The Mini-DisplayPort is a miniaturized version of the DisplayPort, with a suitable adapter, the Mini-DisplayPort may be used to drive displays with a VGA, DVI or HDMI
   interface.

8. USB 3.2 Gen 1 Port (Type C) (optional)
   USB 3.2 Gen 1, the SuperSpeed USB, delivers the higher interface speeds for connecting various devices, such as storage devices, hard drives, or video cameras,
   and offers more advantages over high-speed data transferring. The slim and sleek USB Type C connector features reversible plug orientation and cable direction and
   supports 5V/1.5A portable charging power when AC power is connected. USB 3.2 Gen 2 Port (Type C) (optional) USB 3.2 Gen 2, the SuperSpeed USB 10Gbps, delivers the higher interface speeds for connecting various devices, such as storage devices, hard drives, or video cameras, and offers more advantages over high-speed data transferring. The slim and sleek USB Type C connector features reversible plug orientation and cable direction and supports 5V/3A portable charging power when AC power is connected.

Rear Side View

1. Ventilator
   The ventilator is designed to cool the system. DO NOT block the ventilator for air circulation.

Bottom Side View

1. Ventilator
   The ventilator is designed to cool the system. DO NOT block the ventilator for air circulation.

2. Stereo Speakers
   This notebook may be equipped with built-in stereo speakers which deliver the high quality sound, and supports the HD audio technology.

3. Battery Reset Hole
   Whenever the system firmware (EC) is upgraded or the system hangs, please 1) power off the notebook; 2) remove the AC power; 3) use a straightened paperclip and insert it to this hole for 10 secs; 4) connect the AC power; 5) power on the notebook.

4. SSD Slot
   This notebook is equipped with a SSD M.2 slot that supports the SSD device with PCIe or SATA interface. Contact the authorized dealer or service center for product
   service

How to Use the Keyboard

This notebook provides a full functioned keyboard. To ensure that the keyboard will be functioning properly, it is a must to install the necessary applications before using the
keyboard function keys. Use the FN keys on the keyboard to activate the specific applications or tools. With the help of these keys, users will be able to work more efficiently.

Windows Key

You can find the Windows Logo key on the keyboard which is used to perform Windows-specific functions, such as opening the
Start menu and launching the shortcut menu.

Quick Launch Keys

Dragon Center

• This notebook may be pre-installing with a gaming utility, Dragon Center, providing users an astonished and efficient solution in game playing.
• Press both FN and F4 keys to launch Dragon Center application.

Super Battery

• Press FN and F5 keys to switch to Super Battery mode, the power saving mode provided by Dragon Center.

Webcam

• Press FN and F6 keys to turn the Webcam function on. Press again to turn it off.
• Webcam is turned off under default settings.

User Scenario

• Press FN and F7 keys repeatedly to switch between Extreme Performance/ Balanced/ Silent/ Super Battery/ User according to your preference, the user scenarios provided by Dragon Center.
• Refer to the Notebook Software Application Manual for further details.

Airplane Mode

• Press FN and F10 keys repeatedly to turn Airplane Mode on or off recurrently.

Disable or Enable Touchpad

Enable or disable the touchpad function.

Enter Sleep Mode

Force the computer into sleep state (depending on the system configuration). Press the Power button to wake up the systemfrom sleep state.

Switch Display

Switch the display output mode between the LCD, external monitor and both.

Use Multiple Monitors

If users connect an additional monitor to the notebook, the system will automatically detect the external monitor connected. Users will be allowed to customize the display settings.

• Connect the monitor to the notebook.
• Press and hold the Windows key, and then press [P] key to bring up [Project].
• Select how you want your display to project on the second screen from the selections of PC screen only, Duplicate, Extend, and Second screen only.

Adjust the Brightness Level of the Display

Increase the LCD brightness.

Decrease the LCD brightness.

Adjust the Sound Level of the Speaker

Increase the built-in speaker’s volume.

Decrease the built-in speaker’s volume.

Mute the built-in speakers.

Adjust the Brightness Level of the Keyboard Backlight LED

Increase the brightness level of the keyboard backlight LEDs.

Decrease the brightness level of the keyboard backlight LEDs.

Video: How to Use [Fn] Buttons

Watch the instruction video at: https://www.youtube.com/watch?v=u2EGE1rzfrQ

Specifications

The specifications listed here is reference only, and may change without notice. The actual products sold are different from areas. Visit MSI official website at www.msi.com, or contact the local retailers to learn the correct specifications of the product user purchased.

Physical Characteristic

Physical Characteristic

20V ,  14A
  AC/DC Adapter (option 2)|  1 x 230W, 19.5V Input: 100-240V~, 50/60Hz Output: 19.5V , 11.8A
  AC/DC Adapter (option 3)|   1 x 180W, 19.5V Input: 100-240V~, 50/60Hz Output: 19.5V , 9.23A
  AC/DC Adapter (option 4)|   1 x 150W, 19.5V Input: 100-240V~, 50/60Hz Output: 19.5V , 7.7A
  Battery|   6-cell
  RTC Battery|   Yes

Introductions

Storage

1 x USB 3.2 Gen 1 Type C (optional)
1 x USB 3.2 Gen 2 Type C (optional)
  Audio|     1 x Mic-in
1 x Headphone-out
  Video|     1 x HDMI
1 x Mini-DisplayPort
  LAN|   1 x RJ-45
  Card Reader|   1 x optionally supports SD3.0/ SD/ MMC
  Communication Port|
  LAN|   Supported
  Wireless LAN|   Supported
  Bluetooth|   Supported
  Display|
  LCD Type|   15.6” HD/ FHD/ UHD LED panel (optional)
  Video|
  Graphics|   • NVIDIA® GeForce® discrete graphics
with NVIDIA® Optimus™ supported
• Intel® HD UMA graphics
  VRAM|   GDDR6, based on GPU structure
  Webcam|
  Resolution|   HD
  Audio|
  Internal Speakers|   2 x stereo speakers

How to Get Started

Begin to Use the Notebook
For a new user of this notebook, we would like to suggest you follow the illustrations below to begin to use the notebook.

How to Use the Notebook Comfortably
If you are a beginner to the notebook, please read the following instructions to assure your own safety, and make yourself comfortable during the operations.

• Good illumination is essential in the work area.
• Choose a chair and desk with good ergonomics and adjust their heights according to your posture.
• Adjust the backrest to support your lower back comfortably when you are sitting upright.
• Place your feet flat on the floor with your knees bent to a 90 degrees.
• Adjust the angle/position of the LCD panel to have an optimal view.
•  Stretch and relax your body regularly. Always take a break after working for a period of time.

How to Manage Power Supply
This section provides users basic safety precautions to take when using an AC/DC adapter and battery power properly.

AC/DC Adapter

Ensure that your notebook is connected to an AC power source via the AC adapter before turning it on for the first time. If the notebook automatically shuts down due to low battery power, it is likely to cause system failure. Below are some Dos and Don’ts of an AC/DC adapter.
▶ Dos

• Use the adapter that shipped with your notebook only.
• Always be aware of heat coming from the in use AC/DC adapter.
• Unplug the AC power cord before disassembly the notebook.

▶ Don’ts

• Cover an in-use adapter since it can generate heat.
• Have the AC power cord plugged after powering off the system when the notebook is going to be left unused for a longer time.

Battery

When you get a new notebook or a new notebook battery, it is important to know how to charge and care for your battery in order to get the most out it for as long as you can.
Be aware of that the battery may not be replaced by users.
▶ Safety guidelines

• This notebook is equipped with a non-removable battery, follow the local regulations while discarding the notebook.
•  Always keep the notebook and its battery away from excessive moisture and extreme temperatures.
• Always unplug the AC power cord before installing any module to the notebook.

▶ Battery type

• This notebook may be equipped with a high-capacity Li-ion or Li-polymer battery pack depending on the model you have.
• The rechargeable battery pack is an internal power source of the notebook.

▶ Battery charging behavior
To optimize battery life and avoid a sudden power loss, read the tips below:

•  Suspend system operation if the system will be idle for a while or shorten the suspend timer’s time period.
• Turn off the system if you won’t be using it for a period of time.
• Disable unnecessary settings or remove idle peripherals.
• Connect an AC/DC adapter to the system whenever possible.

▶How to charge the battery properly
Please pay attention to the following tips before recharging the battery:

• If a charged battery pack is not available, save your work and close all running programs and shut down the system.
• Plug in an AC/DC adapter.
• You can use the system, suspend system operation or shut down and turn off the system without interrupting the charging process.
• The Li-ion or Li-polymer battery has no memory effect. It is unnecessary to discharge the battery before recharging. However, to optimize the life of battery, we suggest that consuming the battery power completely once a month is necessary.
• The actual charging time will be determined by the applications in use.

How to Set Up a Power Plan in Windows 10

A power plan is a collection of hardware and system settings that manages how your computer uses and conserves power. Power plans can save energy, maximize system
performance, or balance energy conservation with performance. The default power plans — Balanced and Power saver — meet most people’s needs. But you can modify settings for existing plans or create your own plan.

