RollerMouse Pro RM-PRO3 Contour Design User Manual
- June 3, 2024
- contour
Table of Contents
RollerMouse Pro RM-PRO3 Contour Design
What’s in the Box?
- RollerMouse Pro
- Wrist rest (if included)
- Two Keyboard risers
Functions
- Cursor speed
- Power switch
- Rollerball
- Copy
- Paste
- Left-click
- Right-click
- Scroll wheel
- one Touch” double-click
No function for a wired unit.
Connecting Device
Cursor Speed (DPI)
Press the Cursor speed button A to cycle through cursor speeds. There are
speed selections that range from slow (600 DPI) to fast (2800 DPI). Speed can
be identified by the LED lights as shown. Hold Cursor speed button A for 8
seconds to default settings.
Click force adjustment
Click force refers to the level of resistance when clicking the Rollerbar. To
change the click force. Press and hold both the A ( Cursor Speed) and the F
(Left-click) buttons for two seconds. the LED light will show the current
click force setting. While continuing to hold the A button. release the F
button and use the scroll wheel (H) to change the click force setting. Let go
of A to select the click force setting.
Note: The Rollerbar click function can be turned off using the above
adjustment method, by moving the scroll wheel until all LEDs are lit.
Click volume adjustment
The Rollerbar has 6 different click volume settings. To change the click
volume. Press and hold both buttons A (Cursor speed) and button G (Right-
click) for two seconds. the LED light will show the current click volume
setting. To adjust the volume setting continue to hold button A and release
button G, then move button H (Scroll wheel) up/down to adjust the volume
setting. Release button A to confirm the adjusted click volume.
Note: The Rollerbar click volume can be turned off using the above
adjustment method, by moving the scroll wheel until all LEDs are lit.
Keyboard Risers
Before using your RollerMouse Pro, take a moment and adjust the keyboard
risers to achieve the desired keyboard height and angle. For a proper
ergonomic position, the front edge of the keyboard should be as close to the
Rollerbar as possible.
2-year Warranty
All Contour Design products come with a 2-year
Warranty
Product Support
For information on software drivers, product manuals, and advanced product
settings such as thin client mode, please visit
contourdasign.com/support
Sales Support
If you have questions about your recent purchase, email us: United States:
ergoinfo@contourdesign.com All other countries:
support@contour-design.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>