SHOWLIGHT SL-480-WA Theatrical Spotlights Instruction Manual

June 3, 2024
ShowLight

SHOWLIGHT logo

SHOWLIGHT SL-480-WA Theatrical Spotlights

SHOWLIGHT SL-480-WA Theatrical Spotlights

INTRODUCTION

Thank you for having chosen LED Panel Light .Please read the user manual carefully before you initially start-up,

Tips: Before using the lamp, please check whether the local city voltage meets the range of AC90-240V

Description of the fixture

SHOWLIGHT SL-480-WA Theatrical Spotlights 1

  1. Fixation screws
  2. Barndoors
  3. LCD Display
  4. Functon knob
  5.  Power IN
  6. Power Out
  7. DMX Out
  8. DMX IN
  9. Insulated handle
  10. Installstion stand

Dimensions

SHOWLIGHT SL-480-WA Theatrical Spotlights 2

Channels Funtion

This fixture has 7-channel mode/4-channel mode for selection In DMX512 mode,If more than two fixtures have different settings,should check whether the channe functions are consistent. as show below â‘ â‘¡,Factory setting [7CH]

RDM Function

If use the RDM function, you must use the console to search each fixture and change the fixture address code in the DMX 512 mode. Identification Code: each fixture has an identification code as shown below①, the identification code of each fixture is device code:10000001  different , Please check he fixture label. device ID:01A1.10000001

DMX512 Function

In DMX mode, the LED display screen flicker is normal when where is no DMX 512 signal input, and the LED display is lights up when the DMX 512 signal is input

Technical Specifications

LED SOURCE| LEDs: 3200K 0.5Wx240pcs Edison LEDs  5600K 0.5Wx240pcs Edison LEDs. CRI> 90
---|---
Beam Angle| Beam angle 170 with hight- efficiency optical system
Control| 1.DMX512 2. RDM 3.Master/ Slave Operation
DMX Channels| 4CH/ 7CH(available)
Connection| PowerCON IN & OUT; 3- Pin DMX In& Out(5 – Pin DMX available)
Voltage| Electronic full- range AC 100-240V 50/60Hz
Working Temperature| Indoor IP20
– 20℃- 40℃(- 4°F- 104°F)
Power

Consumption

| 200W
Dimensions

( LxWxH)

| 62.2X12.8X26.4cm
Weight| 11.15Kg

Dimming、Brightness Function

Before using the fixture,you should check whether (Dimming, brightness function) is turned on ,As shown in figureâ‘ ; the factory setting is on .This function should be checked when the fixture does not turn on when the lamp is turned on. It is not affected by this function in DMX mode

ColorTemperature Function

In master-slave mode,Colortemp(color temperature function)can be adjusted from 3200K-5600K.As shown in figureâ‘ â‘¡,the factory settin is shown in figured.(Turn on Colortemp(Color temperature function );WW;CW function can not be used alone,use WW;CW function need to close Colortemp

SHOWLIGHT SL-480-WA Theatrical Spotlights 6

Control Board

SHOWLIGHT SL-480-WA Theatrical Spotlights 7

  • Adjust the key setting function on the control panel
  • Press“MENU”—>Display first -level menu—>
  • Press“Enter”—>Display second-level menu—>
  • Press“Down”&“Up”to adjust relevant function->
  • Press“Enter”and“MENU”to quit current menu
  • Press“Enter”—> To next first-level menu.

Operation

SHOWLIGHT SL-480-WA Theatrical Spotlights 7

Master/Slave Setting

  1. Master:Dimming mode/Strobe mode
  2. All Salves:DMX001(as below)

SHOWLIGHT SL-480-WA Theatrical Spotlights 9

e mode,Colortemp(

As shown in figure① rtemp( Color tempe

| color temperature funct

②, the factory settin <

rature function ); WW;

| on)c

OFF> CW

| an be adjusted from

is shown in figure function can not be

| d.3
---|---|---|---|---
e WW;CW function| nee| d to close Colortem| p|  |
 |  |  |  |  |
Col_Temp|  | Col_Temp|  | Col_Temp|
[3200]K|  | [5600]K|  | OFF|
 |  |  |  |  |
①|  | ②|  | 3|
 |  | 5/ 6|  |  | 2/6

IIIumination Diagram

SHOWLIGHT SL-480-WA Theatrical Spotlights 10DMX Channels

This fixture has two DMX channel mode options; 7channel mode ; 4channel mode

SHOWLIGHT SL-480-WA Theatrical Spotlights 11

DMX 7 Channels Function

Channel 1- 3200K 000- 255 levels dimming
Channel 2- 5600K 000- 255 levels dimming
Channel 3- CCT 000- 255 levels dimming,

available in color temperatures of 3200K- 5600K

Channel 4-STROBE| 000- 009 levels without function
010- 255 levels strobe function

Channel 5- Dim4

| 000- 063 first- level dimming delay function
064- 127 second- level dimming delay function
128-191 third-level dimming delay function
192- 255 fourth- level dimming delay function
Channel 6- DIMMING| 000- 255 levels master dimming
Channel 7- DIM Fine| 000- 255 levels dimming fine

DMX 4 Channels function

Channel 1-3200k 000-255 levels dimming
Channel 2-5600k 000-255 levels dimming
Channel 3-CCT 000-255 levels dimming,

available in color temperatures of 3200K-5600K

Channel4-DIMMING| 000-255 levels master dimming

Remarks:(ColourTemperature) contrast value

DMX levels CCT DATA DMX levels CCT DATA
000↔012 3200K↔3300K 128↔139 4400K↔4500K
012↔022 3200K↔3400K 139↔149 4500K↔4600K
022↔033 3400K↔3500K 149↔160 4600K↔4700K
033↔044 3500K↔3600K 160↔171 4700K↔4800K
044↔055 3600K↔3700K 171↔181 4800K↔4900K
055↔066 3700K↔3800K 181↔192 4900K↔5000K
066↔075 3800K↔3900K 192↔203 5000K↔5100K
075↔086 3900K↔4000K 203↔213 5100K↔5200K
086↔096 4000K↔4100K 213↔224 5200K↔5300K
096↔107 4100K↔4200K 224↔235 5300K↔5400K
107↔118 4200K↔4300K 235↔245 5400K↔5500K
118↔128 4300K↔4400K 245↔255 5500K↔5600K

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals