PURE RESONANCE AUDIO PRA-S6.1 Outdoor Surface Mount Speaker Instruction Manual

S6.1 6.5″ OUTDOOR SURFACE MOUNT SPEAKER
INSTALLATION AND OPERATION MANUAL

Caution: Please read this manual carefully before operating.
Damage caused by misuse is not covered by the warranty.

INTRODUCTION

DESCRIPTION
The Pure Resonance Audio S6.1 redefines 70V all-weather surface mount speakers offering beauty, durability, performance, and simple usability as a single concept. The durable IP65 water-resistant rated enclosure makes the S6.1 perfect for music, paging, and general-purpose audio in both indoor and outdoor commercial environments. This 70-volt outdoor surface mount speaker contains a 6.5″ woofer with a 1″ tweeter and a built-in 70V/100V transformer with an 8-ohm bypass. Exclusive Optimal Bass Enhancement technology provides an improved low-end for richer and more robust sound. The S6.1 produces impeccable acoustic quality, high-fidelity audio, with clean and clear vocal reproduction for restaurants, bars, retail stores, fitness centers, schools, and other business applications.

FEATURES

• All-weather IP65-rated construction for demanding indoor and outdoor conditions
• Exclusive optimal bass enhancement radiator technology
• 6.5″ graphite woofer and 1″ silk tweeter
• 86 dB sensitivity provides high-output sound
• Line input 70 Volt/100 Volt selectable tap transformer and 8 Ohm bypass
• Quick installation with waterproof surface mounting bracket included
• Phoenix Euroblock screw terminal connector

SPECIFICATIONS

5W, 10W, 20W, 40W @ 100V
Woofer| 6.5″ Graphite
Tweeter| 1″ Silk soft dome
Protection| Water-resistant IP65
Material| ABS enclosure and metal grill
Mount| Waterproof surface mount bracket
Dimensions (H x W x D)| 11.22″ (285 mm) x 7.8″ (198 mm) x 7.68″ (195 mm)
Weight| 7.61 lbs (3.45 kg)

SAFETY PRECAUTIONS

• Be sure to read the instructions in this section carefully before use. The included conventions of safety symbols and messages are regarded as essential precautions.
• We recommend that you keep this instruction manual handy for future reference.

SAFETY SYMBOL AND MESSAGE CONVENTIONS
Safety symbols and messages described below are used in this manual to prevent bodily injury and property damage that could result from mishandling. Before operating this product, read this manual first and understand the safety symbols and messages so you are thoroughly aware of the potential safety risks.
WARNING!
Indicates a potentially hazardous situation which, if mishandled, could result in death or serious personal injury.
CAUTION!
Indicates a potentially hazardous situation which, if mishandled, could result in moderate or minor personal injury, and/or property damage.
WARNING!
IMPORTANT SAFETY INSTRUCTIONS
THIS PRODUCT MUST BE INSTALLED BY A QUALIFIED TECHNICIAN.
THE PROVIDED INSTALLATION HARDWARE MUST BE USED TO INSTALL THIS PRODUCT.
Pro Acoustics is not responsible for the structural integrity of the installation. Please ensure that a qualified technician installs this product and that the building’s engineer or architect has approved the equipment and installation.

1. To prevent injury, this apparatus must be securely attached in accordance with the installation instructions.
2. DO NOT block any ventilation openings. Install in accordance with all safety standards and regulations.
3. DO NOT install near electricity, smoke, steam, or any heat source such as stoves, radiators, heat registers, amplifiers, or other apparatuses producing heat.
4. DO NOT place any naked flame sources, such as candles, close to the product.
5. Ensure that no damage to the speaker wire is present when installing. Frayed or unterminated wires can lead to electrical or fire danger.
6. DO NOT plug in the speaker while your hands are wet. This may lead to electric shock.
7. When connecting/disconnecting speakers, take care to remove the speaker connector without pulling out the wires. Contact with bare wires when energized can lead to electrical shock.
8. USE hardware and accessories as indicated by the manufacturer.
9. REFER all servicing to qualified service personnel. Servicing is required when the speaker has been damaged in any way, does not operate normally, or has been dropped.

CAUTION!

