PURE RESONANCE AUDIO C6 6.5 inch Ceiling Mount Speaker Instruction Manual
- June 3, 2024
- PURE RESONANCE AUDIO
Table of Contents
- PURE RESONANCE AUDIO C6 6.5 inch Ceiling Mount Speaker
- INTRODUCTION
- FEATURES
- SPECIFICATIONS
- SAFETY PRECAUTIONS
- INSTALLATION & OPERATION GUIDE
- DIMENSIONS
- BASIC SPEAKER INSTALLATION – 70 VOLT SYSTEMS AND APPLICATIONS
- BASIC ATTENUATOR/VOLUME CONTROL INSTALLATION
- SERVICE
- LIMITED WARRANTY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PURE RESONANCE AUDIO C6 6.5 inch Ceiling Mount Speaker
INTRODUCTION
The Pure Resonance Audio C6 is a 6.5” 2-way high-performance ceiling mount loudspeaker in a compact design. This 70V ceiling speaker delivers full-range high-quality sound ideal for background music or paging in commercial environments. With a built-in 30-watt 70-volt transformer and an 8-ohm bypass, the C6 is perfect for a wide range of applications, including business offices, retail stores, restaurants, classrooms, and conference rooms. The ABS enclosure with an iron back barrel contains a 6.5” polypropylene woofer and an adjustable 1” silk tweeter with a bezel-less magnetic iron grill.
FEATURES
- Seamlessly blends into the ceiling with the bezel-less magnetic grill
- 70 Volt / 100 Volt transformer with 8Ω bypass
- Power tap switch located on the front of the speaker for easy access
- 88dB sensitivity provides quality sound
- Wide frequency range and 30-watt power handling capability
- 6.5” woofer and 1″ adjustable tweeter
- Recessed 4-pin Euro lock screw terminal connector
SPECIFICATIONS
RMS Power Rating | 30 Watt |
---|---|
Frequency Response | 130Hz – 17kHz |
Impedance | 8 Ohms |
Transformer Taps | 1.8W, 3.75W, 7.5W, 15W, 30W @ 70V |
3.75W, 7.5W, 15W, 30W @ 100V
Low-Frequency Driver| 6.5″ Woofer
High-Frequency Driver| 1″ Adjustable silk driver
Speaker Cone Material| Polypropylene (PP)
Sensitivity SPL| 88±3dB @ 1W/1 m
Material| ABS, iron back barrel, and powder-coated iron mesh grill
Cutout Size| 9.45″ (240 mm)
Dimensions (Dia x D)| 10.51″ (267 mm) x 6.38″ (162 mm)
Weight| 7.28 lbs (3.3 kg)
Shipping Dimensions| 12.4″ (315 mm) x 12.2″ (310 mm) x 9.65″ (245 mm)
Shipping Weight| 9.48 lbs (4.3 kg)
SAFETY PRECAUTIONS
- Be sure to read the instructions in this section carefully before use. The included conventions of safety symbols and messages are regarded as essential precautions.
- We recommend you keep this instruction manual handy for future reference.
SAFETY SYMBOL AND MESSAGE CONVENTIONS
Safety symbols and messages described below are used in this manual to prevent bodily injury and property damage that could result from mishandling. Before operating this product, read this manual first and understand the safety symbols and messages to be thoroughly aware of the potential safety risks.
- WARNING! Indicates a potentially hazardous situation that, if mishandled, could result in death or serious personal injury.
- CAUTION! Indicates a potentially hazardous situation that, if mishandled, could result in moderate or minor personal injury and/or property damage.
WARNING!
IMPORTANT SAFETY INSTRUCTIONS
THIS PRODUCT MUST BE INSTALLED BY A QUALIFIED TECHNICIAN.
THE PROVIDED INSTALLATION HARDWARE MUST BE USED TO INSTALL THIS PRODUCT.
SPEAKER UNIT MUST BE ATTACHED BY A SAFETY CABLE!
Pro Acoustics is not responsible for the structural integrity of the
installation. Please ensure a qualified technician installs this product and
the building’s engineer, or architect has approved the equipment and
installation.
- DO NOT block any ventilation openings. Install following all safety standards and regulations.
- DO NOT allow any water exposure to speakers.
- Ensure that no damage to the speaker wire is present when installing. Frayed or unterminated wires can lead to electrical or fire danger. When preparing wires, make sure your amplifier is turned off & unplugged.
- AVOID instability in the installation or set up of speakers to avoid personal injury or property damage.
