Livoo DOS196 Multifunction Hair Clipper and Beard and body Trimming Set Instructions
- June 3, 2024
- Livoo
Table of Contents
Livoo DOS196 Multifunction Hair Clipper and Beard and body Trimming Set Instructions
Thank you for choosing a Livoo product!
Your blender, your barbecue, and your headphones are not just objects, they are extensions of yourself, allowing you to get closer to your friends and family, to bring them together, to laugh and to share experiences. Livoo’s aim is to help you live your life to the fullest, whatever wishes you have throughout the year. Winter raclette, summer barbecue. Or the other way around. It’s up to you. Take advantage of this freedom for feel good moments every day. That’s why we’re constantly innovating and creating clever products full of zest, but most of all, accessible. Find our entire collection on our website www.livoo.en.
Livoo, your daily companion till social networks
Safety Instructions
Please, take time to read well the instruction sheet before the first use and keep them for a future use.
A misuse of the appliance can damage it or hurt the user. Assure that you use the appliance for the use for which it is designed. We refuse any responsibilities as for the damages by an incorrect use or a bad manipulation.
WARNING ! To reduce the risk of electric shock:
-
Do not use this appliance nearby water! WARNING: Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
-
Do not immerse the product in water.
-
Always unplug the USB cable from the unit immediately after use unless it is being charged.
-
Unplug the unit before cleaning it.
WARNING ! To reduce the risk of burns, fire, electric shock or injury to persons: -
This appliance is for household use only.
-
Close supervision is necessary when this appliance is used by, on, or near children or invalids.
-
Please read the instruction carefully before using
-
Do not disassemble or refit the product.
-
If the product or any part is damaged, do not re-use.
-
Do not use the product near wound, inflammatory or allergic areas.
-
Keep this product out of reach of children.
-
Hair clipper can be used by children aged from 3 years under supervision.
-
Shaver, wet shaver, animal clipper, hair clipper and appliances for manicure and pedicure can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision
-
This product is not a toy.
-
WARNING: For the purposes of charging, only use the detachable USB cable provided.
-
Switch the appliance off and unplug it after each use and before cleaning.
-
Never leave the appliance unsupervised, particularly if children are around. WARNING
-
Keep the appliance dry.
-
This appliance contains batteries that are nonreplaceable.
-
This appliance must only be supplied at safety extra low voltage corresponding to the marking on the appliance.
-
If you use adaptor ( not supplied), only to be used together with a certified power supply with DC 5V/1A SELV. Adaptor with pins for insertion into socket outlets shall be at least IPX4.
-
This appliance is intended to be used in household and similar applications such as:
- Staff kitchen areas in shops, offices and other working environments
- Farm houses
- By clients in hotels, motels and other residential type environments
- Bed and breakfast type environments
Technical Specifications
Power: 5V 1 A / 5W.
Battery Li-ion 600 mAh. IPX6
Autonomy: 90 minutes
Cleaning and maintenance
Clean your beard trimmer regularly. A regular care of your rechargeable beard trimmer and its accessories will extend the life of your equipment.
AFTER EACH USE Ensure that the beard trimmer is switched off. Clean the product using cloth which is slightly dampened in water. Do not use abrasive cleansers on the equipment, on the comb or its blade. Never use hair dryer or a heater to dry the product.
Brush cleaning The trimming comb can be removed from the main body (trimmer) and cleaned using cleaning brush available in the box (fig 15-16). Brush off carefully and blow, if necessary, to remove the remaining beard hair on the blade. Do not use wire or abrasive brush so as not to damage the beard trimmer.
Caution on lubrication Apply only light oil like the one supplied in this kit. Lubricating is must in the space between stationary and moving blades with 1-2 drops of oil which keep blades sharpness and enhance operating time.
Comb washing Remove the comb. Rinse it under clean running water. Allow it to dry completely.
Drawing of the device
Figure A
Use of the device
Charging instructions
For best performance, fully charge the device before use. Insert the tip of
your cable into the device and the USB end into the device of your choice
(computer, adapter, external battery, etc.). If you choose to charge your
device via computer, the charging time will be longer. With an external
battery or mobile phone adapter, charging will take 8 hours. If you want to
use your product with an adapter (not included) instead of the USB cable (fig
17-18), please respect the voltage and current mentioned on the product (5V,
1A). When the product is charging the number will increase and the red light
will be always on. 99 number light up once the device is fully charged, and
red light will go off. Note : The product may become slightly warm while
charging. Your device cannot be overcharged. However if the product is not
going to be used for an extended period time ( 2-3months), unplug it and store
it. Fully recharge it when you would like to use it again.
Adjusting the appliance:
To remove the heads parts check fig 1-2.
When fitting the head of the appliance, push the bottom of the head into the
small notch and press until it clicks into place (fig. 3-4).
To attach the full-size trimmer, do the same until it is locked to the unit
(fig. 5-6). There are four positioning combs with four levels as below:
Remove the full size trimmer by pushing it forward ( fig 7-8) Remove the shaving head by pushing it forward (fig 9). Attach the shaving head by pushing it into the small notch and press until it clicks into place (fig 10). Note: Always attach the comb BEFORE switching on the beard trimmer and ensure that the beard trimmer is switched off when putting or removing the comb attachment.
Adjusting precision trimmer comb:
Using instructions
Instructions for beard/moustache trimming ( fig 23-24) For even cutting,
allow the comb attachment/blade to cut its way through the beard/moustache
hair. Do not force it through quickly. If you are cutting for the first time,
start with the maximum comb length attachment.
To thin and taper the beard/moustache
– Turn the unit on.
– Select the desired length setting on the adjustable comb.
– Place the flat top of the trimmer comb against the skin.
– Slowly slide the through the hair. Repeat from different directions, as
necessary.
Note: Remove trimmer comb attachment if you if you want to define hairlines edges such as sideburns, trimming the nape of your neck, trimming your beard line or front of neck.
To define the beard/moustache ( fig 19-20)
Hold your device with precision trimmer blade facing you, start with edge of
beard/moustache line and gently lower the trimmer onto your skin. Use motions
towards edge of beard/moustache line to trim to desired location in facial
area and away from beard in neck area.
To use design trimmer ( fig 25)
Attach design trimmer head Then begin your design by removing hair according
to the shape you have chosen. You can use it to remove hair from eyebrows (fig
26).
To use body trimmer ( fig 27-28)
Attach body trimmer head and remove the hair where you like.
To remove hair from nose and ear ( fig 29)
Attach nose trimmer head Insert the nose trimmer gently into nostril or ear
and move it in and out at the same time rotate. Avoid inserting the cutting
part more than 6 mm into nostril or ear.
To use the micro shaver trimmer (fig 30)
Attach the micro shaver trimmer Hold the clipper so that the micro shaver
gently touches your face in a 45-degree angle. Use short well controlled
movements to shave around beard/moustache, with your free hand stretch your
skin so that the hair stands upright, making it easier to shave.
Correct disposal of the unit (Electrical and Electronic Equipment). (Applicable in the European Union and the rest of Europe that have adopted separate collection systems countries). The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal household waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The symbol of the crossed out dustbin is marked on all products to remind the obligations of separate collection. Consumers should contact their local authority or retailer for information concerning the correct disposal of their product.
LIVOO
BP 61071
67452 Mundolsheim – FRANCE
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>