Choose or Customize a Power Plan

1. Find [Windows] icon in the lower-left corner of the screen.
2. Find [Settings] icon or [Settings] within the selection menu and click on it to bring out Settings.
3. Find [System] and click on it in Settings. Find [Power & Sleep] within the System selection menu.
4. Select [Additional power settings] under [Related settings] to bring out Power Options.
5. The Power Plan of [Balanced] is selected as an example here. Click on the [Change plan settings] to bring out Edit Plan Settings to customize a power plan.
6. Change settings for the plan selected in Edit Plan Settings.
7. Click on [Change advanced power settings] to bring out Power Options. Make advanced changes here to the selected power plan to meet your needs
8.  To restore the selected power plan back to its default settings, click on [Restore plan defaults].
9. Follow on-screen instructions to finish the configurations.

Create Your Own Power Plan

You are allowed to create your own Power Plan and customize it to meet personal requirements.

1. Click [Create a power plan] in Power Options.

2. Select an existing plan that meets your needs most, and give the new power plan a name. Click [Next] to continue.

3. Change the settings for the plan. Click [Create] to make the customized power plan taking effect.
   

4. Now you have a new power plan that is automatically set as active.

How to Use the Touchpad

The touchpad integrated in your notebook is a pointing device that is compatible with standard mouse, allowing you to control the notebook by pointing the location of the cursor on the screen.

▶ Configure the Touchpad
You can customize the pointing device to meet your personal needs. For example, if you are a left-handed user, you may want to swap the functions of the two buttons.
In addition, you can change the size, shape, moving speed and other advanced features of the cursor on the screen. To configure the touchpad, you can use the standard Microsoft or IBM PS/2 driver in your Windows operating system. The Mouse Properties in Control Panel allows you to change the configuration.

▶ Position and Move
Place your finger on the touchpad (usually using the forefinger), and the rectangular pad will act as a miniature duplicate of your display. When you move your fingertip
across the pad, the cursor on the screen will move simultaneously to the same direction. When your finger reaches the edge of the pad, lift your finger and place it
on a proper location of the touchpad to continue the movement.

▶ Point and Click
When you have moved and placed the cursor over an icon, a menu item or a command that you want to execute, simply tap slightly on the touchpad or press
the left button to select. This procedure, called as point and click is the basics of operating your notebook. Unlike the traditional pointing device such as the mouse,
the whole touchpad can act as a left button, so that your each tap on the touchpad is equivalent to pressing the left button. Tapping twice more rapidly on the touchpad is
to execute a double-click

▶ Drag and Drop
You can move files or objects in your notebook by using drag-and-drop. To do so, place the cursor on the desired item and slightly tap twice on the touchpad, and then
keep your fingertip in contact with the touchpad on the second tap. Now, you can drag the selected item to the desired location by moving your finger on the touchpad,
and then lift your finger from the touchpad to drop the item into place. Alternately, you can press and hold the left button when you select an item, and then move your
finger to the desired location; finally, release the left button to finish the drag-anddrop operation.

About HDD and SSD

This notebook may be equipped with hard disk drive (HDD) or solid state drive (SSD) depending on the models users purchased.
The hard disk drive and solid state drive are the data storage devices used for storing and retrieving digital information. Most SSDs use NAND-based flash memory, and have higher data transfer rates, lower power consumption, and faster read/write speed than HDDs. Do not attempt to remove or install the HDD and SSD when the notebook is powered on. Please consult an authorized retailer or service center for the replacement of the HDDs and SSDs.

About M.2 SSD Slot

The notebook may be equipped with M.2 SSD slots for M.2 SSD cards, which are compatible with SATA or PCIe interfaces, providing diverse features and usages to users.
Consult an authorized retailer or service center for correct specifications and installations.

How to Connect the Internet

Wireless LAN
Wireless LAN is a wireless broadband connection that allows you to connect to the Internet without using any cables. Follow the instructions as below to set up a Wireless LAN connection.

1.  Open up Settings, find and click [Network & Internet].
   

2. Select [Wi-Fi] within the Network & Internet selection menu.
   

3. Switch [ON] the Wi-Fi function if it is set to [Off].

4. Select [Show available networks] to open up the network selection table.

5. Make sure [Airplane mode] is turn off.

6. Select [Wi-Fi] here.

7. Choose one Wireless LAN connection from the network list to connect to the Internet. Click [Connect] to continue.
   

8. A security key may be required for connecting the selected network. Then click [Next].

Wired LAN

Using cables and network adapters to connect to the Internet. Before setting up the connection of Dynamic IP/PPPoE or Broadband (PPPoE) or Static IP, contact your Internet Service Provider (ISP) or network administrator for assistance of setting up Internet connection.

