Anko Power Station User Manual
- June 7, 2024
- Anko
Table of Contents
Anko Power Station
- Handle
- LED light
- Function board
- Switch button
- Decorative sheet
- LCD
- Speaker
- Positive terminal
- Negative terminal
Technical Specification
- 18pcs 0.2W LED
- With 12V 7Ah rechargeable battery inside
- Charging time: 21-27hs
- Working time: LED22H; Radio: 50H
- DC input: 5V
- Product size: 283123192mm
Panel function
- DC 5V IN, this interface can charge the product with an external DC input.
- DC 12V output, 1-4 stable DC power supply can be output through this interface.
- USB output can charge the product with voltage input 5V.
- ON/OFF switch can be used to control all functions except the LED light.
- LED/OFF switch can be used to control light.
- 4pcs blue light indicator shows charging status or current power level.
Audio Mixer
- MP3/Radio power switch.
- Short press changes to the last song, the volume will turn down by long time press.
- Short press pauses, long-press 3S to search FM frequency automatically. Memory function is also available.
- Short press change to next song, the volume will turn up by long time-pressed.
- MP3/Radio Model choice.
- AUX interface connector.
Charging method
1. When the power indicator is 25% power station needs to be charged.
2. Use DC 5V to charge the product.
3. When the indicator changes to red, the product is charging.
4. When fully charged Blue LED light will go on.
5. Power Station has overcharge and over-discharge protection.
Warnings
- Please read this instruction carefully before first use.
- Please ensure the DC voltage is the same as the products use.
- When LED is dark, pls charging immediately.
- If the product is not used for a long time, it must be charged for more than 8 hours.
- Please turn off the switch when not using this product.
- The best use environment temperature is 0 – 40
WARNING: This product is not waterproof, please do not put it in the water.
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>