CANYON Li-Polymer Power Bank, 8000 mAh User Guide

: June 7, 2024
: CANYON

Table of Contents

Specifications
Troubleshooting
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CANYON Li-Polymer Power Bank, 8000 mAh

CANYON Li-Polymer Power Bank, 8000 mAh CANYON Li-
Polymer Power Bank, 8000 mAh - 1 Package Contents

Note: Any power bank will not deliver full-declared capacity to your device some of this energy is lost through heat generated and voltage conversion. Please, check the specification of your phone or tablet’s battery to estimate how many full charges you can expect. If not stated otherwise expect to achieve around 70% of efficiency.

Warranty
For detailed information regarding warranty terms, please refer to: http://canyon.eu/warranty-terms/

All other products names and trademarks are property of their respective owners
www.canyon.eu

Dear customer!
Congratulations on your purchase of the TM Canyon device. It is recommended that the user read this manual entirely in order to make full use of the product. For more information about Canyon products, please visit our website: http://canyon.eu

Owner’s manual. Power bank (hereinafter referred to as PB)

Specifications

Battery Type: Li-Polymer
Capacity : 8000 mAh / 3.7V
Input : 5V-2A (Micro-USB/Type-C)
Output : 5V-2A (2*USB)
Wireless : 5W

1. Package (pic. 1)
1.1 Power bank
1.2 Micro-USB cable
1.3 Owner’s manual

2. LED indicators (pic. 2)
2.1 Battery-power LED indicators will turn on by pressing lightly the power button.

3. Power bank charging (pic. 3)
3.1 Connect the compatible USB charger (purchased separately) to the wall outlet/ computer. Connect micro-USB/USB Type-C connector to PB charger connector. The light indicators will turn on and the LED indicator will blink throughout the battery charging process, indicating its stage. When the battery is fully charged, all the indicators will turn on. 3.2 When the battery is fully charged, firstly disconnect the compatible charger from the PB, and then remove it from the power outlet. Hold the plug, but not the cord when disconnecting the charger.

4. USB device charging (pic. 4)
4.1 Connect your device to PB using the cable that comes with the power bank or your mobile phone/ tablet.
4.2 Press the ON/OFF button once.
4.3 The illuminated LED indicator on PB indicates the charging process. As the external battery is discharged, more indicators will turn off on it. When your device is fully charged, the battery will turn off.

5. Wireless charging
5.1 Put your device which supports wireless charging with its antenna on a power bank and turn it on (see 5)
5.2 Make sure the wireless charging antenna of your device is directly matching the wireless charging symbol on the power bank’s housing

SAFETY INSTRUCTIONS
Read and follow all the instructions before using the product: 1) Do not expose PB to excessive moisture, water, or dust. Do not install in locations with high moisture or dust.
2) Protect the device from heat: do not install it near heaters and do not expose it to direct sunlight.
3) The product is to be connected to the power supply of the type specified in the owner’s manual only.
4) Clean the device only with a dry cloth.

WARNING

Do not disassemble the enclosure. The battery may explode when damaged. It is not recommended to attempt to repair the device yourself, which will result in the loss of warranty.
The power bank must be stored in a location with a temperature ranging between 15 to 25°C for optimal performance. Too high/low-temperature results in the loss of capacity and shorter lifetime of the battery. A device with an excessively heated or cooled battery may not work temporarily.
Do not dispose of batteries in a fire as they may explode.

Manufacturer: Asbisc Enterprises PLC, 43, Diamond Court, Kolonakiou Str, 4303, Limassol, Cyprus, Agios Athanasios, http://canyon.eu/
Disposal: Bring the used electronic products, batteries, and packaging to the recycling collection points.

WARRANTY RESPONSIBILITY
The warranty period starts from the date of purchase of the product from the authorized Canyon distributor. The date of purchase is specified on your sales receipt or delivery note. Repair, replacement, or refunds within the period of warranty are made at the discretion of Canyon. To obtain warranty service the product is to be returned to the distributor at the place of purchase together with a proof of purchase (sales receipt or delivery note). Further information regarding the use and warranty terms is available on the site: http://canyon.eu/warranty-terms/

Troubleshooting

CANYON Li-Polymer Power Bank, 8000 mAh -
Troubleshooting

If the above-listed measures do not help to resolve the problem, please contact
the support service on the Canyon website: http://canyon.eu/ask- yourquestion/.