MOTAG MO-SSD5 Smart Dumbbell User Manual

MOTAG MO-SSD5 Smart Dumbbell

Safety Precautions

Thank you for purchasing our smart dumbbell. Please read the precau ons before use to avoid unnecessary risks in using the product.

1. The total weight of a single dumbbell is 2kg, and the adjustable weights are 1.0kg, 1.5kg and 2kg. There is a metal block is built in the base cover to increase its weight. When the weight needs to be adjusted, the base cover shall be upwards and unscrew carefully to prevent the base cover from slipping off and drop to cause any damage.
2. Dumbbells should be placed out of the reach of children when not in use. Children must be supervised when using the dumbbell to avoid damage risk caused by misuse.
3. This dumbbell is only for indoor use, it is not waterproof. Do not expose this device to rain or moisture or submerge in water.
4. When the Smart Sensor of dumbbell is removed for charging, it can be pushed out from the rear hole.
5. When using the dumbbell, please adjust the weight according to your needs to avoid any damage caused by the excessive weight movement.
6. Avoid dropping, when using the Smart Dumbbells, please hold the dumbbells tightly to prevent it from slipping.
7. Do not use the dumbbell on other parts of the body or exercise in an abnormal way to avoid damage to the body.
8. Hands must be dry when plugging the charging cable into a USB power source to prevent electrical shock.
9. Do not use any corrosive cleaner/oil to clean. The device may be wiped with a dry or slightly damp cloth when the power is off. 10. If not using the device for a long me, it is recommended that you recharge the deivce every 3 months for beer baery performance.

NOTES:

1. About the APP user account: considering the security of personal sports data, each dumbbell can only link one app account. When user account A links the Smart Dumbbells, user account B cannot link the Smart Dumbbell without unlinking. If the user forgets his account name and passwords, he can press and hold the Reset buon at the back of the Smart Senor in the dumbbell for 5 seconds to restore to factory sengs, and the Smart Senor will shut down, then restart automa cally. At this me, the link of the previous account can be released.
2. Disconnect a device with the App: You can see all the smart dumbbell on the APP home screen, tap to select the dumbbell you need to be delete, tap Remove Device.

Adjust dumbbell weights

• To adjust the weight of the dumbbel, keep the base cover upwards and turn counter clockwise to open, then add or remove the metal block to your desired weight, and turn
  the base cover clockwise to lock it in place.
  Note: During the adjustment, make sure the base cover faces upwards to avoid any accident.

• Weight of dumbbell: the weight of dumbbell itself is 2.2lb (1 kg), coming with 2pcs 1.1 lb (0.5kg) metal counter weights, and the total weight of dumbbell is 4.4lb (2kg). The weight can be adjusted from 2.2 lb (1 kg ), to 3.3 lb (1.5kg) & 4.4 lb (2kg). If 2.2 lb (1 kg) weight is required, remove the two internal movable metal blocks; If 3.3 lb (1.5kg) is required, only short metal blocks shall be installed (Do not install the long metal blocks to avoid shaking when hold the dumbbell for exercise.).
  When 4.4 lb (2kg) is used, all the metal blocks shall be installed.

Charge the Smart Dumbbell

• You can charge the Smart Dumbbell through the built-in Smart Sensor (Note: There are two sensors for the Smart Dumbbell, refer to the included drop card to find the true smart sensor to use, the other sensor is only for decora on.). When charging is required, press outwards from the hole at the back of the dumbbell to remove the smart sensor.
• To charge the device, connect one end of the included Micro USB charging cable to the charging port of the smart sensor, and connect the other end to a USB power source. When charging,
• You can charge the Smart Dumbbell through the built-in Smart Sensor (Note: There are two sensors for the Smart Dumbbell, refer to the included drop card to find the true smart sensor to use, the other sensor is only for decora on.). When charging is required, press outwards from the hole at the back of the dumbbell to remove the smart sensor.
• To charge the device, connect one end of the included Micro USB charging cable to the charging port of the smart sensor, and connect the other end to a USB power source. When charging,

**Icon Description

Control on the Smart Dumbbell**

Control Via The MOTAG SMART FIT APP

1. Turn on the Bluetooth, network & GPS in your phone, search for “ MOTAG SMART”in the Google Play Store or Apple App Store to download and install the MOTAG SMART FIT app .

System requirement: Mobile device running iOS® 9 or higher, Android™ 5.0 or higher
Note: To be safely and permanently stored your fitness data, you need tap Sign Up to set up a new account

2. Turn on the smart sensor, the Bluetooth icon on the LCD display flashes.
3 . Launch the App, and tap Add Device or tap the icon on the home screen; it will automa

If the device cannot be found, you can tap the Dumbbell icon on the Add Device screen to add manually or press the Reset button at the back of the smart sensor to reset it.

