MOTAG MO-SJR Smart Jump Rope User Manual

MOTAG MO-SJR Smart Jump Rope

Safety Precautions

Thank you for purchasing and use of our smart jump rope. Please read the precautions before use to avoid unnecessary risks in using the product. Wishing you a happy user experience.

1. The smart jump rope is equipped with a long rope. When using the jump rope, please put the jump tips for use to prevent yourself from being strumbled by the rope.
2. The smart jump rope should be placed out of the reach of children when not in use. Children must be supervised when using the jump rope to avoid damage caused by misuse.
3. The rope provided is for use in jump rope exercises only. Do not use it for other purposes.
4. To extend the life of your jump rope and prevent damage from battery leakage, we recommend removing the batteries after use if you do not expect to use the device for a period of several months or longer. Additionally, never leave weak or aging batteries inside the device
5. Do not expose this device to rain or moisture or submerge in water.
6. Do not use, store or transport the device where flammables or explosives are stored. Using your device in these environments increases the risk of explosion or fire.

Batteries Installation

1. Unscrewing the battery cover at the bottom of the jump rope handle.
2. Install two “1.SV, AAA” sized batteries.
3. Screw and tighten the battery cover back to the handle.

Note:
Check the LCD screen after the batteries are installed.

If the display can be turned on, then the batteries are properly installed.

Button and Parts

Icon Description

Jump Rope Installation

Follow the instructions described below to install the jump rope for both Normal mode and Cordless mode.

• Step 1. Press and hold the Clip Button to unlock the eyelet of the clip, put the end of the jump rope across from the eyelet of the clip, and release the Clip button to lock it. Then put the end of the jump rope across the eyelet of the handle.
• Step 2. Follow the similar instruction in step 1 to put the end of the jump rope across from the eyelet of the handle to the eyelet of the clip.
• Step 3. Press and hold the Clip Button to unlock the eyelets of the clip, move the clip close to the handle and adjust the rope to the desired length, release the Clip button to lock it, then put the cap onto the end of the rope.

There are two control modes for the smart jump rope:

Directly control the jump rope
You can directly operate the smart jump rope, and the jump rope LCD display can show real-time dumbbell fitness data. To avoid affecting by the automatic connection between the device and the App in your mobile phone, please turn the Bluetooth off in your phone.

Control via the MOTAG SMART FIT APP
When the jump rope is connected to the MOT AG SMART FIT APP, the smart jump rope can be controlled in the APP, the jump rope LCD display will refresh the fitness data as the APP at the same time.

Control on the Jump Rope

Free Jump mode:

Timing Jump mode:

Counting jump mode:

• Step 1: Repeatedly press the On/Off button to switch the icon Counting appears.
• Step 2: Press and hold the On/off button for 2 seconds until you hear a “beep” sound to enter the time setting. Each press will increase the time by 1 minute. After setting the exercise time, press and hold the On/Off button for 2 seconds, “beep” Sound will continue for 5 seconds and then the timing jump starts.
• Step 3: After spending the will be Counting shown; jump Press ends, and reset hold the jump On/Off number.

Note:
When there is no operation for 3 minutes on the device, the LCD display will be turned off and Bluetooth will be disconnected automatically, and the device will turn off in 20 minutes.

Control Via The MOTAG SMART FIT APP

1. Turn on the Bluetooth, network& GPS in your phone, pp search Store for” download MOTAG and SMART” in install the Google MOTAG Play SMART Store FIT or a pp. System requirement:
   mobile device running on iOS° 9 or higher, Android 5.0 or higher
   Note: To safely and permanently storèd your fitness data, you need tap Sign Up to set up a new account.

2. Press the Display ON/OFF button to turn on the display and the Bluetooth icon on the LCD display flashes.

3. Launch the App, and tap Add Device or tap the icon on the home screen; it will automatically search for nearby devices. If the device is found, tap Add>. If the device cannot be found, you can tap the Jump Rope icon on the Add Device screen to add manually.

4. Wait until the Bluetooth icon stops flashing, and the icon appears on the phone screen to indicate that the connection is complete.

5. Tap Done, then tap the Jump Rope
   Name to begin remotely controlling the bulb with the App. You can tap the icon to rename the jump rope.

6. For the first use, please input your personal information in the App: gender, height and weight. The APP can then analyze and provide your personal fitness data for your reference. Set the daily training goals on the setting page, then tap Confirm to get started.

7. Using the MOT AG SMART FIT APP: After the jump rope is connected to the APP, the voice broadcast function of the APP will provide encouragement in various languages with the increase in the number of jumps during exercise, so as to make exercise more fun. This feature can be enabled or disabled according to your preference.

Timing jump: after setting the time, click the confirm key (The default is 1 min.).

Counting jump: the default is 100. You can modify to any number. Click on any area to confirm the number setting.

Once successfully connected with the smart App, the smart jump rope will automatically connect with the App next time they are turned off and on again. But when the batteries are removed from the jump rope, the pairing will be disconnected and it will need to connect again.

Product Specification

FCC Statement

FCC ID: 2AJVKMO-SJR
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio Communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning up the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet the general RF exposure requirements. The device can be used in Conditions without restriction.

2022 MOTAG”, ALL RIGHTS RESERVED.
The information contained in this user manual and all accompanying documentation is copyrighted and all rights are reserved.

Product Limited Warranty

The purchaser MOTAG” that the Limited 1 product Year is free Warranty from any guarantees defect, the in material original and product workmanship, according into conjunction any with accompanying the original labels and purchaser instructions. using the THIS PURCHASE. GUARANTEE IS MOT AGVALID ® FOR agrees on ONE that it YEAR will, at FROM its discretion, ORIGINAL either DATE repair OF the charged defect to or the replace purchaser, the for defective parts or product, labor, for or the part-time thereof, period at no stated. This misuse, limited modification, warranty or does normally not cover wear and tear, or damage and is caused limited by to accident, the value addition of to the product. applicable The law. ALL limited IMPLIwarranty ED WARRANTIES described herein INCLUDING is in THE LIMITED WARRANTIES TO THE OF PERIOD MERCHAFROM STABILITY THE DATE AND OF FITNESS ORIGINAL FOR USE PURCHASE ARE SET FORTH.

Warranty Some last, so states the do above not allow limitation limitations may not on apply how to long you. an implied either the make sales any personnel warranties of other the seller than or those any other described person herein is or to authorized extend to the herein duration on the of behalf any of warranties MOT AG”. beyond the time period described The warranties granted described by MOT herein AG” and shall be the sole and exclusive remedy manner and available for the to the period of the purchaser. time described Corrections of herein, defects, shall in the constitute the complete purchaser fulfillment with of respect all to liabilities the and product and responsibilities shall of constitute MOT full AG” to liability satisfaction or of all otherwise. claims, In no weather event, shall be based on MOTAG” contract be liable or negligence, in any strict way damage. responsible, Some states do incidental not allow the consequential exclusion of economic incidental or property THIS consequential LIMITED damages, WARRANTY, so the GIVES above YOU SPECIFIC exclusion LEGAL may not RIGHTS. apply to YOU you.

MAY ALSO HAVE OTHER RIGHTS, WHICH VARY AG FROM at STATE TO STATE.
If you have support@motag.com any questions or visits please contact www.motag.com.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>