ZHIYUN CRANE 3S Handheld Stabilizer User Manual
- June 3, 2024
- ZHIYUN
Table of Contents
ZHIYUN CRANE 3S Handheld Stabilizer
Product Introduction
The S1 Handheld Stabilizer’s gyroscopes provide high-precision stabilization for handheld scanning, helping to avoid loss of tracking and providing a smoother scan. The motorized axes allow you to smoothly pan or tilt the scanner as you move around the object.
Specifications
| Product Name | Handheld Stabilizer |
|---|---|
| Model | S1 |
| Compatible Devices | MINI |
| Power Output | 5V/2A |
| Dimension | 213mm x 84.5mm x 45mm |
| Net Weight | 510g |
| Battery Type | Lithium |
| Battery Capacity | 4000mAh |
| Operating Time | Around 6 hours |
| Recharging Time | 4.5 hours |
| Stabilized Axes | 2 |
| Controllable Range | Tilt ±45°; Pan ±85° |
| Connection Type | Bluetooth |
| Charging Port Type | USB Type-C |
| Working Temperature | 10°C‒40°C |
| Package List | Handheld Stabilizer x1, Type-A to C USB Cable x1, Bracket x1, |
Strap x1
Note| *Operating time may vary depending on different scenarios and
environments.
Functions Overview
- Bluetooth LED: The LED light flashes blue continuously while waiting for a connection. Once connected successfully, the LED turns solid blue.
- Joystick: Adjusts the tilt and pan.
- 1/4 Threaded Hole: To mount the phone holder bracket.
- ON/OFF Switch: Long-press to power on/off the Handheld Stabilizer. Press twice to change between Follow/Lock Mode.
- Battery Level LED: Shows the remaining battery level. The LED light flashes continuously when charging and turns solid white when fully charged.
- Start/Pause Button: Press to start or pause the scan. Press twice to recenter the Handheld Stabilizer.
Follow Mode: The stabilizer follows the object automatically.
Lock Mode: The stabilizer locks itself in a fixed position.
Charging the Handheld Stabilizer
- Connect the USB-Type-A end of the cable to an adapter, then plug it into a socket.
- Plug the USB-Type-C end into the Handheld Stabilizer’s Type-C port.
- The Handheld Stabilizer is fully charged when the battery LED turns solid white.
Connecting the Handheld Stabilizer to MINI 3D Scanners
- Clip the MINI into the quick-release slot on top of the Handheld Stabilizer.
- Connect and secure the Micro-B USB cable to the scanner.
For freedom of movement, connecting the MINI via Wi-Fi is recommended when using the Handheld Stabilizer.
Using the Handheld Stabilizer with a PC via Wi-Fi
Power on the Handheld Stabilizer
Long-press the ON/OFF button to power on the Handheld Stabilizer. The
Bluetooth LED flashes blue continuously when it is ready for connection.
Adding the Handheld Stabilizer via Bluetooth
Open your PC’s Bluetooth settings and look for a device named
“REVO_STABILIZER”, then click Connect to add the Handheld Stabilizer.
Connecting to a PC’s Wi-Fi with MINI
Open the PC’s Wi-Fi settings and connect to the MINI’s Wi-Fi SSID.
Open Revo Scan to Start your Scan
- Adjust the scanner’s position with the Handheld Stabilizer joystick.
- Press the Handheld Stabilizer’s Start/Pause button to begin scanning.
Using the Handheld Stabilizer with a Smartphone via Wi-Fi
Attaching the bracket and phone holder
- Insert and screw the bracket into the Handheld Stabilizer’s 1/4 threaded hole.
- Attach the Phone Holder to the bracket
- Insert your phone into the clamp.
Note: Use the Phone Holder that came with your MINI
Connecting to a smartphone’s Wi-fi with MINI
Open the smartphone’s Wi-FI settings and connect to the MINI’s Wi-Fi SSID.
Open Revo Scan to Start your Scan
- Adjust the scanner’s position with the Handheld Stabilizer joystick.
- Press the Handheld Stabilizer’s Start/Pause button to begin scanning.