1. When the speakers are installed on the walls, ensure the wall structure is reliable and that the speakers are firmly attached.
2. Install the speaker in a location that can structurally support the speaker’s weight and its mounting hard ware. Otherwise, it may result in the unit falling and causing personal injury.
3. Changes or modifications not expressly approved by the manufacturer could void the user’s warranty.

INSTALLATION & OPERATION GUIDE

SPEAKER PLACEMENT

• If you desire music over a wide area, it is best to have a larger number of speakers playing at low volume rather than a few speakers playing at high volume. Keep this in mind when designing your system.
• Ideally, you should place the speakers as close to the primary listening area as possible. The perceived volume of the speaker decreases rapidly as it is moved further from the listener.

CONNECTING THE SPEAKER TO YOUR SYSTEM

1. The 4-pin Euroblock plug allows speaker wire input and output to easily daisy chain speakers in 70V applications.

2. Determine the locations for the speakers and estimate the length of the additional wire you will need for each speaker.

3. Connect the speaker wires from your amplifier to the surface mount speakers.
   IMPORTANT: Be sure not to let any stray “+” and “-” strands touch each other. Touching strands can cause a short circuit that could damage the amplifier.
   PLEASE NOTE:
   Confirm that you have connected the speaker “+” to the amplifier “+” and the speaker “-” to the amplifier “-“.

4. Turn your amplifier on and test the system with your favorite music.

SPEAKER INSTALLATION

DIMENSIONS

BASIC SPEAKER INSTALLATION – 70 VOLT SYSTEMS AND APPLICATIONS

Be careful not to cross wires when installing your speakers.
Wiring should always be negative to negative and positive to positive (Figure 2. shows speaker c. incorrectly wired).

BASIC ATTENUATOR/VOLUME CONTROL INSTALLATION

SERVICE

In the event of a malfunction, ensure the problem is not related to operator error or system devices external to this unit. Once it is certain that the problem is related to the product, contact your warranty provider as described in the warranty section of this manual.

LIMITED WARRANTY

PRO ACOUSTICS, LLC. (“PRO ACOUSTICS”) warrants this product to the original purchaser to be free from defects in materials and workmanship (subject to the terms set forth below), for the following periods from the date of purchase.
THIS WARRANTY COVERS THE LISTED PRODUCTS AGAINST DEFECTS IN MATERIALS OR WORKMANSHIP FOR THE FOLLOWING PERIOD
Warranty Terms

PRO ACOUSTICS will repair or replace (at PRO ACOUSTICS’s option) this product or any defective parts (excluding electronics and amplifiers) in this product.
Your authorized PRO ACOUSTICS dealer will inspect the product and, if your dealer is not equipped to perform the repair of your PRO ACOUSTICS product, they will replace your product or return it to PRO ACOUSTICS for repair, at their discretion. Proof of purchase in the form of a bill of sale or receipted invoice, which is evidence that this product is within the warranty period, must be presented to obtain warranty service.
This warranty is invalid if the factory applied serial number has been altered or removed from this product. This warranty is invalid if this product was not purchased from a PRO ACOUSTICS authorized dealer. Cosmetic damage or damage due to accident, acts of God, misuse, abuse, negligence, commercial use, or modification of, or to any part of, the product are not covered in this warranty. This warranty does not cover damage due to improper operation, maintenance or installation, or attempted repair by anyone other than PRO ACOUSTICS or a PRO ACOUSTICS dealer which is authorized to do PRO ACOUSTICS warranty work. Any unauthorized repairs will void this warranty.
This warranty does not cover products sold as is.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE THE EXCLUSIVE REMEDY OF THE CONSUMER/PURCHASER. PRO ACOUSTICS U.S.A. SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE.
This warranty gives you specific legal rights. You may have other rights which vary from state to state.

PURE RESONANCE AUDIO®
866-676-7804
sales@pureresonanceaudio.com
www.PureResonanceAudio.com
Specifications may change without notice.

Documents / Resources

| PURE RESONANCE AUDIO PRA-S6.1 Outdoor Surface Mount Speaker [pdf] Instruction Manual
PRA-S6.1 Outdoor Surface Mount Speaker, PRA-S6.1, Outdoor Surface Mount Speaker, Surface Mount Speaker, Mount Speaker, Speaker
---|---

References

• Pure Resonance Audio: Commercial Audio Speakers, Amplifiers & More

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>