GOTON BKD-G0806-WLDB Smart Mirror Instruction Manual
- June 6, 2024
- GOTON
Table of Contents
Smart Mirror Instruction Manual
Thank you for purchasing this bluetooth system. This bluetooth speaker allow users to enjoy music or internet radio by pairing with bluetooth supported devices, such as smartphones, tablets and personal computers, that support the Advanced Audio Distribution Profile (A2DP). For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference.
Features and Specifications
Model: BKD-G0806-WLDB
Power Input: 8-15V DC
Loudspeaker: 4 /3w×2
Transmission Distance: ≤10m
Signal and noise ratio: ≥75dB
Bluetooth Version: v5.1
Working Current: 1A
Play Time: Continuous
Standard Distortion: ≤0.5%
FAQ
| Problems | Solutions |
|---|---|
| Multiple connections failure | 1). Check if it’s already connected, Disconnect |
the bluetooth pairing and then restart the speaker.
2). Check if there is too much bluetooth device around, which may cause
unsuccessful identify.
Staccato appears when
playing media| 1). Check if connected devices are beyond effective connection
distance(10m)
2). Check if there are obstacles between connected devices
No sound while playing media| 1). Check whether volume is adjusted or not 2).
Check whether the media has been paused
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.