Bissell 2078 Series Poweredge Steam Mop User Guide

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING YOUR STEAM MOP.

When using an electrical appliance, basic precautions should be observed, including the following: Always connect to a polarized outlet (left slot is wider than right). Unplug from outlet when not in use and before conducting maintenance.

WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:

• This appliance can be used by children 8 years old and above, and persons with reduced physical, sensory and mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children without supervision.
• Children should be supervised to ensure that they do not play with the appliance.
• If the cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• Use extra care when cleaning on stairs.
• Do not use with damaged cord or plug.
• Do not use the outdoors.
• Always turn off this appliance before connecting or disconnecting the nozzle. Do not direct steam at people, animals, or at electrical outlets.
• Do not expose to rain. » Store indoors.
• Unplug from outlet when not in use and before conducting maintenance or troubleshooting.
• Do not leave steam cleaner unattended.
• Do not expose hair, loose clothing, fingers, or body parts to openings or moving parts.
• Do not service steam cleaner when it is plugged in.
• Do not handle steam cleaner with wet hands.
• Do not use the steam cleaner if it has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or edges, or expose cord to heated surfaces.
• Do not unplug by pulling on the cord.
• Do not use appliances in an enclosed space filled with vapor given off by oil-base paint, paint thinner, some moth-proofing substances, flammable dust, or other explosive or toxic vapors.
• Do not allow to be used as a toy.
• Do not use on leather, wax polished furniture or floors, synthetic fabrics, velvet or other delicate, steam-sensitive materials.
• Do not immerse in water or liquid.
• Not for space heating purposes.
• Do not use for any purpose other than described in this User’s Guide.
• Use only manufacturer’s recommended attachments – use of attachments not provided or sold by BISSELL may cause fire, electric shock or injury.
• Never put descaling, aromatic, alcoholic, detergent or vinegar products into the steam cleaner, as this may damage it or make it unsafe for use.
• Unplug by grasping the plug, not the cord.
• Close attention is necessary when used by or near children.

SAVE THESE INSTRUCTIONS FOR FUTURE USE

This model is for household use only. Commercial use of this unit voids the manufacturer’s warranty.

THIS APPLIANCE HAS A POLARIZED PLUG

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not change the plug in any way.

Thanks for buying a BISSELL PowerEdge™ Steam Mop

We love to clean and we’re excited to share one of our innovative products with you. We want to make sure your steam mop works as well in two years as it does today, so this guide has tips on how to use maintain, and if there is a problem, troubleshoot. Your steam mop needs a little assembly before you can put it to work, so let’s get started!

What’s In The Box?

NOTE : Standard accessories may vary by model. To identify what should be included with your purchase, please refer to the “Carton Contents” list located on the carton top flap.

Getting to Know Your PowerEdge ™

1. Handle
2. Ready Light
3. Pod Handle
4. Handheld Steam Trigger
5. Handheld Steamer Release Button
6. Triangle Mop Foot
7. Steam Trigger
8. Upper Cord Wrap
9. Lower Cord Wrap
10. Button to Remove Handle
11. Water Tank Release Button
12. Easy Fill Water Tank

Assembly

WARNING : Do not plug in your PowerEdge™ Steam Mop until you are familiar with all instructions and operating procedures.

Your BISSELL PowerEdge™ Steam Mop comes in three easy to assemble components and does not require any tools to assemble:

• Handle
• Body
• Triangle Mop Foot

Steps:

1. Attach lower body to mop pad foot by snapping it into place.

2. Then, insert a handle into the body of the unit until you hear a click.
   

3. Wrap the cord around the Upper and Lower Cord Wrap.

Filling Your Water Tank

WARNING: Never put descaling, alcoholic, vinegar, or detergent products into the steam cleaner, as this may damage it or make it unsafe for use.

1. The Easy-Fill Water Tank is located on the back of the machine.

2. Push-button on top of the water tank and lift out to remove.

3. To fill the water tank, remove the grey rubber nozzle on the back of the water tank.

4. Fill the water tank with distilled or demineralized water, recommended in place of tap water. Place the nozzle back into the water tank after filling and return the tank to the machine.

A few notes about filling the Water Tank:
• The Water Tank’s capacity is 300 mL (10 oz). DO NOT USE CHEMICALS IN THE WATER TANK OF YOUR POWEREDGE™ STEAM MOP.
TIP : Use of distilled water or demineralized water is recommended to prolong the life of your hard floor cleaner

Cleaning Your Hard Floors

NOTE : Before you clean, thoroughly sweep or vacuum the floor prior to cleaning with your PowerEdge™ Steam Mop. Your hard floor cleaner is designed to clean hard floorings, such as ceramic tile, marble, stone, and sealed hardwood floors. Use on waxed or some unwaxed floors may result in a diminished glossiness. The hard floor cleaner is not for use on unsealed wood floors. For best results, test in an inconspicuous area and check the care instructions from your flooring manufacturer.

1. Attach mop pad by wrapping around the bottom of the foot, making sure gray stitching is located on the front of the foot and the Quick-Grip Release Tab is located on the back

2. Plug machine into an outlet.

3. When the machine is plugged in, the READY light will start to blink. The READY light will turn to a solid light when the machine is ready to use.

4. Step on the back of the foot to recline the body of the machine to begin cleaning.

5. Push the trigger on the handle to release steam.

6. To be sure to sanitize an area of your floor, use the microfiber cloth pad and slowly and evenly stroke your steam mop back and forth at least three times over the area using continuous steam. For best results, remove the pad and wash after use.

7. When done cleaning, unplug the machine.

NOTE : Upon the first use of your steam mop or first use after refilling the water tank, the pump may make a “knocking” sound. This is normal and will diminish after a few seconds.

NOTE : The steam mop generates hot steam, so move the unit continuously when depressing the trigger as damage to flooring can occur. The trigger does not need to be depressed at all times.

Using the Handheld Steamer

1. When changing from mopping to the handheld feature, wait 10 seconds for steam to cool down.

2. Push the release button located on the bottom of the body of the unit and lift up to detach from the foot.
   

3. To remove the handle from the machine, push the button located above the clean water tank and lift up the handle.

4. Push the trigger on the handheld steamer to release steam.

5. Your PowerEdge™ Steam Mop may have come with tools to attach to the pod.

6. Connect desired tool to the end of the pod based on your cleaning needs.

7. Use the Grout Tool to clean flooring that has visible grout you would like to remove.

8. Use the Bristle Brush to clean around your sinks, countertops, showers, etc.

9. When done cleaning, unplug the machine.

10. Insert foot back into the body of the machine until it snaps in place. If you removed the handle, insert the handle back into the body of the machine unit it snaps into place.

Maintenance

Cleaning Your Steam Mop

WARNING: To reduce the risk of fire, electric shock, or injury, disconnect the plug from the electrical outlet before performing maintenance or troubleshooting.

1. Unplug the machine from the outlet.

2. Carefully remove the mop pad using the Quick-Grip Release Tab from the mop head.
   NOTE : Mop pad and lower assembly may be hot.

3. Mop Pads can be machine washed in warm water. Use only liquid detergents. Do not use fabric softeners or bleach. For best results, air dry.

4. Wrap cord around Upper and Lower Cord Wrap on the back of the steam mop and wipe all surfaces of the machine with a soft cloth.

5. Store upright in a protected, dry area. Store with dry pads as wet mop pads may damage wood and other delicate hard floors.

NOTICE: Since this product uses water, it must not be stored where there is a danger of freezing. Freezing will damage internal components and may void the warranty.

Troubleshooting

WARNING: To reduce the risk of electric shock, disconnect the plug from the electrical outlet before performing maintenance or troubleshooting checks.

you hear a click
Foot not installed properly| Insert the body of the machine into the steam mop foot until you hear a click
Streaking| Dirty mop pad| Remove and wash pad per instructions before further use
Use on waxed or oiled floor| If you have used floor polishes or wax on your floors, steam products may decrease glossiness. Refer to the wax or polish manufacturer. If you don’t wax or polish your floors, check the floor care instructions from your flooring manufacturer
Leaking| Mop pad is too wet| Remove and replace with dry mop pad
Knocking Noise| First use or water tank is empty| Fill water tank and knocking will diminsh after a few seconds

Warranty

If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Care by E-mail, telephone, or regular mail as described below.

Limited Five-Year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL will repair or replace (with new, refurbished, lightly used, or remanufactured components or products), at BISSELL’s option, free of charge from the date of purchase by the original purchaser, for five years any defective or malfunctioning part.
See information below on “If your BISSELL product should require service”
This warranty applies to products used for personal, and not commercial or rental service. This warranty does not apply to fans or routine maintenance components such as filters, belts, or brushes. Damage or malfunction caused by negligence, abuse, neglect, unauthorized repair, or any other use not in accordance with the user guide is not covered.
BISSELL IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.
*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES, EITHER ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE FIVE-YEAR DURATION FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.

Service

If your BISSELL product should require service:

Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area. If you need information about repairs or replacement parts, or if you have questions about your warranty, contact BISSELL Consumer Care.

Website: www.BISSELL.com
E-mail: www.BISSELL.com/email-us
Call: BISSELL Consumer Care 1-800-237-7691
Monday – Friday          8am – 10pm ET
Saturday                       9am  – 8pm ET
Sunday                         10am – 7pm ET

Please do not return this product to the store.

Other maintenance or service not included in the manual should be performed by an authorized service representative.
For any questions or concerns, BISSELL is happy to be of service. Contact us directly at 1-800-237-7691.

Register your product today!

Registering is quick, easy, and offers you benefits over the lifetime of your product.
You’ll receive:

BISSELL Rewards Points
Automatically earn points for discounts and free shipping on future purchases.

Faster Service
Supplying your information now saves you time should you need to contact us with questions regarding your product.

Product Support Reminders and Alerts
We’ll contact you with any important product maintenance reminders and alerts.

Special Promotions
Optional: Register your email to receive notice of offers, contests, cleaning tips, and more!

Visit www.BISSELL.com/registration!
Visit the BISSELL website: www.BISSELL.com
When contacting BISSELL, have the model number of cleaners available.

Please record your Model Number: ___

Please record your Purchase Date: ___

NOTE: Please keep your original sales receipt. It provides proof of purchase date in the event of a warranty claim. See warranty page.

Parts & Supplies

For Parts and Supplies, go to www.BISSELL.com and enter your model number in the search field.

We can’t wait to hear from you!
Rate this product and let us (and millions of your closest friends) know what you think!
For cleaning tips and more visit www.BISSELL.ca or fi nd us at: www.BISSELL.com

©2017 BISSELL Homecare, Inc
BISSELL Canada Corporation
Mississauga, Ontario L5N 0B3
All rights reserved. Printed in China
Part Number 161-1677 Rev 01/17
Visit our website at www.BISSELL.ca

Bissell 2078 Series Poweredge Steam Mop User Guide – Download [optimized]
Bissell 2078 Series Poweredge Steam Mop User Guide – Download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>