▶ Dynamic IP/PPPoE Connection

1. Open up Settings, find and click [Network & Internet].
   

2. Select [Ethernet] within the Network & Internet selection menu.

3. Select [Change adapter options] to bring out Network Connections window.
   

4. Right click on [Ethernet] to select [Properties] from the drop-down menu.

5. Open up Ethernet Properties window, find and select [Internet Protocol Version

4 (TCP/IPv4)] in Networking tab. Then click [Properties] to continue.

6.  Click [Obtain an IP address automatically] and [Obtain DNS server address
   automatically] in General tab. Then click [OK].
   ▶ Static IP Connection

7. Follow the previous steps 1 to 4 to continue.

8. Click [Use the following IP address] and [Use the following DNS server addresses] in General tab. Fill the IP address, Subnet mask, Default gateway,
   Preferred DNS server, and Alternate DNS server. Then click [OK].

▶ Broadband (PPPoE) Connection

1. Open up Settings, find and click [Network & Internet].
   

2. Select [Ethernet] within the Network & Internet selection menu.

3. Select [Network and Sharing Center] to bring out Network and Sharing Center window.

4. Select [Set up a new connection or network] under [Change your networking settings].

5. Select [Connect to the Internet] under [Choose a connection option], and then click [Next].

6. Click [Broadband (PPPoE)].

7. Fill User name, Password, and Connection name fields. Then click [Connect].

How to Set Up Bluetooth Connection

Bluetooth pairing is a process in which two Bluetooth devices communicate with each
other through an established connection.

Activating Bluetooth Connection
▶ Checking the Bluetooth status
Before setting up a Bluetooth connection, it is a must to make sure that Airplane mode is turned off.

1. Open up Settings, find and click [Devices].
   

2. Select [Bluetooth & other devices] within the Devices selection menu.
   

3. Switch [ON] the Bluebooth function if it is set to [Off].
   ▶ Pairing the Bluetooth devices

4. Click [Add Bluetooth or other device] to open up Add a device window.

5. Select [Bluetooth].

6. Choose and select a device to start pairing.

7. Give the passcode as instructed by the device waiting to be connected, and then click on [Connect] to continue and complete pairing.
   

How to Connect External Devices

This notebook may be equipped with various connecting I/O (input/output) ports, such as USB, HDMI, DisplayPort, and mini DisplayPort. Users will be able to connect diverse peripheral devices to the notebook. To connect these devices, refer to the instruction manuals of each device first, and then connect the device to the notebook. This notebook is capable to auto detect the connected devices, and if there is no detection of the devices, please manually enable the devices by going to [Start Menu/ Windows System/ Control Panel/ Hardware and Sound/ Add a device] to add the new devices.

Video: How to Use RAID Function

This notebook may support RAID function of different levels. RAID allows users to store data on multiple hard disk drives or solid state drives. Contact the local dealer for
further and correct information and be noted that the supported RAID functions may vary depending on the models users purchased. Watch the instruction video at: https://youtu.be/u2C35-ctFbw

How to Select Boot Mode in BIOS

1. Power on the system. As soon as the first logo screen appears, press the DEL key immediately and enter the BIOS menu.
2. Move the cursor to [Boot] tab, and select [Boot mode select] in Boot Configuration.
3. For operating system supports UEFI-based BIOS (Windows 10), it is suggested to select [UEFI].
4. Refer to MSI FAQ for further information about installing Windows operating system on the notebook at https://www.msi.com/support/technical_details/
   NB_OS_Installation
   

Video: How to Restore Windows 10 Operating System on MSI Notebooks

Watch the instruction video at: https://www.youtube.com/watch?v=hSrK6xAQooU, to restore the Windows 10 operating system by using [F3 Recovery] and [Windows 10
Settings] when it is needed.

Video: How to Use MSI One Touch Install

MSI “One Touch Install”, the one-click installer application, allows users to efficiently install all needed drivers on MSI notebooks with single click.
Watch the instruction video at: Windows 10/ 8.1: https://www.youtube.com/watch?v=ERItRaJUKQs Windows 7: https://www.youtube.com/watch?v=43lnM4m-500

Read More About This Manual & Download PDF:

msi Notebook User Manual – Download [optimized]
msi Notebook User Manual – Download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>