ZUMA Lumisonic Speaker Ceiling Light Installation Guide
- June 21, 2024
- ZUMA
Table of Contents
ZUMA Lumisonic Speaker Ceiling Light
Introduction
- Thank you for purchasing Zuma, the high-end audio and natural lighting system.
- Here you will find product specifications and a quick guide to get you started. Enjoy!
What’s in the box
Scan this QR code to watch our quick install video or visit www.zuma.ai/help.
Preparation
IMPORTANT:
Installing Zuma requires working with mains voltage. If you are not
experienced in working with mains voltage please consult a registered
certified electrician.
Install Zuma units one room at a time.
IMPORTANT
Turn off mains power for the lighting circuit of each room where Zuma will be
installed.
Check there are no obstructions such as joists, pipes, or cables in installation positions. Ensure positions have clearance as per Fig 3.
Items you will need:
- 95mm (3¾”) rotary hole saw with drill.
- A Wi-Fi® network with an active internet connection.
- An iOS device with iOS 14.4 or later to set up your system.
Before you Install
You can install up to 9 Zuma Speaker Lights on any single 6amp B type MCB without any other devices on the circuit. Consult an electrician if you intend to install 10 or more Speaker lights on one circuit.
- Power Supply (75W): Input 220 – 240V AC
- Output: +24V DC
- Max Continuous Power (25W)
The product must operate in a void where insulation is distanced from the product as per Fig 2. The product must only be attached to a ceiling that is 1.2cm to 3cm thick.
CLEAR OF INSULATION
Drilling holes
- If you are cutting new mounting holes in your ceiling, use a 95mm (3¾4″) rotary hole saw with the drill as per Fig 3. Inspect holes and ceiling cavity ensuring edges are not damaged.
- If you’re expanding existing holes please check www.zuma.ai/help for tips on how to do so easily and effectively.
IMPORTANT:
Do not install Zuma with dimmer switches. If you have dimmers remove them from
the lighting circuits and replace them with regular switches.
Wiring
Unscrew the cover on the mains side of the power supply noted 220-240V~ to access the terminals indicated in Fig 4.
Connect the live and neutral cable from your lighting circuit to the high voltage terminals marked 220-240V~ as per Fig 5. Tighten the screw terminals to secure the cables. Replace the cover and re-screw it to clamp the cable.
Installing Zuma
Place power supplies in the ceiling.
IMPORTANT:
For the best sound quality, secure the power supply to a safe location in the
ceiling cavity. Ensure there are no slack cables or objects that could vibrate
in the ceiling. It is recommended you follow local legal requirements and
regulations when doing so.
DO NOT PULL THE KEYS OUT AS PER FIG 7 RISK OF INJURY
Lift the unit out of the box as per Fig 8.
Connecting Zuma
Attach the power supply unit connector to the 7uma unit.
Hold the Zuma unit to the ceiling and remove both keys gently to secure it to the ceiling. Please retain at least one set of keys after completing your installation.
Attach the bezel and check orientation.
Download Zuma app
The Zuma app will walk you through connecting your Zuma units to your Wi-Fi network and managing your Zuma units.
- Search for Zuma on the App Store or visit: www.zuma.ai
- Launch the app and follow the steps to install and configure your Zuma units.
- For connecting other services including Alexa, please follow the instructions within the app.
IMPORTANT:
If the main LED of any Zuma unit doesn’t turn on, re-check the wiring for that
unit.
Configure the Zuma units in your first room when prompted to do so by the app, then move on to the next room.
IMPORTANT:
Once you turn on the power, you will have 15 mins to configure your Zuma
units. If this time lapses and you have not configured your Zuma units, please
refer to the instructions in the app.
Congratulations on configuring your Zuma units. Now you’re ready to control your lights and play music.
Can we help
- For additional help and to get the most from your Zumas, please visit www.zuma.ai/help or email us at help@zuma.ai.
- Alternatively, scan the following QR code to watch our easy-to-follow support and installation videos.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc. and any use of such marks by Zuma Aray Ltd. is under license. Other trademarks and trade names are those of their respective owners.
The Wi-Fi CERTIFIED logo is a registered trademark of the Wi-Fi Alliance. Wi- Fi Certification assures that the device has passed the interoperability test conducted by the Wi-Fi Alliance, a group that certifies interoperability among wireless LAN devices.
Amazon, Alexa, and all related logos are trademarks of Amazon.com, Inc.
The Spotify software is subject to third-party licenses found here: https://www.Spotify.com/connect/third-party-licenses.
Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. Apple, iPad, iPad Air, iPad Pro, iPhone, and AirPlay are trademarks of Apple Inc., registered in the U.S. and other countries. To control this AirPlay 2-enabled speaker, iOS 11.4 or later is required.
- To review your warranty coverage, please visit www.zuma.ai. © 2021 ZUMA Array Limited or its affiliates.
- Zuma and all related logos are trademarks of Zuma Array Limited or its affiliates.
The registered office of Zuma Array Limited is:
5 Garden Walk, London, United Kingdom, EC2A 3EQ.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>