ROCKVILLE Wireless Hand Held Microphone System Owner’s Manual
- June 7, 2024
- RockVille
Table of Contents
ROCKVILLE Wireless Hand Held
Microphone System Owner's Manual
RWM4401UH
HIGH PERFORMANCE WIRELESS MICROPHONE SYSTEM
Who reads manuals?
Instead, go to vimeo.com/494444603 or scan the QR code and watch a short
video, which shows you how to
set this item up and how to use it.
Thank you for purchasing this Rockville RWM4401UN Wireless Microphone System. please read this installation guide carefully for proper use of your Rockville Wireless Microphone System. Should you need technical assistance, please call ore technical help line at 1-646-758-0144, Monday Thursday, 9am to 10pm EST., and Friday, 9am to 3pm EST.
Specs
Receiver (Front)
a. Antenna
b. Channel volume control
c. LCD screen
Remember to remove protective plastic film
Receiver (Back)
a. Antenna port
b. Power ON/OFF switch
c. Power input
d. Microphone ¼” unbalanced
e. Microphone XLR mix output
f. Channel outputs
Handheld Microphone
-
a. Microphone windscreen
-
b. Power LED indicator
When battery power reaches 20% or less, the indicator will turn on -
c. Power ON/OFF switch
When the switch is in the middle position, the microphone will be on MUTE/ STANDBY -
d. Battery compartment
-
e. Color coded base for each channel
-
f. Microphone frequency sticker location is revealed after the removal of the battery compartment cover
Frequencies
Receiver LCD Display
Setup and Operation
- The receiver should be placed in an area that is stable and least likely to shake the unit.
- The receiver should be at least 3′ off the ground for optimal transmission.
- Connect the antenna, balanced cable AF line, and power supply provided.
- The antenna should extend vertically.
- Switch on the receiver.
- While the receiver is in stand-by, switch on the microphones.
- Adjust volume as necessary.
Troubleshooting
RockvilleAudio.com
© 2021 ROCKVILLE// Features and specifications are subject to change and/or
improvement without notice.