Sony SEL35F18 Interchangeable Lens User Manual

Sony Interchangeable Lens Operating Instructions

SEL35F18

This instruction manual explains how to use lenses. Precautions common to all lenses such as notes on use are found in the separate “Precautions before using”. Be sure to read both documents before using your lens.

This lens is designed for Sony α camera system E-mount cameras.

You cannot use it on A-mount cameras.

Notes on Use

• When carrying a camera with the lens attached, always firmly hold both the camera and the lens.

Precautions on using a flash

• When using a flash, always remove the lens hood and shoot at least 1 m (3.3 feet) away from your subject. With certain combinations of lens and flash, the lens may partially block the light of the flash, resulting in a shadow at the bottom of the picture.

Vignetting

• When using the lens, the corners of the screen become darker than the center. To reduce this phenomena (called vignetting), close the aperture by 1 to 2 stops.

A. Identifying the Parts

1. Lens hood index
2. Focusing ring
3. Lens contacts*
4. Mounting index

• Do not touch the lens contacts.

B. Attaching and Detaching the Lens

To attach the lens

(See illustration B–1.)

1. Remove the rear and front lens caps and the camera body cap.
   • You can attach/detach the front lens cap in two ways, (1) and (2).
2. Align the white index on the lens barrel with the white index on the camera (mounting index), then insert the lens into the camera mount and rotate it clockwise until it locks.
   • Do not press the lens release button on the camera when mounting the lens.
   • Do not mount the lens at an angle.

To remove the lens

(See illustration B–2.)

While holding down the lens release button on the camera, rotate the lens counterclockwise until it stops, then detach the lens.

C. Attaching the Lens Hood (supplied)

It is recommended that you use a lens hood to reduce flare and ensure maximum image quality.

Align the red line on the lens hood with the red line on the lens (hood index), then insert the lens hood into the lens mount and rotate it clockwise until the red point on the lens hood is aligned with the red line on the lens (hood index) and the lens hood clicks into place.

• When using a built-in camera flash or a flash supplied with the camera, remove the lens hood to avoid blocking the flash light.
• When storing, fit the lens hood onto the lens backwards.

D. Focusing

There are three ways to focus.

• Auto focus
  The camera focuses automatically.

• DMF (Direct manual focus)
  After the camera focuses in auto focus, you can make a fine adjustment manually.

• Manual focus
  You focus manually.

For details on mode settings, refer to the instruction manual supplied with the camera.

Specifications

*1 The value shown above for equivalent 35mm-format focal length is for Interchangeable Lens Cameras equipped with an APS-C sized image sensor.

*2 Minimum focus is the distance from the image sensor to the subject.

• Depending on the lens mechanism, the focal length may change with any change in shooting distance. The focal lengths given above assume the lens is focused at infinity.

Included items
Lens (1), Front lens cap (1), Rear lens cap (1),
Lens hood (1), Set of printed documentation

Design and specifications are subject to change without notice.

is a trademark of Sony Corporation.

Sony SEL35F18 Interchangeable Lens User Manual – Download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>