- Confirm the area where the speaker will be installed is structurally sound without signs of damage or structural issues.
- DO NOT plug in the speaker while hands are wet. It may lead to electric shock.
- MAKE SURE to pull plugs rather than pull wires. Using strained or damaged speaker wire may cause fire or electric shock.
- When connecting/disconnecting speakers, take care to remove the speaker connector without pulling out the wires. Contact with bare wires when energized can lead to electrical shock.
- AVOID installing speakers in humidity or dust, direct contact with the sun, near electric, smoke, or steam. It May cause fire or electric shock.
WARNING :
This apparatus must be securely attached following the installation
instructions to prevent injury. No naked flame sources – such as candles –
should be placed close to the product.
CAUTION: Changes or modifications not expressly approved by the
manufacturer could void the user’s
INSTALLATION & OPERATION GUIDE
SPEAKER PLACEMENT
- If you desire music over a wide area, it is best to have a larger number of speakers playing at low volume, rather than a few speakers playing at high volume. Keep this in mind when designing your system.
- Ideally, you should place the speakers as close to the primary listening area as possible. The perceived volume of the speaker decreases rapidly as it is moved further from the listener.
CONNECTING THE SPEAKER TO YOUR SYSTEM
-
The 4-pin Euro lock plug allows for speaker wire input as well as speaker wire output to easily daisy chain speakers in 70V applications.
-
Determine the locations for the speakers and estimate the length of the additional wire you will need for each speaker.
-
Connect the speaker wires from your amplifier to the ceiling speakers.
IMPORTANT: Be sure not to let any stray “+” and “-” strands touch each other. Touching strands can cause a short circuit that could damage the amplifier.
PLEASE NOTE:
Confirm that you have connected the speaker “+” to the amplifier “+” and the speaker “-” to the amplifier “-”. -
Turn your amplifier on and test the system with your favorite music.
DIMENSIONS
BASIC SPEAKER INSTALLATION – 70 VOLT SYSTEMS AND APPLICATIONS
Be careful not to cross wires when installing your speakers.
Wiring should always be negative to negative and positive to positive
BASIC ATTENUATOR/VOLUME CONTROL INSTALLATION
SERVICE
Ensure the problem is not related to operator error, or system devices that are external to this unit. Informa-tion provided in the troubleshooting portion of this manual may help with this process. Once it is certain that the problem is related to the product contact your warranty provider as described in the warranty section of this manual.
LIMITED WARRANTY
PRO ACOUSTICS, LLC. (“PRO ACOUSTICS”) warrants this product to the original
purchaser to be free from defects in materials and workmanship (subject to the
terms set forth below), for the following periods from the date of purchase.
THIS WARRANTY COVERS THE LISTED PRODUCTS AGAINST DEFECTS IN MATERIALS OR
WORKMANSHIP FOR THE FOLLOWING PERIOD
Warranty Terms
- Speakers 2 Years
- Amplifiers & Electronics 1 Years
- Microphones 1 Years
- Accessories 1 Years
PRO ACOUSTICS will repair or replace (at PRO ACOUSTICS’s option) this product
or any defective parts (excluding electronics and amplifiers) in this product.
Your authorized PRO ACOUSTICS dealer will inspect the product and, if your
dealer is not equipped to perform the repair of your PRO ACOUSTICS product,
they will replace your product or return it to PRO ACOUSTICS for repair, at
their discretion. Proof of purchase in the form of a bill of sale or receipted
invoice, which is evidence that this product is within the warranty period,
must be presented to obtain warranty service.
This warranty is invalid if the factory applied serial number has been altered
or removed from this product. This warranty is invalid if this product was not
purchased from a PRO ACOUSTICS authorized dealer. Cos-metic damage or damage
due to the accident, acts of God, misuse, abuse, negligence, commercial use,
or modification of, or to any part of, the product are not covered in this
warranty. This warranty does not cover damage due to improper operation,
maintenance or installation, or attempted repair by anyone other than PRO
ACOUSTICS or a PRO ACOUSTICS dealer which is authorized to do PRO ACOUSTICS
warranty work. Any unauthorized repairs will void this warranty.
This warranty does not cover products sold as is.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE THE EXCLUSIVE
REMEDY OF THE CONSUMER/PURCHASER. PRO ACOUSTICS U.S.A. SHALL NOT BE LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS
WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES
WHATSOEVER, INCLUDING BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY AND
FITNESS FOR A PRACTICAL PURPOSE.
This warranty gives you specific legal rights. You may have other rights which
vary from state to state.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>