tuya HKSWB-DWS09 WiFi Door/Window Sensor User Manual
- June 3, 2024
- Tuya
Table of Contents
tuya HKSWB-DWS09 WiFi Door/Window Sensor
Wi-Fi Door/Window Sensor User Manual HKSWB-DWS09
Note: If you have any questions about the APP or device, please click Profile ->Feedback to fill your feedback to us in APP.
PRODUCT REVIEW
This Door/Window Sensor is a Wi-Fi, battery-powered reed sensor, including the device part and magnet part. Working with APP together in your mobile phone, once the state change (close or open) is detected, the device will wake up the Wi-Fi connection to the Wi-Fi router, send an alarm signal to your mobile phone via Wi-Fi network, in the case that the APP internet is available locally or remotely. The alarm is selectable as a notification on your mobile phone with a bar display, banner with the tone, and vibration based on the APP Notification setting on your Mobile Phone. There is an around 2-second delay from the state changes to notification on your mobile phone depending on the internet connection quality. Besides working with apps, this device is compatible with Amazon Alexa and Google Home to check the device state (close or open), such as “Alexa, is the door open/closed?” or “OK Google, it the door on/off?” after the device linked to Alexa account and Google Home account correctly. This device is working as a scene to trigger other device actions that is compatible in the same APP such as turning on/off the plug and bulb. This device can be installed on Door, Window and Drawer, which one part is the frame and the other part can be moved.
PRODUCT FEATURES
- Working in 802.11 b/g/n 2.4GHz wireless network (no hub required);
- Wi-Fi network configuration with EZ (Smart Config) and AP(Access Point) mode;
- Powered by 2xAAA battery for lasting 6 months depending on alarm frequency;
- Real state (open/close) monitor in APP;
- Notification with Open/Close and Low battery (less than 10%);
- Offline Notification (To avoid constant reminders, an offline notification will be sent if the device stayed offline over 24 hours)
- Enable/disable notifications on Open/Close and low battery event in APP;
- Indicate the battery level in APP;
- Open/Close history record;
- Share device in family;
- Single color LED status indicator;
- Mounting with adhesive tape or screw;
- Works with Amazon Alexa, Google Home ;
- Support OTA
How to Get the device working
- Make sure your Wi-Fi network work in 802.11 b/g/n 2.4GHz and internet is available;
- Download the APP from Apple store or Google Play;
- Register an account in the APP and login with your email address or Mobile phone number;
- Setup the device’s Wi-Fi connection;
- Mount devise on specified location;
- Test and check the Device and APP working state;
- Check to work with Alexa and Google Home if necessary;
PRODUCT DESCRIPTION
The main device components are showing as follows:
Device Part Magnet Part
- Latch button: press the Latch button to take apart the battery cover from the device part in order to change the batteries or setup the Wi-Fi network.
- Button: Long press for 5 seconds this button to enter the Wi-Fi network mode. Switch between EZ mode and AP mode by long press the button more than 5 seconds
- LED indicator: indicate the device working state:
- Fast blinking in Red: EZ mode (Smart config) for Wi-Fi configuration;
- Slow blinking in Red: AP Mode for Wi-Fi configuration;
- Flash once in Red: Wi-Fi network connected,move the magnet from the device part to flash the Red;
Note
- To check the device is working or not: Move the magnet part to close the device, the LED indicator will flash;
- To check the device is Wi-Fi connection or not: If the LED indicator turns Red, the device is Wi-Fi connected.
PRODUCT SPECIFICATIONS
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>