Wait unthe Bluetooth icon stops flashing, and the icon appears on the phone screen indicating that the connecation is complete
5. Tap Done, then tap the dumbbell name to begin remotely controlling the bulb with the App. You can tap the icon to rename the dumbbell.6.For the first use, please input your personal informa on in the app: gender, height and weight. The APP can then analyze and provide your personal fitness data for your reference. Set the daily training goals on the seeng page, then tap Confirm to get started. 7. The picture below shows the screen for the real- me dumbbell fitness result on the App. 8. Aer the smart dumbbell is connected to the App, the voice broadcast func on will provide encouragement in various languages with the number increasing during the exercise to let the exercise be more fun. You can also enable or disable this feature according to your preference. Timing mode: tap Set up to set the countdown me, then tap Confirm > GO.
Coun ng mode: the default countdown number is 100, you can tap Set up to set to any number. Tap on any area to confirm the songs and tap GO to get started.

NOTES:

1. About the APP user account: considering the security of personal sports data, each dumbbell can only link one app account. When user account A links the Smart Dumbbells, user account B cannot link the Smart Dumbbell without unlinking. If the user forgets his account name and passwords, he can press and hold the Reset button at the back of the Smart Senor in the dumbbell for 5 seconds to restore to factory sengs, and the Smart Senor will shut down, then restart automa cally. At this me, the link of the previous account can be released.
2. Disconnect a device with the App: You can see all the smart dumbbell on the APP home screen, tap to select the dumbbell you need to be delete, tap Remove Device.

Troubleshooting

1

|

The device can not be turned on.

| Use the charging cable to ac vate the device: connect the Micro USB end of the charging cable to the Micro USB port of the Smart Sensor for the dumbbell, connect the other end of the charging cable to a USB cable. If the display is turned on, then you can use it normally.

2

| The device can be turned on, but there is no response when opera ng on the touch screen.| Press and hold the Reset bu on at the back of the Smart Senor for 5 seconds to restore to factory se ngs, and the Smart Senor will shut down, then restart automa cally. Tap the Touch Key to check whether you can use it normally.

3

| The App can not connect with the smart Dumbbell, the

Bluetooth icon flashes on the

| 1.  Check whether the smart sensor of the dumbbell is turned on.

2.  Check whether the Bluetooth in your phone is turned on.

3.  Pull down and refresh the page, and check whether the connec on is

| display of the| successfull a er 2 seconds.
| smart sensor.| 4. Check whether the smart dumbbell
| | is connected to another device, if so,
| | disconnect the dumbbell from
| | another device.

4

|

The device shutdown automa     cally a er turning on.

|

Check whether the ba ery power is low: Connect the charging cable to the smart sensor and a USB power to ac vate the display. If the ba ery indicator on the display screen shows low ba ery, charge the device.

---|---|---
| |

When the Smart Sensor is not

| The display| connected to app or there is no
| screen of the| opera on on it for 1 minute, the
5| smart sensor turns off automa cally.| display screen of the Sensor will enter to sleep mode automa  cally (Press the Touch Key once to wake the
| | display screen again). And the Smart
| | Sensor will shutdown automa cally
| | a er 20 minutes.

Product Specifications

Power input: 4.75~5.25V, 0.5 ~0.8 A

Power consump on| 0.5 W
Charging me| 2 Hours
Running me| 12 Hours
Standby me| 30 days
Ba ery Life| 3 years
Handle Size| 245.4 x 70.7 x 70.7 mm / 9.66 x 2.78 x 2.78 inch
Weight| 4 kg / 8.8 lb
Material| ABS, PC, Iron, EV
Opera on Temperature| -20–45 C
Storage Temperature| -20–45 C

FCC Statement

FCC ID: 2AJVKMO-SSD5
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not .cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• I increased the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
  ©2022 MOTAG®, ALL RIGHTS RESERVED.
  The information contained in this user manual and all accompanying documentation is copyrighted and all rights are reserved.

Product Limited Warranty

The MOTAG® Limited 1 Year Warranty guarantees the original purchaser the that the pr oduct is free from any defect, in material and workmanship, in conjunction with the original purchaser using the product according to an y accompanying labels and instructions. THIS GUARANTEE IS VALID FOR ONE YEAR FROM THE ORIGINAL DATE OF PURCHASE. MOTAG® agrees that it will, at its discretion, either repair the defect or replace the defective product, or part thereof, at no charge to the purchaser, for parts or labor, for the time period stated.
This limited warranty does not cover any damage caused by accident, misuse, modication, or normal wear and tear, and is limited to the value of the product. The limited warranty described herein is in addition to applicable law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD FROM THE DATE OF ORIGINAL PURCHASE SET FORTH. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein or to extend the duration of any warranties beyond the time period described herein on the behalf of MOTAG®.
The warranties described herein shall be the sole and exclusive warranties granted by MOTAG® and shall be the sole and exclusive remedy available to the purchaser. Corrections of defects, in the manner and for the period of time described herein, shall constitute complete fulllment of all liabilities and responsibilities of MOTAG® to the purchaser with respect to the product and shall constitute full satisfaction of all claims, whether based on contract negligence, strict liability or otherwise. In no event shall MOTAG® be liable or in any way responsible, for an incidental of consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. THIS LIMITED WARRANTY, GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE.
If you have any questions, please contact MOTAG at
support@motag.com or visit www.motag.com.

References

• Motag Motion Agility – motag.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>